lkml.org 
[lkml]   [2021]   [Oct]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2] media: aspeed: add debugfs
From
Dear Greg,

Yes, you are right. I will update accordingly.


On 2021/10/25 下午 03:59, Greg KH wrote:
> On Wed, Sep 29, 2021 at 05:00:25PM +0800, Jammy Huang wrote:
>> To show video real-time information as below:
>>
>> Caputre:
>> Signal : Unlock
>> Width : 1920
>> Height : 1080
>> FRC : 30
>>
>> Performance:
>> Frame# : 0
>> Frame Duration :
>> Now : 0
>> Min : 0
>> Max : 0
>> FPS(ms) : 0
>>
>> Change-Id: I483740c4df6db07a9261c18440472a0356512bb7
>> Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
>> ---
>> drivers/media/platform/aspeed-video.c | 101 ++++++++++++++++++++++++++
>> 1 file changed, 101 insertions(+)
>>
>> diff --git a/drivers/media/platform/aspeed-video.c b/drivers/media/platform/aspeed-video.c
>> index 8b3939b8052d..c5c413844441 100644
>> --- a/drivers/media/platform/aspeed-video.c
>> +++ b/drivers/media/platform/aspeed-video.c
>> @@ -21,6 +21,8 @@
>> #include <linux/videodev2.h>
>> #include <linux/wait.h>
>> #include <linux/workqueue.h>
>> +#include <linux/debugfs.h>
>> +#include <linux/ktime.h>
>> #include <media/v4l2-ctrls.h>
>> #include <media/v4l2-dev.h>
>> #include <media/v4l2-device.h>
>> @@ -203,6 +205,14 @@ struct aspeed_video_buffer {
>> struct list_head link;
>> };
>>
>> +struct aspeed_video_perf {
>> + ktime_t last_sample;
>> + u32 totaltime;
>> + u32 duration;
>> + u32 duration_min;
>> + u32 duration_max;
>> +};
>> +
>> #define to_aspeed_video_buffer(x) \
>> container_of((x), struct aspeed_video_buffer, vb)
>>
>> @@ -241,6 +251,8 @@ struct aspeed_video {
>> unsigned int frame_left;
>> unsigned int frame_right;
>> unsigned int frame_top;
>> +
>> + struct aspeed_video_perf perf;
>> };
>>
>> #define to_aspeed_video(x) container_of((x), struct aspeed_video, v4l2_dev)
>> @@ -444,6 +456,16 @@ static void aspeed_video_write(struct aspeed_video *video, u32 reg, u32 val)
>> readl(video->base + reg));
>> }
>>
>> +static void update_perf(struct aspeed_video_perf *p)
>> +{
>> + p->duration =
>> + ktime_to_ms(ktime_sub(ktime_get(), p->last_sample));
>> + p->totaltime += p->duration;
>> +
>> + p->duration_max = max(p->duration, p->duration_max);
>> + p->duration_min = min(p->duration, p->duration_min);
>> +}
>> +
>> static int aspeed_video_start_frame(struct aspeed_video *video)
>> {
>> dma_addr_t addr;
>> @@ -482,6 +504,8 @@ static int aspeed_video_start_frame(struct aspeed_video *video)
>> aspeed_video_update(video, VE_INTERRUPT_CTRL, 0,
>> VE_INTERRUPT_COMP_COMPLETE);
>>
>> + video->perf.last_sample = ktime_get();
>> +
>> aspeed_video_update(video, VE_SEQ_CTRL, 0,
>> VE_SEQ_CTRL_TRIG_CAPTURE | VE_SEQ_CTRL_TRIG_COMP);
>>
>> @@ -600,6 +624,8 @@ static irqreturn_t aspeed_video_irq(int irq, void *arg)
>> u32 frame_size = aspeed_video_read(video,
>> VE_JPEG_COMP_SIZE_READ_BACK);
>>
>> + update_perf(&video->perf);
>> +
>> spin_lock(&video->lock);
>> clear_bit(VIDEO_FRAME_INPRG, &video->flags);
>> buf = list_first_entry_or_null(&video->buffers,
>> @@ -760,6 +786,7 @@ static void aspeed_video_get_resolution(struct aspeed_video *video)
>> det->width = MIN_WIDTH;
>> det->height = MIN_HEIGHT;
>> video->v4l2_input_status = V4L2_IN_ST_NO_SIGNAL;
>> + memset(&video->perf, 0, sizeof(video->perf));
>>
>> do {
>> if (tries) {
