lkml.org 
[lkml]   [2021]   [Oct]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] sound: 6fire: fix control and bulk message timeouts
Date
USB control and bulk message timeouts are specified in milliseconds and
should specifically not vary with CONFIG_HZ.

Fixes: c6d43ba816d1 ("ALSA: usb/6fire - Driver for TerraTec DMX 6Fire USB")
Cc: stable@vger.kernel.org # 2.6.39
Signed-off-by: Johan Hovold <johan@kernel.org>
---
sound/usb/6fire/comm.c | 2 +-
sound/usb/6fire/firmware.c | 6 +++---
2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/sound/usb/6fire/comm.c b/sound/usb/6fire/comm.c
index 43a2a62d66f7..49629d4bb327 100644
--- a/sound/usb/6fire/comm.c
+++ b/sound/usb/6fire/comm.c
@@ -95,7 +95,7 @@ static int usb6fire_comm_send_buffer(u8 *buffer, struct usb_device *dev)
int actual_len;

ret = usb_interrupt_msg(dev, usb_sndintpipe(dev, COMM_EP),
- buffer, buffer[1] + 2, &actual_len, HZ);
+ buffer, buffer[1] + 2, &actual_len, 1000);
if (ret < 0)
return ret;
else if (actual_len != buffer[1] + 2)
diff --git a/sound/usb/6fire/firmware.c b/sound/usb/6fire/firmware.c
index 8981e61f2da4..c51abc54d2f8 100644
--- a/sound/usb/6fire/firmware.c
+++ b/sound/usb/6fire/firmware.c
@@ -160,7 +160,7 @@ static int usb6fire_fw_ezusb_write(struct usb_device *device,
{
return usb_control_msg_send(device, 0, type,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- value, 0, data, len, HZ, GFP_KERNEL);
+ value, 0, data, len, 1000, GFP_KERNEL);
}

static int usb6fire_fw_ezusb_read(struct usb_device *device,
@@ -168,7 +168,7 @@ static int usb6fire_fw_ezusb_read(struct usb_device *device,
{
return usb_control_msg_recv(device, 0, type,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- value, 0, data, len, HZ, GFP_KERNEL);
+ value, 0, data, len, 1000, GFP_KERNEL);
}

static int usb6fire_fw_fpga_write(struct usb_device *device,
@@ -178,7 +178,7 @@ static int usb6fire_fw_fpga_write(struct usb_device *device,
int ret;

ret = usb_bulk_msg(device, usb_sndbulkpipe(device, FPGA_EP), data, len,
- &actual_len, HZ);
+ &actual_len, 1000);
if (ret < 0)
return ret;
else if (actual_len != len)
--
2.32.0
\
 
 \ /
  Last update: 2021-10-25 14:12    [W:0.192 / U:0.360 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site