lkml.org 
[lkml]   [2021]   [Oct]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v5] Driver for ON Semi AR0521 camera sensor
Date
Hi Sakari,

> The drivers you're looking at are based on register lists so they usually
> support just a single frequency. The sensors are not limited to this
> frequency however, which is why you see the frequency in DT bindings, too.

Does that mean that drivers supporting a frequency range (rather than a
single frequency) don't need the range (nor single frequency) in DT?

While it's true that the AR0521 driver can (and has to) work with
different frequencies (on different systems), I think I can specify
a single frequency per system. But - should I really do that?
--
Krzysztof "Chris" Hałasa

Sieć Badawcza Łukasiewicz
Przemysłowy Instytut Automatyki i Pomiarów PIAP
Al. Jerozolimskie 202, 02-486 Warszawa

\
 
 \ /
  Last update: 2021-10-22 08:43    [W:0.119 / U:0.180 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site