lkml.org 
[lkml]   [2021]   [Oct]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] watchdog: iTCO: Drop vendor support
From
Date
On 10/8/21 8:26 AM, Guenter Roeck wrote:
> iTCO vendor support was introduced in 2006 to support SuperMicro boards
> with Pentium 3 CPUs. It was extended in 2009 to support motherbords
> with broken BIOS (specifically Intel DG33TL). The code is long since
> obsolete, so let's drop support for it.
>
> Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Wim - this patch is buggy. Please don't apply it.

Guenter

> ---
> .../watchdog/watchdog-parameters.rst | 7 -
> drivers/watchdog/Kconfig | 8 -
> drivers/watchdog/Makefile | 3 -
> drivers/watchdog/iTCO_vendor.h | 14 --
> drivers/watchdog/iTCO_vendor_support.c | 216 ------------------
> drivers/watchdog/iTCO_wdt.c | 17 --
> 6 files changed, 265 deletions(-)
> delete mode 100644 drivers/watchdog/iTCO_vendor.h
> delete mode 100644 drivers/watchdog/iTCO_vendor_support.c
>
> diff --git a/Documentation/watchdog/watchdog-parameters.rst b/Documentation/watchdog/watchdog-parameters.rst
> index 223c99361a30..60ecbd53e6aa 100644
> --- a/Documentation/watchdog/watchdog-parameters.rst
> +++ b/Documentation/watchdog/watchdog-parameters.rst
> @@ -219,13 +219,6 @@ iTCO_wdt:
>
> -------------------------------------------------
>
> -iTCO_vendor_support:
> - vendorsupport:
> - iTCO vendor specific support mode, default=0 (none),
> - 1=SuperMicro Pent3, 2=SuperMicro Pent4+, 911=Broken SMI BIOS
> -
> --------------------------------------------------
> -
> ib700wdt:
> timeout:
> Watchdog timeout in seconds. 0<= timeout <=30, default=30.
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index bf59faeb3de1..3fae89be0e27 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -1233,14 +1233,6 @@ config ITCO_WDT
> To compile this driver as a module, choose M here: the
> module will be called iTCO_wdt.
>
> -config ITCO_VENDOR_SUPPORT
> - bool "Intel TCO Timer/Watchdog Specific Vendor Support"
> - depends on ITCO_WDT
> - help
> - Add vendor specific support to the intel TCO timer based watchdog
> - devices. At this moment we only have additional support for some
> - SuperMicro Inc. motherboards.
> -
> config IT8712F_WDT
> tristate "IT8712F (Smart Guardian) Watchdog Timer"
> depends on X86
> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> index 1bd2d6f37c53..b05a7e611308 100644
> --- a/drivers/watchdog/Makefile
> +++ b/drivers/watchdog/Makefile
> @@ -113,9 +113,6 @@ obj-$(CONFIG_WAFER_WDT) += wafer5823wdt.o
> obj-$(CONFIG_I6300ESB_WDT) += i6300esb.o
> obj-$(CONFIG_IE6XX_WDT) += ie6xx_wdt.o
> obj-$(CONFIG_ITCO_WDT) += iTCO_wdt.o
> -ifeq ($(CONFIG_ITCO_VENDOR_SUPPORT),y)
> -obj-$(CONFIG_ITCO_WDT) += iTCO_vendor_support.o
> -endif
> obj-$(CONFIG_IT8712F_WDT) += it8712f_wdt.o
> obj-$(CONFIG_IT87_WDT) += it87_wdt.o
> obj-$(CONFIG_HP_WATCHDOG) += hpwdt.o
> diff --git a/drivers/watchdog/iTCO_vendor.h b/drivers/watchdog/iTCO_vendor.h
> deleted file mode 100644
> index 69e92e692ae0..000000000000
> --- a/drivers/watchdog/iTCO_vendor.h
> +++ /dev/null
> @@ -1,14 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0 */
> -/* iTCO Vendor Specific Support hooks */
> -#ifdef CONFIG_ITCO_VENDOR_SUPPORT
> -extern int iTCO_vendorsupport;
> -extern void iTCO_vendor_pre_start(struct resource *, unsigned int);
> -extern void iTCO_vendor_pre_stop(struct resource *);
> -extern int iTCO_vendor_check_noreboot_on(void);
> -#else
> -#define iTCO_vendorsupport 0
> -#define iTCO_vendor_pre_start(acpibase, heartbeat) {}
> -#define iTCO_vendor_pre_stop(acpibase) {}
> -#define iTCO_vendor_check_noreboot_on() 1
> - /* 1=check noreboot; 0=don't check */
> -#endif
> diff --git a/drivers/watchdog/iTCO_vendor_support.c b/drivers/watchdog/iTCO_vendor_support.c
> deleted file mode 100644
> index cf0eaa04b064..000000000000
> --- a/drivers/watchdog/iTCO_vendor_support.c
> +++ /dev/null
> @@ -1,216 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0+
> -/*
> - * intel TCO vendor specific watchdog driver support
> - *
> - * (c) Copyright 2006-2009 Wim Van Sebroeck <wim@iguana.be>.
