lkml.org 
[lkml]   [2021]   [Oct]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] wcn36xx: add proper DMA memory barriers in rx path
Date
This is essentially exactly following the dma_wmb()/dma_rmb() usage
instructions in Documentation/memory-barriers.txt.

The theoretical races here are:

1. DXE (the DMA Transfer Engine in the Wi-Fi subsystem) seeing the
dxe->ctrl & WCN36xx_DXE_CTRL_VLD write before the dxe->dst_addr_l
write, thus performing DMA into the wrong address.

2. CPU reading dxe->dst_addr_l before DXE unsets dxe->ctrl &
WCN36xx_DXE_CTRL_VLD. This should generally be harmless since DXE
doesn't write dxe->dst_addr_l (no risk of freeing the wrong skb).

Fixes: 8e84c2582169 ("wcn36xx: mac80211 driver for Qualcomm WCN3660/WCN3680 hardware")
Signed-off-by: Benjamin Li <benl@squareup.com>
---
drivers/net/wireless/ath/wcn36xx/dxe.c | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/wcn36xx/dxe.c b/drivers/net/wireless/ath/wcn36xx/dxe.c
index 8e1dbfda6538..93994b2e8e03 100644
--- a/drivers/net/wireless/ath/wcn36xx/dxe.c
+++ b/drivers/net/wireless/ath/wcn36xx/dxe.c
@@ -613,6 +613,10 @@ static int wcn36xx_rx_handle_packets(struct wcn36xx *wcn,
dxe = ctl->desc;

while (!(READ_ONCE(dxe->ctrl) & WCN36xx_DXE_CTRL_VLD)) {
+ /* do not read until we own DMA descriptor */
+ dma_rmb();
+
+ /* read/modify DMA descriptor */
skb = ctl->skb;
dma_addr = dxe->dst_addr_l;
ret = wcn36xx_dxe_fill_skb(wcn->dev, ctl, GFP_ATOMIC);
@@ -623,9 +627,15 @@ static int wcn36xx_rx_handle_packets(struct wcn36xx *wcn,
dma_unmap_single(wcn->dev, dma_addr, WCN36XX_PKT_SIZE,
DMA_FROM_DEVICE);
wcn36xx_rx_skb(wcn, skb);
- } /* else keep old skb not submitted and use it for rx DMA */
+ }
+ /* else keep old skb not submitted and reuse it for rx DMA
+ * (dropping the packet that it contained)
+ */

+ /* flush descriptor changes before re-marking as valid */
+ dma_wmb();
dxe->ctrl = ctrl;
+
ctl = ctl->next;
dxe = ctl->desc;
}
--
2.25.1
\
 
 \ /
  Last update: 2021-10-23 02:16    [W:0.047 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site