lkml.org 
[lkml]   [2021]   [Oct]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v12 2/5] soc: qcom: Add Sleep stats driver
From
Date
Hi Shawn,

On 10/19/2021 2:54 PM, Shawn Guo wrote:
> Hi Maulik,
>
> On Wed, Oct 13, 2021 at 12:08:21PM +0530, Maulik Shah wrote:
>> From: Mahesh Sivasubramanian <msivasub@codeaurora.org>
>>
>> Let's add a driver to read the stats from remote processor and
>> export to debugfs.
>>
>> The driver creates "qcom_sleep_stats" directory in debugfs and
>> adds files for various low power mode available. Below is sample
>> output with command
>>
>> cat /sys/kernel/debug/qcom_sleep_stats/ddr
>> count = 0
>> Last Entered At = 0
>> Last Exited At = 0
>> Accumulated Duration = 0
>>
>> Signed-off-by: Mahesh Sivasubramanian <msivasub@codeaurora.org>
>> Signed-off-by: Lina Iyer <ilina@codeaurora.org>
>> [mkshah: add subsystem sleep stats, create one file for each stat]
>> Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
>> ---
>> drivers/soc/qcom/Kconfig | 10 ++
>> drivers/soc/qcom/Makefile | 1 +
>> drivers/soc/qcom/qcom_stats.c | 277 ++++++++++++++++++++++++++++++++++++++++++
>> 3 files changed, 288 insertions(+)
>> create mode 100644 drivers/soc/qcom/qcom_stats.c
>>
>> diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
>> index abfef20..3cf3a6b 100644
>> --- a/drivers/soc/qcom/Kconfig
>> +++ b/drivers/soc/qcom/Kconfig
>> @@ -199,6 +199,16 @@ config QCOM_SPM
>> to manage cores, L2 low power modes and to configure the internal
>> Adaptive Voltage Scaler parameters, where supported.
>>
>> +config QCOM_STATS
>> + tristate "Qualcomm Technologies, Inc. (QTI) Sleep stats driver"
>> + depends on (ARCH_QCOM && DEBUG_FS) || COMPILE_TEST
>> + depends on QCOM_SMEM
>> + help
>> + Qualcomm Technologies, Inc. (QTI) Sleep stats driver to read
>> + the shared memory exported by the remote processor related to
>> + various SoC level low power modes statistics and export to debugfs
>> + interface.
>> +
>> config QCOM_WCNSS_CTRL
>> tristate "Qualcomm WCNSS control driver"
>> depends on ARCH_QCOM || COMPILE_TEST
>> diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
>> index 24514c7..70d5de6 100644
>> --- a/drivers/soc/qcom/Makefile
>> +++ b/drivers/soc/qcom/Makefile
>> @@ -21,6 +21,7 @@ obj-$(CONFIG_QCOM_SMP2P) += smp2p.o
>> obj-$(CONFIG_QCOM_SMSM) += smsm.o
>> obj-$(CONFIG_QCOM_SOCINFO) += socinfo.o
>> obj-$(CONFIG_QCOM_SPM) += spm.o
>> +obj-$(CONFIG_QCOM_STATS) += qcom_stats.o
>> obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o
>> obj-$(CONFIG_QCOM_APR) += apr.o
>> obj-$(CONFIG_QCOM_LLCC) += llcc-qcom.o
>> diff --git a/drivers/soc/qcom/qcom_stats.c b/drivers/soc/qcom/qcom_stats.c
>> new file mode 100644
>> index 0000000..817505b
>> --- /dev/null
>> +++ b/drivers/soc/qcom/qcom_stats.c
>> @@ -0,0 +1,277 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (c) 2011-2021, The Linux Foundation. All rights reserved.
>> + */
>> +
>> +#include <linux/debugfs.h>
>> +#include <linux/device.h>
>> +#include <linux/io.h>
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/seq_file.h>
>> +
>> +#include <linux/soc/qcom/smem.h>
>> +#include <clocksource/arm_arch_timer.h>
>> +
>> +#define RPM_DYNAMIC_ADDR 0x14
>> +#define RPM_DYNAMIC_ADDR_MASK 0xFFFF
>> +
>> +#define STAT_TYPE_OFFSET 0x0
>> +#define COUNT_OFFSET 0x4
>> +#define LAST_ENTERED_AT_OFFSET 0x8
>> +#define LAST_EXITED_AT_OFFSET 0x10
>> +#define ACCUMULATED_OFFSET 0x18
>> +#define CLIENT_VOTES_OFFSET 0x1c
>
> From downstream 'struct msm_rpm_stats_data' [1], it looks that
> CLIENT_VOTES_OFFSET should be 0x20?

Thanks for catching this. yeah this should be 0x20 offset.
I can submit a new patch to fix this as the current series is merged in
linux-next.