> - *
> - * Neither Wim Van Sebroeck nor Iguana vzw. admit liability nor
> - * provide warranty for any of this software. This material is
> - * provided "AS-IS" and at no charge.
> - */
> -
> -/*
> - * Includes, defines, variables, module parameters, ...
> - */
> -
> -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> -
> -/* Module and version information */
> -#define DRV_NAME "iTCO_vendor_support"
> -#define DRV_VERSION "1.04"
> -
> -/* Includes */
> -#include <linux/module.h> /* For module specific items */
> -#include <linux/moduleparam.h> /* For new moduleparam's */
> -#include <linux/types.h> /* For standard types (like size_t) */
> -#include <linux/errno.h> /* For the -ENODEV/... values */
> -#include <linux/kernel.h> /* For printk/panic/... */
> -#include <linux/init.h> /* For __init/__exit/... */
> -#include <linux/ioport.h> /* For io-port access */
> -#include <linux/io.h> /* For inb/outb/... */
> -
> -#include "iTCO_vendor.h"
> -
> -/* List of vendor support modes */
> -/* SuperMicro Pentium 3 Era 370SSE+-OEM1/P3TSSE */
> -#define SUPERMICRO_OLD_BOARD 1
> -/* SuperMicro Pentium 4 / Xeon 4 / EMT64T Era Systems - no longer supported */
> -#define SUPERMICRO_NEW_BOARD 2
> -/* Broken BIOS */
> -#define BROKEN_BIOS 911
> -
> -int iTCO_vendorsupport;
> -EXPORT_SYMBOL(iTCO_vendorsupport);
> -
> -module_param_named(vendorsupport, iTCO_vendorsupport, int, 0);
> -MODULE_PARM_DESC(vendorsupport, "iTCO vendor specific support mode, default="
> - "0 (none), 1=SuperMicro Pent3, 911=Broken SMI BIOS");
> -
> -/*
> - * Vendor Specific Support
> - */
> -
> -/*
> - * Vendor Support: 1
> - * Board: Super Micro Computer Inc. 370SSE+-OEM1/P3TSSE
> - * iTCO chipset: ICH2
> - *
> - * Code contributed by: R. Seretny <lkpatches@paypc.com>
> - * Documentation obtained by R. Seretny from SuperMicro Technical Support
> - *
> - * To enable Watchdog function:
> - * BIOS setup -> Power -> TCO Logic SMI Enable -> Within5Minutes
> - * This setting enables SMI to clear the watchdog expired flag.
> - * If BIOS or CPU fail which may cause SMI hang, then system will
> - * reboot. When application starts to use watchdog function,
> - * application has to take over the control from SMI.
> - *
> - * For P3TSSE, J36 jumper needs to be removed to enable the Watchdog
> - * function.
> - *
> - * Note: The system will reboot when Expire Flag is set TWICE.
> - * So, if the watchdog timer is 20 seconds, then the maximum hang
> - * time is about 40 seconds, and the minimum hang time is about
> - * 20.6 seconds.
