Messages in this thread Patch in this message | | | From | Greg Kroah-Hartman <> | Subject | [PATCH 5.10 54/95] net: dsa: mt7530: correct ds->num_ports | Date | Mon, 25 Oct 2021 21:14:51 +0200 |
| |
From: DENG Qingfang <dqfext@gmail.com>
commit 342afce10d6f61c443c95e244f812d4766f73f53 upstream.
Setting ds->num_ports to DSA_MAX_PORTS made DSA core allocate unnecessary dsa_port's and call mt7530_port_disable for non-existent ports.
Set it to MT7530_NUM_PORTS to fix that, and dsa_is_user_port check in port_enable/disable is no longer required.
Cc: stable@vger.kernel.org Signed-off-by: DENG Qingfang <dqfext@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- drivers/net/dsa/mt7530.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-)
--- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c @@ -981,9 +981,6 @@ mt7530_port_enable(struct dsa_switch *ds { struct mt7530_priv *priv = ds->priv; - if (!dsa_is_user_port(ds, port)) - return 0; - mutex_lock(&priv->reg_mutex); /* Allow the user port gets connected to the cpu port and also @@ -1006,9 +1003,6 @@ mt7530_port_disable(struct dsa_switch *d { struct mt7530_priv *priv = ds->priv; - if (!dsa_is_user_port(ds, port)) - return; - mutex_lock(&priv->reg_mutex); /* Clear up all port matrix which could be restored in the next @@ -2593,7 +2587,7 @@ mt7530_probe(struct mdio_device *mdiodev return -ENOMEM; priv->ds->dev = &mdiodev->dev; - priv->ds->num_ports = DSA_MAX_PORTS; + priv->ds->num_ports = MT7530_NUM_PORTS; /* Use medatek,mcm property to distinguish hardware type that would * casues a little bit differences on power-on sequence.
| |