lkml.org 
[lkml]   [2021]   [Oct]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5 4/6] PCI: brcmstb: Add control of subdevice voltage regulators
On Fri, Oct 22, 2021 at 03:15:59PM -0400, Jim Quinlan wrote:
> On Fri, Oct 22, 2021 at 10:31 AM Mark Brown <broonie@kernel.org> wrote:
> >
> > On Fri, Oct 22, 2021 at 10:06:57AM -0400, Jim Quinlan wrote:
> >
> > > +static const char * const supplies[] = {
> > > + "vpcie3v3-supply",
> > > + "vpcie3v3aux-supply",
> > > + "brcm-ep-a-supply",
> > > + "brcm-ep-b-supply",
> > > +};
> >
> > Why are you including "-supply" in the names here? That will lead to
> > a double -supply when we look in the DT which probably isn't what you're
> > looking for.
> I'm not sure how this got past testing; will fix.
>
> >
> > Also are you *sure* that the device has supplies with names like
> > "brcm-ep-a"? That seems rather unidiomatic for electrical engineering,
> > the names here are supposed to correspond to the names used in the
> > datasheet for the part.
> I try to explain this in the commit message of"PCI: allow for callback
> to prepare nascent subdev". Wrt to the names,
>
> "These regulators typically govern the actual power supply to the
> endpoint chip. Sometimes they may be a the official PCIe socket
> power -- such as 3.3v or aux-3.3v. Sometimes they are truly
> the regulator(s) that supply power to the EP chip."
>
> Each different SOC./board we deal with may present different ways of
> making the EP device power on. We are using
> an abstraction name "brcm-ep-a" to represent some required regulator
> to make the EP work for a specific board. The RC
> driver cannot hard code a descriptive name as it must work for all
> boards designed by us, others, and third parties.
> The EP driver also doesn't know or care about the regulator name, and
> this driver is often closed source and often immutable. The EP
> device itself may come from Brcm, a third party, or sometimes a competitor.
>
> Basically, we find using a generic name such as "brcm-ep-a-supply"
> quite handy and many of our customers embrace this feature.
> I know that Rob was initially against such a generic name, but I
> vaguely remember him seeing some merit to this, perhaps a tiny bit :-)
> Or my memory is shot, which could very well be the case.

I don't recall being in favor of this. If you've got standard rails
(3.3V and 12V), then I'm fine with standard properties for them with or
without a slot.

Rob

\
 
 \ /
  Last update: 2021-10-26 00:17    [W:0.097 / U:0.828 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site