lkml.org 
[lkml]   [2021]   [Oct]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v1] cpufreq: CPPC: Fix performance/frequency conversion
Date
CPUfreq governors request CPU frequencies using information
on current CPU usage. The CPPC driver converts them to
performance requests. Frequency targets are computed as:
target_freq = (util / cpu_capacity) * max_freq
target_freq is then clamped between [policy->min, policy->max].

The CPPC driver converts performance values to frequencies
(and vice-versa) using cppc_cpufreq_perf_to_khz() and
cppc_cpufreq_khz_to_perf(). These functions both use two different
factors depending on the range of the input value. For
cppc_cpufreq_khz_to_perf():
- (NOMINAL_PERF / NOMINAL_FREQ) or
- (LOWEST_PERF / LOWEST_FREQ)
and for cppc_cpufreq_perf_to_khz():
- (NOMINAL_FREQ / NOMINAL_PERF) or
- ((NOMINAL_PERF - LOWEST_FREQ) / (NOMINAL_PERF - LOWEST_PERF))

This means the functions are not inverse for some values:
(perf_to_khz(khz_to_perf(x)) != x)

This patch makes use of one single conversion factor, being
(MAX_PERF / MAX_FREQ).

As LOWEST_FREQ is not used during conversion, the LOWEST_FREQ
advertised through policy->cpuinfo.min_freq might be different
from the LOWEST_FREQ value available in the CPPC object,
but the conversion will be correct.

Suggested-by: Lukasz Luba <lukasz.luba@arm.com>
Suggested-by: Morten Rasmussen <morten.rasmussen@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
---
drivers/cpufreq/cppc_cpufreq.c | 33 ++++++++++-----------------------
1 file changed, 10 insertions(+), 23 deletions(-)

diff --git a/drivers/cpufreq/cppc_cpufreq.c b/drivers/cpufreq/cppc_cpufreq.c
index d4c27022b9c9..d2ac74e7701e 100644
--- a/drivers/cpufreq/cppc_cpufreq.c
+++ b/drivers/cpufreq/cppc_cpufreq.c
@@ -302,13 +302,10 @@ static u64 cppc_get_dmi_max_khz(void)
}

/*
- * If CPPC lowest_freq and nominal_freq registers are exposed then we can
- * use them to convert perf to freq and vice versa
- *
- * If the perf/freq point lies between Nominal and Lowest, we can treat
- * (Low perf, Low freq) and (Nom Perf, Nom freq) as 2D co-ordinates of a line
- * and extrapolate the rest
- * For perf/freq > Nominal, we use the ratio perf:freq at Nominal for conversion
+ * The CPPC driver receives frequency requests and translates them to performance
+ * requests. Thus, frequency values are actually performance values on a frequency
+ * scale. The conversion is done as:
+ * target_freq = target_perf * (nominal_freq / nominal_perf)
*/
static unsigned int cppc_cpufreq_perf_to_khz(struct cppc_cpudata *cpu_data,
unsigned int perf)
@@ -317,14 +314,9 @@ static unsigned int cppc_cpufreq_perf_to_khz(struct cppc_cpudata *cpu_data,
static u64 max_khz;
u64 mul, div;

- if (caps->lowest_freq && caps->nominal_freq) {
- if (perf >= caps->nominal_perf) {
- mul = caps->nominal_freq;
- div = caps->nominal_perf;
- } else {
- mul = caps->nominal_freq - caps->lowest_freq;
- div = caps->nominal_perf - caps->lowest_perf;
- }
+ if (caps->nominal_freq) {
+ mul = caps->nominal_freq;
+ div = caps->nominal_perf;
} else {
if (!max_khz)
max_khz = cppc_get_dmi_max_khz();
@@ -341,14 +333,9 @@ static unsigned int cppc_cpufreq_khz_to_perf(struct cppc_cpudata *cpu_data,
static u64 max_khz;
u64 mul, div;

- if (caps->lowest_freq && caps->nominal_freq) {
- if (freq >= caps->nominal_freq) {
- mul = caps->nominal_perf;
- div = caps->nominal_freq;
- } else {
- mul = caps->lowest_perf;
- div = caps->lowest_freq;
- }
+ if (caps->nominal_freq) {
+ mul = caps->nominal_perf;
+ div = caps->nominal_freq;
} else {
if (!max_khz)
max_khz = cppc_get_dmi_max_khz();
--
2.17.1
\
 
 \ /
  Last update: 2021-10-22 09:52    [W:2.259 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site