lkml.org 
[lkml]   [2021]   [Oct]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v15 05/13] PCI: kirin: Give more time for PERST# reset to finish
Date
Before code refactor, the PERST# signals were sent at the
end of the power_on logic. Then, the PCI core would probe for
the buses and add them.

The new logic changed it to send PERST# signals during
add_bus operation. That altered the timings.

Also, HiKey 970 require a little more waiting time for
the PCI bridge - which is outside the SoC - to finish
the PERST# reset, and then initialize the eye diagram.

So, increase the waiting time for the PERST# signals to
what's required for it to also work with HiKey 970.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---

To mailbombing on a large number of people, only mailing lists were C/C on the cover.
See [PATCH v15 00/13] at: https://lore.kernel.org/all/cover.1634812676.git.mchehab+huawei@kernel.org/

drivers/pci/controller/dwc/pcie-kirin.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pci/controller/dwc/pcie-kirin.c b/drivers/pci/controller/dwc/pcie-kirin.c
index de375795a3b8..bc329673632a 100644
--- a/drivers/pci/controller/dwc/pcie-kirin.c
+++ b/drivers/pci/controller/dwc/pcie-kirin.c
@@ -113,7 +113,7 @@ struct kirin_pcie {
#define CRGCTRL_PCIE_ASSERT_BIT 0x8c000000

/* Time for delay */
-#define REF_2_PERST_MIN 20000
+#define REF_2_PERST_MIN 21000
#define REF_2_PERST_MAX 25000
#define PERST_2_ACCESS_MIN 10000
#define PERST_2_ACCESS_MAX 12000
--
2.31.1
\
 
 \ /
  Last update: 2021-10-21 12:46    [W:0.186 / U:0.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site