lkml.org 
[lkml]   [2021]   [Oct]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [RESEND v2 4/5] PCI: imx6: Fix the clock reference handling unbalance when link never came up
Date
> -----Original Message-----
> From: Bjorn Helgaas <helgaas@kernel.org>
> Sent: Wednesday, October 27, 2021 12:39 AM
> To: Richard Zhu <hongxing.zhu@nxp.com>
> Cc: l.stach@pengutronix.de; bhelgaas@google.com;
> lorenzo.pieralisi@arm.com; linux-pci@vger.kernel.org; dl-linux-imx
> <linux-imx@nxp.com>; linux-arm-kernel@lists.infradead.org;
> linux-kernel@vger.kernel.org; kernel@pengutronix.de
> Subject: Re: [RESEND v2 4/5] PCI: imx6: Fix the clock reference handling
> unbalance when link never came up
>
> On Fri, Oct 22, 2021 at 08:02:17AM +0000, Richard Zhu wrote:
> > <snipped ...>
> > > >
> > > > > > -static void imx6_pcie_clk_disable(struct imx6_pcie *imx6_pcie) -{
> > > > > > - clk_disable_unprepare(imx6_pcie->pcie);
> > > > > > - clk_disable_unprepare(imx6_pcie->pcie_phy);
> > > > > > - clk_disable_unprepare(imx6_pcie->pcie_bus);
> > > > > > -
> > > > > > - switch (imx6_pcie->drvdata->variant) {
> > > > > > - case IMX6SX:
> > > > > > - clk_disable_unprepare(imx6_pcie->pcie_inbound_axi);
> > > > > > - break;
> > > > > > - case IMX7D:
> > > > > > - regmap_update_bits(imx6_pcie->iomuxc_gpr,
> > > IOMUXC_GPR12,
> > > > > > - IMX7D_GPR12_PCIE_PHY_REFCLK_SEL,
> > > > > > - IMX7D_GPR12_PCIE_PHY_REFCLK_SEL);
> > > > > > - break;
> > > > > > - case IMX8MQ:
> > > > > > - clk_disable_unprepare(imx6_pcie->pcie_aux);
> > > > > > - break;
> > > > > > - default:
> > > > > > - break;
> > > >
> > > > While you're at it, this "default: break;" thing is pointless.
> > > > Normally it's better to just *move* something without changing it
> > > > at all, but this is such a simple thing I think you could drop
> > > > this at the same time as the move.
> > > >
> > > [Richard Zhu] Okay, got that. Would remove the "default:break" later.
> Thanks.
> > [Richard Zhu] I figure out that the default:break is required by
> > IMX6Q/IMX6QP. So I just don't drop them in v3 patch-set.
>
> That makes no sense. The code is:
>
> +static void imx6_pcie_clk_disable(struct imx6_pcie *imx6_pcie)
> +{
> + clk_disable_unprepare(imx6_pcie->pcie);
> + clk_disable_unprepare(imx6_pcie->pcie_phy);
> + clk_disable_unprepare(imx6_pcie->pcie_bus);
> +
> + switch (imx6_pcie->drvdata->variant) {
> + case IMX6SX:
> + clk_disable_unprepare(imx6_pcie->pcie_inbound_axi);
> + break;
> + case IMX7D:
> + regmap_update_bits(imx6_pcie->iomuxc_gpr,
> IOMUXC_GPR12,
> +
> IMX7D_GPR12_PCIE_PHY_REFCLK_SEL,
> +
> IMX7D_GPR12_PCIE_PHY_REFCLK_SEL);
> + break;
> + case IMX8MQ:
> + clk_disable_unprepare(imx6_pcie->pcie_aux);
> + break;
> + default:
> + break;
> + }
> +}
>
> Why do you think it makes a difference to remove the
> "default: break;"? There is no executable code after it.
> I don't see how IMX6Q/IMX6QP could depend on the default case.
>
> BTW, I feel like a broken record, but your v3 posting still has inconsistent
> subject line capitalization:
>
> PCI: imx6: move the clock disable function to a proper place
> PCI: dwc: add a new callback host exit function into host ops
>
> It would be nice if they were consistent and contained more specific
> information, e.g.,
>
> PCI: imx6: Move imx6_pcie_clk_disable() earlier
> PCI: dwc: Add dw_pcie_host_ops.host_exit() callback
[Richard Zhu] Got that, would change to be consistent and more specific information. Thanks a lot.

BR
Richard
>
> Bjorn

\
 
 \ /
  Last update: 2021-10-27 03:30    [W:0.109 / U:0.844 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site