lkml.org 
[lkml]   [2021]   [Oct]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v1 0/2] ACPI: scan: Honor certain device identification rules
On Wed, Oct 27, 2021 at 08:12:20PM +0200, Rafael J. Wysocki wrote:
> On Wed, Oct 27, 2021 at 7:35 PM Andy Shevchenko
> <andriy.shevchenko@linux.intel.com> wrote:
> > On Tue, Oct 26, 2021 at 10:33:17PM +0300, Andy Shevchenko wrote:
> > > On Tue, Oct 26, 2021 at 08:51:49PM +0200, Rafael J. Wysocki wrote:

...

> > > From the practice I would wait for some tests. I will try to find any new
> > > information about latest firmware tables on Elkhart Lake machines.
> >
> > So, what I see in Elkhart Lake
> >
> > Case 1 - Sound Wire devices (2 times):
> >
> > Name (_ADR, 0x40000000) // _ADR: Address
>
> No _HID, so the IDs returned by the _CID below won't be used.
>
> > Name (_CID, Package (0x02) // _CID: Compatible ID
> > {
> > "PRP00001",
>
> The above device ID is invalid (one 0 too many).

Probably we have to communicate this to EHL program owners internally...
I dunno what this means in case of Sound Wire.

> > "PNP0A05" /* Generic Container Device */
>
> Without the change this causes a container device to be created, but
> the only purpose of it may be offline/online (if the child devices
> support offline/online).
>
> This change should not be functionally relevant.
>
> > })
> >
> > Case 2 - GP DMA devices (3 times):
> >
> > Name (_ADR, 0x001D0003) // _ADR: Address
>
> _ADR will be ignored which may not be expected. Is this a PCI device?

It depends on the BIOS decision at boot time. No idea if it's only one
possibility (what I have heard is that device is PCI enumerated, that's
why they chose PCI ID in the CSRT, to avoid allocating new IDs for truly
ACPI-enumerated device).

But seems another point to discuss internally.

> > Name (_HID, "80864BB4") // _HID: Hardware ID
> >
> > Case 3 - Camera PMIC devices (5 x 2 (CLPn/DSCn) + 1 (PMIC) times = 11x):
> >
> > Name (_ADR, Zero) // _ADR: Address
>
> _ADR will be ignored, which shouldn't matter.
>
> > Name (_HID, "INT3472") // _HID: Hardware ID
> > Name (_CID, "INT3472") // _CID: Compatible ID
> >
> > Case 4 - LNK devices (6 times):
> >
> > Name (_ADR, Zero) // _ADR: Address
>
> Same here.
>
> > ...
> >
> > Name (_UID, One) // _UID: Unique ID
> > Method (_HID, 0, NotSerialized) // _HID: Hardware ID
> > {
> > Return (HCID (One))
> > }
> >
> > Case 5 - Camera sensors (2 times):
> >
> > Name (_ADR, Zero) // _ADR: Address
>
> And same here.
>
> > Name (_HID, "INT34xx") // _HID: Hardware ID
> > Name (_CID, "INT34xx") // _CID: Compatible ID
> >
> > I have no idea about cameras or audio devices, but what I'm worrying about
> > is GP DMA. This kind of devices are PCI, but due to Microsoft hack, called
> > CSRT, we have to have a possibility to match DSDT with CSRT ot retrieve
> > the crucial information from the latter while being enumerated by the former.
> >
> > While it may be against the specification, there is no other way to achieve
> > that as far as I understand (without either breaking things in Linux or
> > getting yellow bang in Windows).
>
> I'm not really sure why _HID is needed for this. The PCI device ID
> could be used for CRST matching just fine.
>
> > Can you confirm that your change won't modify behaviour for these devices?
>
> Well, the GP DMA thing may be broken by patch [2/2], but does Windows
> actually use _ADR if _HID is provided?

No idea. Let's discuss internally.

P.S. The issue here is that some BIOS versions are floating around and
we never know who is using what... :-(

--
With Best Regards,
Andy Shevchenko


\
 
 \ /
  Last update: 2021-10-27 21:30    [W:0.057 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site