lkml.org 
[lkml]   [2021]   [Oct]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v4 13/20] dma: qcom: bam_dma: Add support to initialize interconnect path
Hi Vladimir,

On Thu, 14 Oct 2021 at 00:46, Vladimir Zapolskiy
<vladimir.zapolskiy@linaro.org> wrote:
>
> Hi Bhupesh, Thara,
>
> On 10/13/21 1:55 PM, Bhupesh Sharma wrote:
> > From: Thara Gopinath <thara.gopinath@linaro.org>
> >
> > BAM dma engine associated with certain hardware blocks could require
> > relevant interconnect pieces be initialized prior to the dma engine
> > initialization. For e.g. crypto bam dma engine on sm8250. Such requirement
> > is passed on to the bam dma driver from dt via the "interconnects"
> > property. Add support in bam_dma driver to check whether the interconnect
> > path is accessible/enabled prior to attempting driver intializations.
> >
> > Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
> > Cc: Rob Herring <robh+dt@kernel.org>
> > Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
> > [Make header file inclusion alphabetical]
> > Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
> > ---
> > drivers/dma/qcom/bam_dma.c | 16 +++++++++++++++-
> > 1 file changed, 15 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/dma/qcom/bam_dma.c b/drivers/dma/qcom/bam_dma.c
> > index c8a77b428b52..fc84ef42507d 100644
> > --- a/drivers/dma/qcom/bam_dma.c
> > +++ b/drivers/dma/qcom/bam_dma.c
> > @@ -26,6 +26,7 @@
> > #include <linux/kernel.h>
> > #include <linux/io.h>
> > #include <linux/init.h>
> > +#include <linux/interconnect.h>
> > #include <linux/slab.h>
> > #include <linux/module.h>
> > #include <linux/interrupt.h>
> > @@ -392,6 +393,7 @@ struct bam_device {
> > const struct reg_offset_data *layout;
> >
> > struct clk *bamclk;
> > + struct icc_path *mem_path;
> > int irq;
> >
> > /* dma start transaction tasklet */
> > @@ -1284,9 +1286,18 @@ static int bam_dma_probe(struct platform_device *pdev)
> > return ret;
> > }
> >
> > + /* Ensure that interconnects are initialized */
> > + bdev->mem_path = of_icc_get(bdev->dev, "memory");
>
> I suppose devm_of_icc_get() usage could leave the error path and
> bam_dma_remove() intact.

Thanks, I will fix this in the v5.

Regards,
Bhupesh

> > +
> > + if (IS_ERR(bdev->mem_path)) {
> > + ret = PTR_ERR(bdev->mem_path);
> > + dev_err(bdev->dev, "failed to acquire icc path %d\n", ret);
> > + goto err_disable_clk;
> > + }
> > +
> > ret = bam_init(bdev);
> > if (ret)
> > - goto err_disable_clk;
> > + goto err_icc_path_put;
> >
> > tasklet_setup(&bdev->task, dma_tasklet);
> >
> > @@ -1371,6 +1382,8 @@ static int bam_dma_probe(struct platform_device *pdev)
> > tasklet_kill(&bdev->channels[i].vc.task);
> > err_tasklet_kill:
> > tasklet_kill(&bdev->task);
> > +err_icc_path_put:
> > + icc_put(bdev->mem_path);
> > err_disable_clk:
> > clk_disable_unprepare(bdev->bamclk);
> >
> > @@ -1406,6 +1419,7 @@ static int bam_dma_remove(struct platform_device *pdev)
> >
> > tasklet_kill(&bdev->task);
> >
> > + icc_put(bdev->mem_path);
> > clk_disable_unprepare(bdev->bamclk);
> >
> > return 0;
> >
>
> --
> Best wishes,
> Vladimir

\
 
 \ /
  Last update: 2021-10-24 15:54    [W:0.082 / U:0.592 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site