lkml.org 
[lkml]   [2021]   [Oct]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 1/4] firmware_loader: rename EXTRA_FIRMWARE and EXTRA_FIRMWARE_DIR
Date
Now that we've tied loose ends on the built-in firmware API,
rename the kconfig symbols for it to reflect more that they are
associated to the firmware_loader and to make it easier to
understand what they are for.

Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
---
.../driver-api/firmware/built-in-fw.rst | 6 ++--
Documentation/x86/microcode.rst | 8 ++---
arch/x86/Kconfig | 4 +--
drivers/base/firmware_loader/Kconfig | 31 ++++++++++++-------
drivers/base/firmware_loader/builtin/Makefile | 6 ++--
drivers/staging/media/av7110/Kconfig | 4 +--
6 files changed, 34 insertions(+), 25 deletions(-)

diff --git a/Documentation/driver-api/firmware/built-in-fw.rst b/Documentation/driver-api/firmware/built-in-fw.rst
index bc1c961bace1..a9a0ab8c9512 100644
--- a/Documentation/driver-api/firmware/built-in-fw.rst
+++ b/Documentation/driver-api/firmware/built-in-fw.rst
@@ -8,11 +8,11 @@ the filesystem. Instead, firmware can be looked for inside the kernel
directly. You can enable built-in firmware using the kernel configuration
options:

- * CONFIG_EXTRA_FIRMWARE
- * CONFIG_EXTRA_FIRMWARE_DIR
+ * CONFIG_FW_LOADER_BUILTIN_FILES
+ * CONFIG_FW_LOADER_BUILTIN_DIR

There are a few reasons why you might want to consider building your firmware
-into the kernel with CONFIG_EXTRA_FIRMWARE:
+into the kernel with CONFIG_FW_LOADER_BUILTIN_FILES:

* Speed
* Firmware is needed for accessing the boot device, and the user doesn't
diff --git a/Documentation/x86/microcode.rst b/Documentation/x86/microcode.rst
index a320d37982ed..6a5e36bd16bb 100644
--- a/Documentation/x86/microcode.rst
+++ b/Documentation/x86/microcode.rst
@@ -114,13 +114,13 @@ Builtin microcode
=================

The loader supports also loading of a builtin microcode supplied through
-the regular builtin firmware method CONFIG_EXTRA_FIRMWARE. Only 64-bit is
-currently supported.
+the regular builtin firmware method using CONFIG_FW_LOADER_BUILTIN_FILES.
+Only 64-bit is currently supported.

Here's an example::

- CONFIG_EXTRA_FIRMWARE="intel-ucode/06-3a-09 amd-ucode/microcode_amd_fam15h.bin"
- CONFIG_EXTRA_FIRMWARE_DIR="/lib/firmware"
+ CONFIG_FW_LOADER_BUILTIN_FILES="intel-ucode/06-3a-09 amd-ucode/microcode_amd_fam15h.bin"
+ CONFIG_FW_LOADER_BUILTIN_DIR="/lib/firmware"

This basically means, you have the following tree structure locally::

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index d9830e7e1060..149e4c2a0379 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1305,8 +1305,8 @@ config MICROCODE
initrd for microcode blobs.

In addition, you can build the microcode into the kernel. For that you
- need to add the vendor-supplied microcode to the CONFIG_EXTRA_FIRMWARE
- config option.
+ need to add the vendor-supplied microcode to the configuration option
+ CONFIG_FW_LOADER_BUILTIN_FILES

config MICROCODE_INTEL
bool "Intel microcode loading support"
diff --git a/drivers/base/firmware_loader/Kconfig b/drivers/base/firmware_loader/Kconfig
index 5b24f3959255..d56f4c1c7db4 100644
--- a/drivers/base/firmware_loader/Kconfig
+++ b/drivers/base/firmware_loader/Kconfig
@@ -22,14 +22,14 @@ config FW_LOADER
You typically want this built-in (=y) but you can also enable this
as a module, in which case the firmware_class module will be built.
You also want to be sure to enable this built-in if you are going to
- enable built-in firmware (CONFIG_EXTRA_FIRMWARE).
+ enable built-in firmware (CONFIG_FW_LOADER_BUILTIN_FILES).

if FW_LOADER

config FW_LOADER_PAGED_BUF
bool

-config EXTRA_FIRMWARE
+config FW_LOADER_BUILTIN_FILES
string "Build named firmware blobs into the kernel binary"
help
Device drivers which require firmware can typically deal with
@@ -43,14 +43,21 @@ config EXTRA_FIRMWARE
in boot and cannot rely on the firmware being placed in an initrd or
initramfs.