> - */
> -
> -static void supermicro_old_pre_start(struct resource *smires)
> -{
> - unsigned long val32;
> -
> - /* Bit 13: TCO_EN -> 0 = Disables TCO logic generating an SMI# */
> - val32 = inl(smires->start);
> - val32 &= 0xffffdfff; /* Turn off SMI clearing watchdog */
> - outl(val32, smires->start); /* Needed to activate watchdog */
> -}
> -
> -static void supermicro_old_pre_stop(struct resource *smires)
> -{
> - unsigned long val32;
> -
> - /* Bit 13: TCO_EN -> 1 = Enables the TCO logic to generate SMI# */
> - val32 = inl(smires->start);
> - val32 |= 0x00002000; /* Turn on SMI clearing watchdog */
> - outl(val32, smires->start); /* Needed to deactivate watchdog */
> -}
> -
> -/*
> - * Vendor Support: 911
> - * Board: Some Intel ICHx based motherboards
> - * iTCO chipset: ICH7+
> - *
> - * Some Intel motherboards have a broken BIOS implementation: i.e.
> - * the SMI handler clear's the TIMEOUT bit in the TC01_STS register
> - * and does not reload the time. Thus the TCO watchdog does not reboot
> - * the system.
> - *
> - * These are the conclusions of Andriy Gapon <avg@icyb.net.ua> after
> - * debugging: the SMI handler is quite simple - it tests value in
> - * TCO1_CNT against 0x800, i.e. checks TCO_TMR_HLT. If the bit is set
> - * the handler goes into an infinite loop, apparently to allow the
> - * second timeout and reboot. Otherwise it simply clears TIMEOUT bit
> - * in TCO1_STS and that's it.
> - * So the logic seems to be reversed, because it is hard to see how
> - * TIMEOUT can get set to 1 and SMI generated when TCO_TMR_HLT is set
> - * (other than a transitional effect).
> - *
> - * The only fix found to get the motherboard(s) to reboot is to put
> - * the glb_smi_en bit to 0. This is a dirty hack that bypasses the
> - * broken code by disabling Global SMI.
> - *
> - * WARNING: globally disabling SMI could possibly lead to dramatic
> - * problems, especially on laptops! I.e. various ACPI things where
> - * SMI is used for communication between OS and firmware.
> - *
> - * Don't use this fix if you don't need to!!!
> - */
> -
> -static void broken_bios_start(struct resource *smires)
> -{
> - unsigned long val32;
> -
> - val32 = inl(smires->start);
> - /* Bit 13: TCO_EN -> 0 = Disables TCO logic generating an SMI#
> - Bit 0: GBL_SMI_EN -> 0 = No SMI# will be generated by ICH. */
> - val32 &= 0xffffdffe;
> - outl(val32, smires->start);
> -}
> -
> -static void broken_bios_stop(struct resource *smires)
> -{
> - unsigned long val32;
> -
> - val32 = inl(smires->start);
> - /* Bit 13: TCO_EN -> 1 = Enables TCO logic generating an SMI#
> - Bit 0: GBL_SMI_EN -> 1 = Turn global SMI on again. */
> - val32 |= 0x00002001;
> - outl(val32, smires->start);
> -}
> -
> -/*
> - * Generic Support Functions
> - */
> -
> -void iTCO_vendor_pre_start(struct resource *smires,
> - unsigned int heartbeat)
> -{
> - switch (iTCO_vendorsupport) {
> - case SUPERMICRO_OLD_BOARD:
> - supermicro_old_pre_start(smires);
> - break;
> - case BROKEN_BIOS:
> - broken_bios_start(smires);
> - break;
> - }
> -}
> -EXPORT_SYMBOL(iTCO_vendor_pre_start);
> -
> -void iTCO_vendor_pre_stop(struct resource *smires)
> -{
> - switch (iTCO_vendorsupport) {
