lkml.org 
[lkml]   [2021]   [Oct]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 1/2] dt-bindings: phy: Introduce Qualcomm eDP/DP PHY binding
On Mon 18 Oct 12:48 PDT 2021, Rob Herring wrote:

> On Sat, Oct 16, 2021 at 04:21:27PM -0700, Bjorn Andersson wrote:
> > Introduce a binding for the eDP/DP PHY hardware block found in several
> > different Qualcomm platforms.
> >
> > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> > ---
> >
> > Changes since v2:
> > - None
> >
> > .../devicetree/bindings/phy/qcom,edp-phy.yaml | 69 +++++++++++++++++++
> > 1 file changed, 69 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml
> > new file mode 100644
> > index 000000000000..c258e4f7e332
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml
> > @@ -0,0 +1,69 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +
> > +%YAML 1.2
> > +---
> > +$id: "http://devicetree.org/schemas/phy/qcom,edp-phy.yaml#"
> > +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> > +
> > +title: Qualcomm DP/eDP PHY
> > +
> > +maintainers:
> > + - Bjorn Andersson <bjorn.andersson@linaro.org>
> > +
> > +description:
> > + The Qualcomm DP/eDP PHY is found in a number of Qualcomm platform and
> > + provides the physical interface for DisplayPort and Embedded Display Port.
> > +
> > +properties:
> > + compatible:
> > + enum:
> > + - qcom,sc8180x-dp-phy
> > + - qcom,sc8180x-edp-phy
>
> Is there a difference between DP and eDP?
>

It's the same hardware block, with the same inputs, but the two modes
requires different programming sequences. So I need some way to describe
which one this is.

> Perhaps note what that is if so.
>

What are you suggesting?

Regards,
Bjorn

> > +
> > + reg:
> > + items:
> > + - description: PHY base register block
> > + - description: tx0 register block
> > + - description: tx1 register block
> > + - description: PLL register block
> > +
> > + clocks:
> > + maxItems: 2
> > +
> > + clock-names:
> > + items:
> > + - const: aux
> > + - const: cfg_ahb
> > +
> > + "#clock-cells":
> > + const: 1
> > +
> > + "#phy-cells":
> > + const: 0
> > +
> > +required:
> > + - compatible
> > + - reg
> > + - clocks
> > + - clock-names
> > + - "#clock-cells"
> > + - "#phy-cells"
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > + - |
> > + phy@aec2a00 {
> > + compatible = "qcom,sc8180x-edp-phy";
> > + reg = <0x0aec2a00 0x1c0>,
> > + <0x0aec2200 0xa0>,
> > + <0x0aec2600 0xa0>,
> > + <0x0aec2000 0x19c>;
> > +
> > + clocks = <&dispcc 0>, <&dispcc 1>;
> > + clock-names = "aux", "cfg_ahb";
> > +
> > + #clock-cells = <1>;
> > + #phy-cells = <0>;
> > + };
> > +...
> > --
> > 2.29.2
> >
> >

\
 
 \ /
  Last update: 2021-10-21 16:50    [W:0.158 / U:0.124 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site