lkml.org 
[lkml]   [2021]   [Oct]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/4] pinctrl: pinconf-generic: Add support for "output-impedance-ohms" to be extracted from DT files
Date
Add "output-impedance-ohms" property to generic options used for DT
parsing files. This enables drivers, which use generic pin configurations,
to get the value passed to this property.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
---
RFC->v1
* Renamed PIN_CONFIG_OUTPUT_IMPEDANCE -> PIN_CONFIG_OUTPUT_IMPEDANCE_OHMS
* Renamed output-impedance to output-impedance-ohms
* Included RB tags
* Updated description and commit message
---
drivers/pinctrl/pinconf-generic.c | 2 ++
include/linux/pinctrl/pinconf-generic.h | 3 +++
2 files changed, 5 insertions(+)

diff --git a/drivers/pinctrl/pinconf-generic.c b/drivers/pinctrl/pinconf-generic.c
index 22e8d4c4040e..f8edcc88ac01 100644
--- a/drivers/pinctrl/pinconf-generic.c
+++ b/drivers/pinctrl/pinconf-generic.c
@@ -46,6 +46,7 @@ static const struct pin_config_item conf_items[] = {
PCONFDUMP(PIN_CONFIG_MODE_LOW_POWER, "pin low power", "mode", true),
PCONFDUMP(PIN_CONFIG_OUTPUT_ENABLE, "output enabled", NULL, false),
PCONFDUMP(PIN_CONFIG_OUTPUT, "pin output", "level", true),
+ PCONFDUMP(PIN_CONFIG_OUTPUT_IMPEDANCE_OHMS, "output impedance", "ohms", true),
PCONFDUMP(PIN_CONFIG_POWER_SOURCE, "pin power source", "selector", true),
PCONFDUMP(PIN_CONFIG_SLEEP_HARDWARE_STATE, "sleep hardware state", NULL, false),
PCONFDUMP(PIN_CONFIG_SLEW_RATE, "slew rate", NULL, true),
@@ -179,6 +180,7 @@ static const struct pinconf_generic_params dt_params[] = {
{ "output-disable", PIN_CONFIG_OUTPUT_ENABLE, 0 },
{ "output-enable", PIN_CONFIG_OUTPUT_ENABLE, 1 },
{ "output-high", PIN_CONFIG_OUTPUT, 1, },
+ { "output-impedance-ohms", PIN_CONFIG_OUTPUT_IMPEDANCE_OHMS, 0 },
{ "output-low", PIN_CONFIG_OUTPUT, 0, },
{ "power-source", PIN_CONFIG_POWER_SOURCE, 0 },
{ "sleep-hardware-state", PIN_CONFIG_SLEEP_HARDWARE_STATE, 0 },
diff --git a/include/linux/pinctrl/pinconf-generic.h b/include/linux/pinctrl/pinconf-generic.h
index eee0e3948537..2422211d6a5a 100644
--- a/include/linux/pinctrl/pinconf-generic.h
+++ b/include/linux/pinctrl/pinconf-generic.h
@@ -91,6 +91,8 @@ struct pinctrl_map;
* configuration (eg. the currently selected mux function) drive values on
* the line. Use argument 1 to enable output mode, argument 0 to disable
* it.
+ * @PIN_CONFIG_OUTPUT_IMPEDANCE_OHMS: this will configure the output impedance
+ * of the pin with the value passed as argument. The argument is in ohms.
* @PIN_CONFIG_PERSIST_STATE: retain pin state across sleep or controller reset
* @PIN_CONFIG_POWER_SOURCE: if the pin can select between different power
* supplies, the argument to this parameter (on a custom format) tells
@@ -129,6 +131,7 @@ enum pin_config_param {
PIN_CONFIG_MODE_PWM,
PIN_CONFIG_OUTPUT,
PIN_CONFIG_OUTPUT_ENABLE,
+ PIN_CONFIG_OUTPUT_IMPEDANCE_OHMS,
PIN_CONFIG_PERSIST_STATE,
PIN_CONFIG_POWER_SOURCE,
PIN_CONFIG_SKEW_DELAY,
--
2.17.1
\
 
 \ /
  Last update: 2021-10-27 15:46    [W:0.124 / U:0.376 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site