lkml.org 
[lkml]   [2021]   [Oct]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3] ACPI, APEI, EINJ: Relax platform response timeout to 1 second.
On Tue, Oct 26, 2021 at 7:05 PM Luck, Tony <tony.luck@intel.com> wrote:
>
> On Tue, Oct 26, 2021 at 03:28:29PM +0800, Shuai Xue wrote:
> > When injecting an error into the platform, the OSPM executes an
> > EXECUTE_OPERATION action to instruct the platform to begin the injection
> > operation. And then, the OSPM busy waits for a while by continually
> > executing CHECK_BUSY_STATUS action until the platform indicates that the
> > operation is complete. More specifically, the platform is limited to
> > respond within 1 millisecond right now. This is too strict for some
> > platforms.
> >
> > For example, in Arm platform, when injecting a Processor Correctable error,
> > the OSPM will warn:
> > Firmware does not respond in time.
> >
> > And a message is printed on the console:
> > echo: write error: Input/output error
> >
> > We observe that the waiting time for DDR error injection is about 10 ms and
> > that for PCIe error injection is about 500 ms in Arm platform.
> >
> > In this patch, we relax the response timeout to 1 second.
> >
> > Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
>
> Reviewed-by: Tony Luck <tony.luck@intel.com>
>
> Rafael: Do you want to take this in the acpi tree? If not, I can
> apply it to the RAS tree (already at -rc7, so in next merge cycle
> after 5.16-rc1 comes out).

I'll queue it up for 5.16.

Thanks!

> > ---
> > Changelog v2 -> v3:
> > - Implemented the timeout in usleep_range instead of msleep.
> > - Dropped command line interface of timeout.
> > - Link to the v1 patch: https://lkml.org/lkml/2021/10/14/1402
> > ---
> > drivers/acpi/apei/einj.c | 15 ++++++++-------
> > 1 file changed, 8 insertions(+), 7 deletions(-)
> >
> > diff --git a/drivers/acpi/apei/einj.c b/drivers/acpi/apei/einj.c
> > index 133156759551..6e1ff4b62a8f 100644
> > --- a/drivers/acpi/apei/einj.c
> > +++ b/drivers/acpi/apei/einj.c
> > @@ -28,9 +28,10 @@
> > #undef pr_fmt
> > #define pr_fmt(fmt) "EINJ: " fmt
> >
> > -#define SPIN_UNIT 100 /* 100ns */
> > -/* Firmware should respond within 1 milliseconds */
> > -#define FIRMWARE_TIMEOUT (1 * NSEC_PER_MSEC)
> > +#define SLEEP_UNIT_MIN 1000 /* 1ms */
> > +#define SLEEP_UNIT_MAX 5000 /* 5ms */
> > +/* Firmware should respond within 1 seconds */
> > +#define FIRMWARE_TIMEOUT (1 * USEC_PER_SEC)
> > #define ACPI5_VENDOR_BIT BIT(31)
> > #define MEM_ERROR_MASK (ACPI_EINJ_MEMORY_CORRECTABLE | \
> > ACPI_EINJ_MEMORY_UNCORRECTABLE | \
> > @@ -171,13 +172,13 @@ static int einj_get_available_error_type(u32 *type)
> >
> > static int einj_timedout(u64 *t)
> > {
> > - if ((s64)*t < SPIN_UNIT) {
> > + if ((s64)*t < SLEEP_UNIT_MIN) {
> > pr_warn(FW_WARN "Firmware does not respond in time\n");
> > return 1;
> > }
> > - *t -= SPIN_UNIT;
> > - ndelay(SPIN_UNIT);
> > - touch_nmi_watchdog();
> > + *t -= SLEEP_UNIT_MIN;
> > + usleep_range(SLEEP_UNIT_MIN, SLEEP_UNIT_MAX);
> > +
> > return 0;
> > }
> >
> > --
> > 2.20.1.12.g72788fdb
> >

\
 
 \ /
  Last update: 2021-10-27 20:25    [W:0.066 / U:0.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site