>> @@ -1450,6 +1477,8 @@ static int aspeed_video_start_streaming(struct vb2_queue *q,
>> struct aspeed_video *video = vb2_get_drv_priv(q);
>>
>> video->sequence = 0;
>> + video->perf.duration_max = 0;
>> + video->perf.duration_min = 0xffffffff;
>>
>> rc = aspeed_video_start_frame(video);
>> if (rc) {
>> @@ -1517,6 +1546,72 @@ static const struct vb2_ops aspeed_video_vb2_ops = {
>> .buf_queue = aspeed_video_buf_queue,
>> };
>>
>> +#ifdef CONFIG_DEBUG_FS
>> +static int aspeed_video_debugfs_show(struct seq_file *s, void *data)
>> +{
>> + struct aspeed_video *v = s->private;
>> +
>> + seq_puts(s, "\n");
>> +
>> + seq_printf(s, " %-20s:\t%s\n", "Signal",
>> + v->v4l2_input_status ? "Unlock" : "Lock");
>> + seq_printf(s, " %-20s:\t%d\n", "Width", v->pix_fmt.width);
>> + seq_printf(s, " %-20s:\t%d\n", "Height", v->pix_fmt.height);
>> + seq_printf(s, " %-20s:\t%d\n", "FRC", v->frame_rate);
>> +
>> + seq_puts(s, "\n");
>> +
>> + seq_puts(s, "Performance:\n");
>> + seq_printf(s, " %-20s:\t%d\n", "Frame#", v->sequence);
>> + seq_printf(s, " %-20s:\n", "Frame Duration");
>> + seq_printf(s, " %-18s:\t%d\n", "Now", v->perf.duration);
>> + seq_printf(s, " %-18s:\t%d\n", "Min", v->perf.duration_min);
>> + seq_printf(s, " %-18s:\t%d\n", "Max", v->perf.duration_max);
>> + seq_printf(s, " %-20s:\t%d\n", "FPS(ms)", 1000/(v->perf.totaltime/v->sequence));
>> +
>> +
>> + return 0;
>> +}
>> +
>> +int aspeed_video_proc_open(struct inode *inode, struct file *file)
>> +{
>> + return single_open(file, aspeed_video_debugfs_show, inode->i_private);
>> +}
>> +
>> +static struct file_operations aspeed_video_debugfs_ops = {
>> + .owner = THIS_MODULE,
>> + .open = aspeed_video_proc_open,
>> + .read = seq_read,
>> + .llseek = seq_lseek,
>> + .release = single_release,
>> +};
>> +
>> +static struct dentry *debugfs_entry;
>> +
>> +static void aspeed_video_debugfs_remove(struct aspeed_video *video)
>> +{
>> + debugfs_remove_recursive(debugfs_entry);
>> + debugfs_entry = NULL;
>> +}
>> +
>> +static int aspeed_video_debugfs_create(struct aspeed_video *video)
>> +{
>> + debugfs_entry = debugfs_create_file(DEVICE_NAME, 0444, NULL,
>> + video,
>> + &aspeed_video_debugfs_ops);
>> + if (!debugfs_entry)
>> + aspeed_video_debugfs_remove(video);
> This check will never happen, why are you making it?
>
> There's no need to care if debugfs works or not, just create the file
> and move on. This function should not return anything.
>
>> +
>> + return debugfs_entry == NULL ? -EIO : 0;
>> +}
>> +#else
>> +static void aspeed_video_debugfs_remove(struct aspeed_video *video) { }
>> +static int aspeed_video_debugfs_create(struct aspeed_video *video)
>> +{
>> + return 0;
>> +}
>> +#endif /* CONFIG_DEBUG_FS */
>> +
>> static int aspeed_video_setup_video(struct aspeed_video *video)
>> {
>> const u64 mask = ~(BIT(V4L2_JPEG_CHROMA_SUBSAMPLING_444) |
>> @@ -1708,6 +1803,10 @@ static int aspeed_video_probe(struct platform_device *pdev)
>> return rc;
>> }
>>
>> + rc = aspeed_video_debugfs_create(video);
>> + if (rc)
>> + dev_err(video->dev, "debugfs create failed\n");
> As proof of this, you don't care if this doesn't work, you just print
> out a message that was already printed out :(
>
> thanks,
>
> greg k-h

--
--
Best Regards
Jammy

\
 
 \ /
  Last update: 2021-10-25 12:07    [W:0.476 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site