lkml.org 
[lkml]   [2021]   [Oct]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3 1/2] drm/bridge: parade-ps8640: Enable runtime power management
Quoting Philip Chen (2021-10-26 12:11:09)
> Fit ps8640 driver into runtime power management framework:
>
> First, break _poweron() to 3 parts: (1) turn on power and wait for
> ps8640's internal MCU to finish init (2) check panel HPD (which is
> proxied by GPIO9) (3) the other configs. As runtime_resume() can be
> called before panel is powered, we only add (1) to _resume() and leave
> (2)(3) to _pre_enable(). We also add (2) to _aux_transfer() as we want
> to ensure panel HPD is asserted before we start AUX CH transactions.
>
> Second, the original driver has a mysterious delay of 50 ms between (2)
> and (3). Since Parade's support can't explain what the delay is for,
> and we don't see removing the delay break any boards at hand, remove
> the delay to fit into this driver change.
>
> In addition, rename "powered" to "pre_enabled" and don't check for it
> in the pm_runtime calls. The pm_runtime calls are already refcounted
> so there's no reason to check there. The other user of "powered",
> _get_edid(), only cares if pre_enable() has already been called.
>
> Lastly, change some existing DRM_...() logging to dev_...() along the
> way, since DRM_...() seem to be deprecated in [1].
>
> [1] https://patchwork.freedesktop.org/patch/454760/
>
> Signed-off-by: Philip Chen <philipchen@chromium.org>
> Reviewed-by: Douglas Anderson <dianders@chromium.org>
> ---
>
> Changes in v3:
> - Fix typo/wording in the commit message.
> - Add ps8640_aux_transfer_msg() for AUX operation. In
> ps8640_aux_transfer(), wrap around ps8640_aux_transfer_msg()
> with PM operations and HPD check.
> - Document why autosuspend_delay is set to 500ms.
>
> drivers/gpu/drm/bridge/parade-ps8640.c | 186 +++++++++++++++----------
> 1 file changed, 115 insertions(+), 71 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/parade-ps8640.c b/drivers/gpu/drm/bridge/parade-ps8640.c
> index 3aaa90913bf8..ac42a3473770 100644
> --- a/drivers/gpu/drm/bridge/parade-ps8640.c
> +++ b/drivers/gpu/drm/bridge/parade-ps8640.c
> @@ -9,6 +9,7 @@
> #include <linux/i2c.h>
> #include <linux/module.h>
> #include <linux/of_graph.h>
> +#include <linux/pm_runtime.h>
> #include <linux/regmap.h>
> #include <linux/regulator/consumer.h>
>
> @@ -100,7 +101,7 @@ struct ps8640 {
> struct regulator_bulk_data supplies[2];
> struct gpio_desc *gpio_reset;
> struct gpio_desc *gpio_powerdown;
> - bool powered;
> + bool pre_enabled;
> };
>
> static const struct regmap_config ps8640_regmap_config[] = {
> @@ -148,8 +149,29 @@ static inline struct ps8640 *aux_to_ps8640(struct drm_dp_aux *aux)
> return container_of(aux, struct ps8640, aux);
> }
>
> -static ssize_t ps8640_aux_transfer(struct drm_dp_aux *aux,
> - struct drm_dp_aux_msg *msg)
> +static void ps8640_ensure_hpd(struct ps8640 *ps_bridge)

static int ps8640_ensure_hpd?

> +{
> + struct regmap *map = ps_bridge->regmap[PAGE2_TOP_CNTL];
> + struct device *dev = &ps_bridge->page[PAGE2_TOP_CNTL]->dev;
> + int status;
> + int ret;
> +
> + /*
> + * Apparently something about the firmware in the chip signals that
> + * HPD goes high by reporting GPIO9 as high (even though HPD isn't
> + * actually connected to GPIO9).
> + */
> + ret = regmap_read_poll_timeout(map, PAGE2_GPIO_H, status,
> + status & PS_GPIO9, 20 * 1000, 200 * 1000);
> +
> + if (ret < 0)
> + dev_warn(dev, "HPD didn't go high: %d\n", ret);
> +
> + return ret;
> +}
> +
> +static ssize_t ps8640_aux_transfer_msg(struct drm_dp_aux *aux,
> + struct drm_dp_aux_msg *msg)
> {
> struct ps8640 *ps_bridge = aux_to_ps8640(aux);
> struct regmap *map = ps_bridge->regmap[PAGE0_DP_CNTL];

Otherwise

Reviewed-by: Stephen Boyd <swboyd@chromium.org>

\
 
 \ /
  Last update: 2021-10-26 21:36    [W:0.048 / U:0.408 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site