lkml.org 
[lkml]   [2021]   [Oct]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v7 2/3] drm/bridge: ti-sn65dsi86: Use regmap_bulk_write API
Hey Bjorn,

On Mon, 25 Oct 2021 at 19:07, Bjorn Andersson
<bjorn.andersson@linaro.org> wrote:
>
> The multi-register u16 write operation can use regmap_bulk_write()
> instead of two separate regmap_write() calls.
>
> It's uncertain if this has any effect on the actual updates of the
> underlying registers, but this at least gives the hardware the
> opportunity and saves us one transation on the bus.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Did you miss including Dougs R-B from v6? As far as I can tell nothing
else changed between v6 & v7.

> ---
>
> Changes since v6:
> - None
>
> drivers/gpu/drm/bridge/ti-sn65dsi86.c | 5 +++--
> 1 file changed, 3 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/ti-sn65dsi86.c b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
> index 6154bed0af5b..5b59d8dd3acd 100644
> --- a/drivers/gpu/drm/bridge/ti-sn65dsi86.c
> +++ b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
> @@ -193,8 +193,9 @@ static const struct regmap_config ti_sn65dsi86_regmap_config = {
> static void ti_sn65dsi86_write_u16(struct ti_sn65dsi86 *pdata,
> unsigned int reg, u16 val)
> {
> - regmap_write(pdata->regmap, reg, val & 0xFF);
> - regmap_write(pdata->regmap, reg + 1, val >> 8);
> + u8 buf[2] = { val & 0xff, val >> 8 };
> +
> + regmap_bulk_write(pdata->regmap, reg, buf, ARRAY_SIZE(buf));
> }
>
> static u32 ti_sn_bridge_get_dsi_freq(struct ti_sn65dsi86 *pdata)
> --
> 2.29.2
>

\
 
 \ /
  Last update: 2021-10-27 10:32    [W:0.117 / U:0.852 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site