> - case SUPERMICRO_OLD_BOARD:
> - supermicro_old_pre_stop(smires);
> - break;
> - case BROKEN_BIOS:
> - broken_bios_stop(smires);
> - break;
> - }
> -}
> -EXPORT_SYMBOL(iTCO_vendor_pre_stop);
> -
> -int iTCO_vendor_check_noreboot_on(void)
> -{
> - switch (iTCO_vendorsupport) {
> - case SUPERMICRO_OLD_BOARD:
> - return 0;
> - default:
> - return 1;
> - }
> -}
> -EXPORT_SYMBOL(iTCO_vendor_check_noreboot_on);
> -
> -static int __init iTCO_vendor_init_module(void)
> -{
> - if (iTCO_vendorsupport == SUPERMICRO_NEW_BOARD) {
> - pr_warn("Option vendorsupport=%d is no longer supported, "
> - "please use the w83627hf_wdt driver instead\n",
> - SUPERMICRO_NEW_BOARD);
> - return -EINVAL;
> - }
> - pr_info("vendor-support=%d\n", iTCO_vendorsupport);
> - return 0;
> -}
> -
> -static void __exit iTCO_vendor_exit_module(void)
> -{
> - pr_info("Module Unloaded\n");
> -}
> -
> -module_init(iTCO_vendor_init_module);
> -module_exit(iTCO_vendor_exit_module);
> -
> -MODULE_AUTHOR("Wim Van Sebroeck <wim@iguana.be>, "
> - "R. Seretny <lkpatches@paypc.com>");
> -MODULE_DESCRIPTION("Intel TCO Vendor Specific WatchDog Timer Driver Support");
> -MODULE_VERSION(DRV_VERSION);
> -MODULE_LICENSE("GPL");
> diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c
> index ced2fc0deb8c..fc0ed665f7db 100644
> --- a/drivers/watchdog/iTCO_wdt.c
> +++ b/drivers/watchdog/iTCO_wdt.c
> @@ -64,8 +64,6 @@
> #include <linux/platform_data/itco_wdt.h>
> #include <linux/mfd/intel_pmc_bxt.h>
>
> -#include "iTCO_vendor.h"
> -
> /* Address definitions for the TCO */
> /* TCO base address */
> #define TCOBASE(p) ((p)->tco_res->start)
> @@ -272,8 +270,6 @@ static int iTCO_wdt_start(struct watchdog_device *wd_dev)
>
> spin_lock(&p->io_lock);
>
> - iTCO_vendor_pre_start(p->smi_res, wd_dev->timeout);
> -
> /* disable chipset's NO_REBOOT bit */
> if (p->update_no_reboot_bit(p->no_reboot_priv, false)) {
> spin_unlock(&p->io_lock);
> @@ -307,8 +303,6 @@ static int iTCO_wdt_stop(struct watchdog_device *wd_dev)
>
> spin_lock(&p->io_lock);
>
> - iTCO_vendor_pre_stop(p->smi_res);
> -
> /* Bit 11: TCO Timer Halt -> 1 = The TCO timer is disabled */
> val = inw(TCO1_CNT(p));
> val |= 0x0800;
> @@ -483,10 +477,6 @@ static int iTCO_wdt_probe(struct platform_device *pdev)
> (u64)SMI_EN(p));
> return -EBUSY;
> }
> - } else if (iTCO_vendorsupport ||
> - turn_SMI_watchdog_clear_off >= p->iTCO_version) {
> - dev_err(dev, "SMI I/O resource is missing\n");
> - return -ENODEV;
> }
>
> iTCO_wdt_no_reboot_bit_setup(p, pdev, pdata);
> @@ -505,13 +495,6 @@ static int iTCO_wdt_probe(struct platform_device *pdev)
> return PTR_ERR(p->gcs_pmc);
> }
>
> - /* Check chipset's NO_REBOOT bit */
> - if (p->update_no_reboot_bit(p->no_reboot_priv, false) &&
> - iTCO_vendor_check_noreboot_on()) {
> - dev_info(dev, "unable to reset NO_REBOOT flag, device disabled by hardware/BIOS\n");
> - return -ENODEV; /* Cannot reset NO_REBOOT bit */
> - }
> -
> /* Set the NO_REBOOT bit to prevent later reboots, just for sure */
> p->update_no_reboot_bit(p->no_reboot_priv, true);
>
>

\
 
 \ /
  Last update: 2021-10-26 18:39    [W:0.389 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site