- This option is a string and takes the (space-separated) names of the
+ Support for built-in firmware is not supported if you are using
+ the firmware loader as a module.
+
+ This option is a string and takes the space-separated names of the
firmware files -- the same names that appear in MODULE_FIRMWARE()
and request_firmware() in the source. These files should exist under
- the directory specified by the EXTRA_FIRMWARE_DIR option, which is
+ the directory specified by the FW_LOADER_BUILTIN_DIR option, which is
/lib/firmware by default.

- For example, you might set CONFIG_EXTRA_FIRMWARE="usb8388.bin", copy
- the usb8388.bin file into /lib/firmware, and build the kernel. Then
+ For example, you might have set:
+
+ CONFIG_FW_LOADER_BUILTIN_FILES="usb8388.bin"
+
+ After this you would copy the usb8388.bin file into directory
+ specified by FW_LOADER_BUILTIN_DIR and build the kernel. Then
any request_firmware("usb8388.bin") will be satisfied internally
inside the kernel without ever looking at your filesystem at runtime.

@@ -60,13 +67,15 @@ config EXTRA_FIRMWARE
image since it combines both GPL and non-GPL work. You should
consult a lawyer of your own before distributing such an image.

-config EXTRA_FIRMWARE_DIR
- string "Firmware blobs root directory"
- depends on EXTRA_FIRMWARE != ""
+config FW_LOADER_BUILTIN_DIR
+ string "Directory with firmware to be built-in to the kernel"
+ depends on FW_LOADER_BUILTIN_FILES != ""
default "/lib/firmware"
help
- This option controls the directory in which the kernel build system
- looks for the firmware files listed in the EXTRA_FIRMWARE option.
+ This option specifies the directory which the kernel build system
+ will use to look for the firmware files which are going to be
+ built into the kernel using the space-separated
+ FW_LOADER_BUILTIN_FILES entries.

config FW_LOADER_USER_HELPER
bool "Enable the firmware sysfs fallback mechanism"
diff --git a/drivers/base/firmware_loader/builtin/Makefile b/drivers/base/firmware_loader/builtin/Makefile
index eb4be452062a..7cdd0b5c7384 100644
--- a/drivers/base/firmware_loader/builtin/Makefile
+++ b/drivers/base/firmware_loader/builtin/Makefile
@@ -1,12 +1,12 @@
# SPDX-License-Identifier: GPL-2.0
obj-y += main.o

-# Create $(fwdir) from $(CONFIG_EXTRA_FIRMWARE_DIR) -- if it doesn't have a
+# Create $(fwdir) from $(CONFIG_FW_LOADER_BUILTIN_DIR) -- if it doesn't have a
# leading /, it's relative to $(srctree).
-fwdir := $(subst $(quote),,$(CONFIG_EXTRA_FIRMWARE_DIR))
+fwdir := $(subst $(quote),,$(CONFIG_FW_LOADER_BUILTIN_DIR))
fwdir := $(addprefix $(srctree)/,$(filter-out /%,$(fwdir)))$(filter /%,$(fwdir))

-firmware := $(addsuffix .gen.o, $(subst $(quote),,$(CONFIG_EXTRA_FIRMWARE)))
+firmware := $(addsuffix .gen.o, $(subst $(quote),,$(CONFIG_FW_LOADER_BUILTIN_FILES)))
obj-y += $(firmware)

FWNAME = $(patsubst $(obj)/%.gen.S,%,$@)
diff --git a/drivers/staging/media/av7110/Kconfig b/drivers/staging/media/av7110/Kconfig
index 9faf9d2d4001..87c7702f72f6 100644
--- a/drivers/staging/media/av7110/Kconfig
+++ b/drivers/staging/media/av7110/Kconfig
@@ -31,8 +31,8 @@ config DVB_AV7110
or /lib/firmware (depending on configuration of firmware hotplug).

Alternatively, you can download the file and use the kernel's
- EXTRA_FIRMWARE configuration option to build it into your
- kernel image by adding the filename to the EXTRA_FIRMWARE
+ FW_LOADER_BUILTIN_FILES configuration option to build it into your
+ kernel image by adding the filename to the FW_LOADER_BUILTIN_FILES
configuration option string.

Say Y if you own such a card and want to use it.
--
2.30.2
\
 
 \ /
  Last update: 2021-10-25 22:18    [W:0.079 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site