Messages in this thread | | | Subject | Re: [PATCH v2 7/9] watchdog: Kconfig: fix help text indentation | From | Guenter Roeck <> | Date | Tue, 19 Oct 2021 08:06:26 -0700 |
| |
On 10/19/21 7:59 AM, Luca Ceresoli wrote: > Some entries indent their help text with 1 tab + 1 space or 1 tab only > instead of 1 tab + 2 spaces. Add the missing spaces. > > Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
FWIW, this patch should probably be handled separately, not as part of this series.
Anyway,
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
> --- > drivers/watchdog/Kconfig | 48 ++++++++++++++++++++-------------------- > 1 file changed, 24 insertions(+), 24 deletions(-) > > diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig > index bf59faeb3de1..a24385099a91 100644 > --- a/drivers/watchdog/Kconfig > +++ b/drivers/watchdog/Kconfig > @@ -694,10 +694,10 @@ config MAX77620_WATCHDOG > depends on MFD_MAX77620 || COMPILE_TEST > select WATCHDOG_CORE > help > - This is the driver for the Max77620 watchdog timer. > - Say 'Y' here to enable the watchdog timer support for > - MAX77620 chips. To compile this driver as a module, > - choose M here: the module will be called max77620_wdt. > + This is the driver for the Max77620 watchdog timer. > + Say 'Y' here to enable the watchdog timer support for > + MAX77620 chips. To compile this driver as a module, > + choose M here: the module will be called max77620_wdt. > > config IMX2_WDT > tristate "IMX2+ Watchdog" > @@ -1453,26 +1453,26 @@ config TQMX86_WDT > depends on X86 > select WATCHDOG_CORE > help > - This is the driver for the hardware watchdog timer in the TQMX86 IO > - controller found on some of their ComExpress Modules. > + This is the driver for the hardware watchdog timer in the TQMX86 IO > + controller found on some of their ComExpress Modules. > > - To compile this driver as a module, choose M here; the module > - will be called tqmx86_wdt. > + To compile this driver as a module, choose M here; the module > + will be called tqmx86_wdt. > > - Most people will say N. > + Most people will say N. > > config VIA_WDT > tristate "VIA Watchdog Timer" > depends on X86 && PCI > select WATCHDOG_CORE > help > - This is the driver for the hardware watchdog timer on VIA > - southbridge chipset CX700, VX800/VX820 or VX855/VX875. > + This is the driver for the hardware watchdog timer on VIA > + southbridge chipset CX700, VX800/VX820 or VX855/VX875. > > - To compile this driver as a module, choose M here; the module > - will be called via_wdt. > + To compile this driver as a module, choose M here; the module > + will be called via_wdt. > > - Most people will say N. > + Most people will say N. > > config W83627HF_WDT > tristate "Watchdog timer for W83627HF/W83627DHG and compatibles" > @@ -1758,10 +1758,10 @@ config BCM7038_WDT > depends on HAS_IOMEM > depends on ARCH_BRCMSTB || BMIPS_GENERIC || COMPILE_TEST > help > - Watchdog driver for the built-in hardware in Broadcom 7038 and > - later SoCs used in set-top boxes. BCM7038 was made public > - during the 2004 CES, and since then, many Broadcom chips use this > - watchdog block, including some cable modem chips. > + Watchdog driver for the built-in hardware in Broadcom 7038 and > + later SoCs used in set-top boxes. BCM7038 was made public > + during the 2004 CES, and since then, many Broadcom chips use this > + watchdog block, including some cable modem chips. > > config IMGPDC_WDT > tristate "Imagination Technologies PDC Watchdog Timer" > @@ -2122,12 +2122,12 @@ config KEEMBAY_WATCHDOG > depends on ARCH_KEEMBAY || (ARM64 && COMPILE_TEST) > select WATCHDOG_CORE > help > - This option enable support for an In-secure watchdog timer driver for > - Intel Keem Bay SoC. This WDT has a 32 bit timer and decrements in every > - count unit. An interrupt will be triggered, when the count crosses > - the threshold configured in the register. > + This option enable support for an In-secure watchdog timer driver for > + Intel Keem Bay SoC. This WDT has a 32 bit timer and decrements in every > + count unit. An interrupt will be triggered, when the count crosses > + the threshold configured in the register. > > - To compile this driver as a module, choose M here: the > - module will be called keembay_wdt. > + To compile this driver as a module, choose M here: the > + module will be called keembay_wdt. > > endif # WATCHDOG >
| |