lkml.org 
[lkml]   [2021]   [Oct]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 12/14] net: phy: add qca8081 soft_reset and enable master/slave seed
Date
qca8081 phy is a single port phy, configure
phy the lower seed value to make it linked as slave
mode easier.

Signed-off-by: Luo Jie <luoj@codeaurora.org>
---
drivers/net/phy/at803x.c | 48 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 48 insertions(+)

diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index 3096ed51dbae..f372f6ab78f6 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -215,6 +215,12 @@
#define QCA808X_PHY_MMD3_DEBUG_6 0xa011
#define QCA808X_MMD3_DEBUG_6_VALUE 0x5f85

+/* master/slave seed config */
+#define QCA808X_PHY_DEBUG_LOCAL_SEED 9
+#define QCA808X_MASTER_SLAVE_SEED_ENABLE BIT(1)
+#define QCA808X_MASTER_SLAVE_SEED_CFG GENMASK(12, 2)
+#define QCA808X_MASTER_SLAVE_SEED_RANGE 0x32
+
MODULE_DESCRIPTION("Qualcomm Atheros AR803x and QCA808X PHY driver");
MODULE_AUTHOR("Matus Ujhelyi");
MODULE_LICENSE("GPL");
@@ -1476,6 +1482,26 @@ static int qca808x_phy_fast_retrain_config(struct phy_device *phydev)
return 0;
}

+static int qca808x_phy_ms_random_seed_set(struct phy_device *phydev)
+{
+ u16 seed_value = (prandom_u32() % QCA808X_MASTER_SLAVE_SEED_RANGE);
+
+ return at803x_debug_reg_mask(phydev, QCA808X_PHY_DEBUG_LOCAL_SEED,
+ QCA808X_MASTER_SLAVE_SEED_CFG,
+ FIELD_PREP(QCA808X_MASTER_SLAVE_SEED_CFG, seed_value));
+}
+
+static int qca808x_phy_ms_seed_enable(struct phy_device *phydev, bool enable)
+{
+ u16 seed_enable = 0;
+
+ if (enable)
+ seed_enable = QCA808X_MASTER_SLAVE_SEED_ENABLE;
+
+ return at803x_debug_reg_mask(phydev, QCA808X_PHY_DEBUG_LOCAL_SEED,
+ QCA808X_MASTER_SLAVE_SEED_ENABLE, seed_enable);
+}
+
static int qca808x_config_init(struct phy_device *phydev)
{
int ret;
@@ -1497,6 +1523,16 @@ static int qca808x_config_init(struct phy_device *phydev)
if (ret)
return ret;

+ /* Configure lower ramdom seed to make phy linked as slave mode */
+ ret = qca808x_phy_ms_random_seed_set(phydev);
+ if (ret)
+ return ret;
+
+ /* Enable seed */
+ ret = qca808x_phy_ms_seed_enable(phydev, true);
+ if (ret)
+ return ret;
+
/* Configure adc threshold as 100mv for the link 10M */
return at803x_debug_reg_mask(phydev, QCA808X_PHY_DEBUG_ADC_THRESHOLD,
QCA808X_ADC_THRESHOLD_MASK, QCA808X_ADC_THRESHOLD_100MV);
@@ -1529,6 +1565,17 @@ static int qca808x_read_status(struct phy_device *phydev)
return 0;
}

+static int qca808x_soft_reset(struct phy_device *phydev)
+{
+ int ret;
+
+ ret = genphy_soft_reset(phydev);
+ if (ret < 0)
+ return ret;
+
+ return qca808x_phy_ms_seed_enable(phydev, true);
+}
+
static struct phy_driver at803x_driver[] = {
{
/* Qualcomm Atheros AR8035 */
@@ -1686,6 +1733,7 @@ static struct phy_driver at803x_driver[] = {
.resume = genphy_resume,
.read_status = qca808x_read_status,
.config_init = qca808x_config_init,
+ .soft_reset = qca808x_soft_reset,
}, };

module_phy_driver(at803x_driver);
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
\
 
 \ /
  Last update: 2021-10-22 14:08    [W:0.138 / U:0.140 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site