lkml.org 
[lkml]   [2021]   [Oct]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH] MIPS: Fix assembly error from MIPSr2 code used within MIPS_ISA_ARCH_LEVEL
Fix assembly errors like:

{standard input}: Assembler messages:
{standard input}:287: Error: opcode not supported on this processor: mips3 (mips3) `dins $10,$7,32,32'
{standard input}:680: Error: opcode not supported on this processor: mips3 (mips3) `dins $10,$7,32,32'
{standard input}:1274: Error: opcode not supported on this processor: mips3 (mips3) `dins $12,$9,32,32'
{standard input}:2175: Error: opcode not supported on this processor: mips3 (mips3) `dins $10,$7,32,32'
make[1]: *** [scripts/Makefile.build:277: mm/highmem.o] Error 1

with code produced from `__cmpxchg64' for MIPS64r2 configurations.

This is due to MIPS_ISA_ARCH_LEVEL downgrading the assembly architecture
to `r4000' for MIPS64r2 configurations while there is a block of code
containing a DINS MIPS64r2 instruction conditionalized on MIPS_ISA_REV
>= 2 within the scope of the downgrade.

The assembly architecture override is only there for the LLD/SCD
instructions, so fix the problem by wrapping these instructions on their
own only, following the practice established with commit cfd54de3b0e4
("MIPS: Avoid move psuedo-instruction whilst using MIPS_ISA_LEVEL") and
commit 378ed6f0e3c5 ("MIPS: Avoid using .set mips0 to restore ISA").

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes: c7e2d71dda7a ("MIPS: Fix set_pte() for Netlogic XLR using cmpxchg64()")
Cc: stable@vger.kernel.org # v5.1+
---
arch/mips/include/asm/cmpxchg.h | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)

linux-mips-cmpxchg64-isa-arch-level.diff
Index: linux-test/arch/mips/include/asm/cmpxchg.h
===================================================================
--- linux-test.orig/arch/mips/include/asm/cmpxchg.h
+++ linux-test/arch/mips/include/asm/cmpxchg.h
@@ -244,11 +244,12 @@ static inline unsigned long __cmpxchg64(
local_irq_save(flags);

asm volatile(
+ " " __SYNC(full, loongson3_war) " \n"
" .set push \n"
" .set " MIPS_ISA_ARCH_LEVEL " \n"
/* Load 64 bits from ptr */
- " " __SYNC(full, loongson3_war) " \n"
"1: lld %L0, %3 # __cmpxchg64 \n"
+ " .set pop \n"
/*
* Split the 64 bit value we loaded into the 2 registers that hold the
* ret variable.
@@ -276,11 +277,13 @@ static inline unsigned long __cmpxchg64(
" or %L1, %L1, $at \n"
" .set at \n"
# endif
+ " .set push \n"
+ " .set " MIPS_ISA_ARCH_LEVEL " \n"
/* Attempt to store new at ptr */
" scd %L1, %2 \n"
+ " .set pop \n"
/* If we failed, loop! */
"\t" __SC_BEQZ "%L1, 1b \n"
- " .set pop \n"
"2: " __SYNC(full, loongson3_war) " \n"
: "=&r"(ret),
"=&r"(tmp),
\
 
 \ /
  Last update: 2021-10-21 01:29    [W:0.405 / U:0.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site