lkml.org 
[lkml]   [2021]   [Oct]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] ARM: dts: spear13xx: Drop malformed 'interrupt-map' on PCI nodes
On Mon, Oct 4, 2021 at 1:14 AM Viresh Kumar <viresh.kumar@linaro.org> wrote:
>
> On 28-09-21, 14:21, Rob Herring wrote:
> > The spear13xx PCI 'interrupt-map' property is not parse-able.
> > '#interrupt-cells' is missing and there are 3 #address-cells. Based on the
> > driver, the only supported interrupt is for MSI. Therefore, 'interrupt-map'
> > is not needed.
> >
> > Cc: Viresh Kumar <vireshk@kernel.org>
> > Cc: Shiraz Hashim <shiraz.linux.kernel@gmail.com>
> > Cc: linux-arm-kernel@lists.infradead.org
> > Signed-off-by: Rob Herring <robh@kernel.org>
> > ---
> > arch/arm/boot/dts/spear1310.dtsi | 6 ------
> > arch/arm/boot/dts/spear1340.dtsi | 2 --
> > 2 files changed, 8 deletions(-)
> >
> > diff --git a/arch/arm/boot/dts/spear1310.dtsi b/arch/arm/boot/dts/spear1310.dtsi
> > index c4b49baf9804..2f746a9428a7 100644
> > --- a/arch/arm/boot/dts/spear1310.dtsi
> > +++ b/arch/arm/boot/dts/spear1310.dtsi
> > @@ -82,8 +82,6 @@ pcie0: pcie@b1000000 {
> > reg = <0xb1000000 0x4000>, <0x80000000 0x20000>;
> > reg-names = "dbi", "config";
> > interrupts = <0 68 0x4>;
> > - interrupt-map-mask = <0 0 0 0>;
> > - interrupt-map = <0x0 0 &gic 0 68 0x4>;
> > num-lanes = <1>;
> > phys = <&miphy0 1>;
> > phy-names = "pcie-phy";
> > @@ -101,8 +99,6 @@ pcie1: pcie@b1800000 {
> > reg = <0xb1800000 0x4000>, <0x90000000 0x20000>;
> > reg-names = "dbi", "config";
> > interrupts = <0 69 0x4>;
> > - interrupt-map-mask = <0 0 0 0>;
> > - interrupt-map = <0x0 0 &gic 0 69 0x4>;
> > num-lanes = <1>;
> > phys = <&miphy1 1>;
> > phy-names = "pcie-phy";
> > @@ -120,8 +116,6 @@ pcie2: pcie@b4000000 {
> > reg = <0xb4000000 0x4000>, <0xc0000000 0x20000>;
> > reg-names = "dbi", "config";
> > interrupts = <0 70 0x4>;
> > - interrupt-map-mask = <0 0 0 0>;
> > - interrupt-map = <0x0 0 &gic 0 70 0x4>;
> > num-lanes = <1>;
> > phys = <&miphy2 1>;
> > phy-names = "pcie-phy";
> > diff --git a/arch/arm/boot/dts/spear1340.dtsi b/arch/arm/boot/dts/spear1340.dtsi
> > index 1a8f5e8b10e3..827e887afbda 100644
> > --- a/arch/arm/boot/dts/spear1340.dtsi
> > +++ b/arch/arm/boot/dts/spear1340.dtsi
> > @@ -47,8 +47,6 @@ pcie0: pcie@b1000000 {
> > reg = <0xb1000000 0x4000>, <0x80000000 0x20000>;
> > reg-names = "dbi", "config";
> > interrupts = <0 68 0x4>;
> > - interrupt-map-mask = <0 0 0 0>;
> > - interrupt-map = <0x0 0 &gic 0 68 0x4>;
> > num-lanes = <1>;
> > phys = <&miphy0 1>;
> > phy-names = "pcie-phy";
>
> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>

Are you going to apply this?

Rob

\
 
 \ /
  Last update: 2021-10-21 23:13    [W:0.045 / U:1.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site