lkml.org 
[lkml]   [2021]   [Oct]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4 18/20] crypto: qce: Defer probing if BAM dma channel is not yet initialized
From
Date


On 10/13/21 6:55 AM, Bhupesh Sharma wrote:
> Since the Qualcomm qce crypto driver needs the BAM dma driver to be
> setup first (to allow crypto operations), it makes sense to defer
> the qce crypto driver probing in case the BAM dma driver is not yet
> probed.
>
> Move the code leg requesting dma channels earlier in the
> probe() flow. This fixes the qce probe failure issues when both qce
> and BMA dma are compiled as static part of the kernel.

Hi Bhupesh,

I am quite curious to know the nature of probe failure you are seeing
with the current sequence. I am not against changing the sequence but
for me when a driver is enabled, it is clocks first, interconnect next
and then dma. Also I have tested the current sequence on sm8150 with
both the modules built in as static and I have not seen the failure.

--
Warm Regards
Thara (She/Her/Hers)
>
> Cc: Thara Gopinath <thara.gopinath@linaro.org>
> Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
> ---
> drivers/crypto/qce/core.c | 20 ++++++++++++--------
> 1 file changed, 12 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/crypto/qce/core.c b/drivers/crypto/qce/core.c
> index cb8c77709e1e..c6f686126fc9 100644
> --- a/drivers/crypto/qce/core.c
> +++ b/drivers/crypto/qce/core.c
> @@ -209,9 +209,19 @@ static int qce_crypto_probe(struct platform_device *pdev)
> if (ret < 0)
> return ret;
>
> + /* qce driver requires BAM dma driver to be setup first.
> + * In case the dma channel are not set yet, this check
> + * helps use to return -EPROBE_DEFER earlier.
> + */
> + ret = qce_dma_request(qce->dev, &qce->dma);
> + if (ret)
> + return ret;
> +
> qce->mem_path = of_icc_get(qce->dev, "memory");
> - if (IS_ERR(qce->mem_path))
> + if (IS_ERR(qce->mem_path)) {
> + qce_dma_release(&qce->dma);
> return PTR_ERR(qce->mem_path);
> + }
>
> qce->core = devm_clk_get_optional(qce->dev, "core");
> if (IS_ERR(qce->core)) {
> @@ -247,10 +257,6 @@ static int qce_crypto_probe(struct platform_device *pdev)
> if (ret)
> goto err_clks_iface;
>
> - ret = qce_dma_request(qce->dev, &qce->dma);
> - if (ret)
> - goto err_clks;
> -
> ret = qce_check_version(qce);
> if (ret)
> goto err_clks;
> @@ -265,12 +271,10 @@ static int qce_crypto_probe(struct platform_device *pdev)
>
> ret = qce_register_algs(qce);
> if (ret)
> - goto err_dma;
> + goto err_clks;
>
> return 0;
>
> -err_dma:
> - qce_dma_release(&qce->dma);
> err_clks:
> clk_disable_unprepare(qce->bus);
> err_clks_iface:
>


\
 
 \ /
  Last update: 2021-10-20 16:11    [W:0.260 / U:2.780 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site