lkml.org 
[lkml]   [2021]   [Oct]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v5 3/6] drm/mediatek: Detect CMDQ execution timeout
Hi Jason,

On Wed, Oct 27, 2021 at 10:19 AM jason-jh.lin <jason-jh.lin@mediatek.com> wrote:
>
> From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
>
> CMDQ is used to update display register in vblank period, so
> it should be execute in next 2 vblank. One vblank interrupt
> before send message (occasionally) and one vblank interrupt
> after cmdq done. If it fail to execute in next 3 vblank,
> tiemout happen.
>
> Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
> Signed-off-by: jason-jh.lin <jason-jh.lin@mediatek.com>
> Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
> ---
> drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 20 ++++++++++++++++++--
> 1 file changed, 18 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
> index e23e3224ac67..dad1f85ee315 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
> @@ -54,6 +54,7 @@ struct mtk_drm_crtc {
> #if IS_REACHABLE(CONFIG_MTK_CMDQ)
> struct cmdq_client cmdq_client;
> u32 cmdq_event;
> + u32 cmdq_vblank_cnt;
> #endif
>
> struct device *mmsys_dev;
> @@ -227,7 +228,10 @@ struct mtk_ddp_comp *mtk_drm_ddp_comp_for_plane(struct drm_crtc *crtc,
> static void ddp_cmdq_cb(struct mbox_client *cl, void *mssg)
> {
> struct cmdq_cb_data *data = mssg;
> + struct cmdq_client *cmdq_cl = container_of(cl, struct cmdq_client, client);
> + struct mtk_drm_crtc *mtk_crtc = container_of(cmdq_cl, struct mtk_drm_crtc, cmdq_client);
>
> + mtk_crtc->cmdq_vblank_cnt = 0;
> cmdq_pkt_destroy(data->pkt);
> }
> #endif
> @@ -483,6 +487,15 @@ static void mtk_drm_crtc_update_config(struct mtk_drm_crtc *mtk_crtc,
> cmdq_handle->pa_base,
> cmdq_handle->cmd_buf_size,
> DMA_TO_DEVICE);
> + /*
> + * CMDQ command should execute in next 3 vblank.
> + * One vblank interrupt before send message (occasionally)
> + * and one vblank interrupt after cmdq done,
> + * so it's timeout after 3 vblank interrupt.
> + * If it fail to execute in next 3 vblank, timeout happen.
> + */
> + mtk_crtc->cmdq_vblank_cnt = 3;
> +
> mbox_send_message(mtk_crtc->cmdq_client.chan, cmdq_handle);
> mbox_client_txdone(mtk_crtc->cmdq_client.chan, 0);
> }
> @@ -499,11 +512,14 @@ static void mtk_crtc_ddp_irq(void *data)
>
> #if IS_REACHABLE(CONFIG_MTK_CMDQ)
> if (!priv->data->shadow_register && !mtk_crtc->cmdq_client.chan)
> + mtk_crtc_ddp_config(crtc, NULL);
> + else if (mtk_crtc->cmdq_vblank_cnt > 0 && --mtk_crtc->cmdq_vblank_cnt == 0)
I think atomic_dec_and_test() does what you want to do here.




> + DRM_ERROR("mtk_crtc %d CMDQ execute command timeout!\n",
> + drm_crtc_index(&mtk_crtc->base));
> #else
> if (!priv->data->shadow_register)
> -#endif
> mtk_crtc_ddp_config(crtc, NULL);
> -
> +#endif
> mtk_drm_finish_page_flip(mtk_crtc);
> }
>
> --
> 2.18.0
>

\
 
 \ /
  Last update: 2021-10-27 11:33    [W:0.393 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site