lkml.org 
[lkml]   [2021]   [Oct]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 1/2] arm64: dts: rockchip: Enable HDD power on helios64
Tested-by: Dennis Gilmore <dgilmore@redhat.com>

On Thu, Oct 28, 2021 at 11:37 AM Florian Klink <flokli@flokli.de> wrote:
>
> This adds the hdd_{a,b}_power blocks present in the armbian helios64
> dts. [1]
>
> Without those powered up, no HDDs will appear (except one connected via
> the m.2 slot).
>
> From https://wiki.kobol.io/helios64/sata/#hdd-power:
>
> > The power delivery of the HDDs is divided into two group:
> >
> > HDD Rail A (Max. 3x Drives)
> > HDD Rail B (Max. 2x Drives)
> >
> > Helios64 implements a power staggering approach where HDD Rail A will be
> > powered up first, then few seconds later HDD Rail B will be powered up.
> > This power control scenario is performed to reduce the inrush current
> > during disk spin-up.
>
> In practice, this power staggering approach will be included in the
> bootloader (not in the kernel), as we might want to boot from a SATA
> drive.
>
> From my experiments, if the bootloader doesn't implement the power
> staggering, only one HDD will get recognized (probably cause the others
> didn't boot due to few power).
>
> Still, it makes sense to expose this block in the device-tree, so the
> kernel can ensure both rails are on (and this can be shared with
> u-boot).
>
> [1] https://github.com/armbian/build/blob/744ea89a589d62cb6f409baab60fc6664520bc39/patch/kernel/archive/rockchip64-5.14/add-board-helios64.patch
>
> Signed-off-by: Florian Klink <flokli@flokli.de>
> ---
> .../dts/rockchip/rk3399-kobol-helios64.dts | 32 +++++++++++++++++++
> 1 file changed, 32 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts b/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts
> index 738cfd21df3e..93745dcc2af6 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts
> @@ -82,6 +82,30 @@ led-1 {
> };
> };
>
> + hdd_a_power: hdd-a-power {
> + compatible = "regulator-fixed";
> + enable-active-high;
> + gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
> + pinctrl-0 = <&hdd_a_power_en>;
> + pinctrl-names = "default";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-name = "hdd_a_power";
> + startup-delay-us = <2000000>;
> + };
> +
> + hdd_b_power: hdd-b-power {
> + compatible = "regulator-fixed";
> + enable-active-high;
> + gpio = <&gpio1 RK_PA1 GPIO_ACTIVE_HIGH>;
> + pinctrl-0 = <&hdd_b_power_en>;
> + pinctrl-names = "default";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-name = "hdd_b_power";
> + startup-delay-us = <2000000>;
> + };
> +
> pcie_power: pcie-power {
> compatible = "regulator-fixed";
> enable-active-high;
> @@ -422,6 +446,14 @@ pmic_int_l: pmic-int-l {
> };
>
> power {
> + hdd_a_power_en: hdd-a-power-en {
> + rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> +
> + hdd_b_power_en: hdd-b-power-en {
> + rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> +
> vcc5v0_usb_en: vcc5v0-usb-en {
> rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
> };
> --
> 2.33.0
>


--
Dennis Gilmore
Multiple Architecture Portfolio Enablement
T: +1-312-660-3523

\
 
 \ /
  Last update: 2021-10-29 02:09    [W:0.238 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site