Thanks,
Maulik

>
> Shawn
>
> [1] https://source.codeaurora.org/quic/la/kernel/msm-4.19/tree/drivers/soc/qcom/rpm_stats.c?h=kernel.lnx.4.19.r17-rel#n46
>
>> +
>> +struct subsystem_data {
>> + const char *name;
>> + u32 smem_item;
>> + u32 pid;
>> +};
>> +
>> +static const struct subsystem_data subsystems[] = {
>> + { "modem", 605, 1 },
>> + { "wpss", 605, 13 },
>> + { "adsp", 606, 2 },
>> + { "cdsp", 607, 5 },
>> + { "slpi", 608, 3 },
>> + { "gpu", 609, 0 },
>> + { "display", 610, 0 },
>> + { "adsp_island", 613, 2 },
>> + { "slpi_island", 613, 3 },
>> +};
>> +
>> +struct stats_config {
>> + size_t stats_offset;
>> + size_t num_records;
>> + bool appended_stats_avail;
>> + bool dynamic_offset;
>> + bool subsystem_stats_in_smem;
>> +};
>> +
>> +struct stats_data {
>> + bool appended_stats_avail;
>> + void __iomem *base;
>> +};
>> +
>> +struct sleep_stats {
>> + u32 stat_type;
>> + u32 count;
>> + u64 last_entered_at;
>> + u64 last_exited_at;
>> + u64 accumulated;
>> +};
>> +
>> +struct appended_stats {
>> + u32 client_votes;
>> + u32 reserved[3];
>> +};
>> +
>> +static void qcom_print_stats(struct seq_file *s, const struct sleep_stats *stat)
>> +{
>> + u64 accumulated = stat->accumulated;
>> + /*
>> + * If a subsystem is in sleep when reading the sleep stats adjust
>> + * the accumulated sleep duration to show actual sleep time.
>> + */
>> + if (stat->last_entered_at > stat->last_exited_at)
>> + accumulated += arch_timer_read_counter() - stat->last_entered_at;
>> +
>> + seq_printf(s, "Count: %u\n", stat->count);
>> + seq_printf(s, "Last Entered At: %llu\n", stat->last_entered_at);
>> + seq_printf(s, "Last Exited At: %llu\n", stat->last_exited_at);
>> + seq_printf(s, "Accumulated Duration: %llu\n", accumulated);
>> +}
>> +
>> +static int qcom_subsystem_sleep_stats_show(struct seq_file *s, void *unused)
>> +{
>> + struct subsystem_data *subsystem = s->private;
>> + struct sleep_stats *stat;
>> +
>> + /* Items are allocated lazily, so lookup pointer each time */
>> + stat = qcom_smem_get(subsystem->pid, subsystem->smem_item, NULL);
>> + if (IS_ERR(stat))
>> + return -EIO;
>> +
>> + qcom_print_stats(s, stat);
>> +
>> + return 0;
>> +}
>> +
>> +static int qcom_soc_sleep_stats_show(struct seq_file *s, void *unused)
>> +{
>> + struct stats_data *d = s->private;
>> + void __iomem *reg = d->base;
>> + struct sleep_stats stat;
>> +
>> + memcpy_fromio(&stat, reg, sizeof(stat));
>> + qcom_print_stats(s, &stat);
>> +
>> + if (d->appended_stats_avail) {
>> + struct appended_stats votes;
>> +
>> + memcpy_fromio(&votes, reg + CLIENT_VOTES_OFFSET, sizeof(votes));
>> + seq_printf(s, "Client Votes: %#x\n", votes.client_votes);
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +DEFINE_SHOW_ATTRIBUTE(qcom_soc_sleep_stats);
>> +DEFINE_SHOW_ATTRIBUTE(qcom_subsystem_sleep_stats);
>> +
>> +static void qcom_create_soc_sleep_stat_files(struct dentry *root, void __iomem *reg,
>> + struct stats_data *d,
>> + const struct stats_config *config)
>> +{
>> + char stat_type[sizeof(u32) + 1] = {0};
>> + size_t stats_offset = config->stats_offset;
>> + u32 offset = 0, type;
>> + int i, j;
>> +
>> + /*
>> + * On RPM targets, stats offset location is dynamic and changes from target
>> + * to target and sometimes from build to build for same target.
>> + *
>> + * In such cases the dynamic address is present at 0x14 offset from base
>> + * address in devicetree. The last 16bits indicates the stats_offset.
>> + */
>> + if (config->dynamic_offset) {
>> + stats_offset = readl(reg + RPM_DYNAMIC_ADDR);
>> + stats_offset &= RPM_DYNAMIC_ADDR_MASK;
>> + }
>> +
>> + for (i = 0; i < config->num_records; i++) {
>> + d[i].base = reg + offset + stats_offset;
>> +
>> + /*
>> + * Read the low power mode name and create debugfs file for it.
>> + * The names read could be of below,
>> + * (may change depending on low power mode supported).
>> + * For rpmh-sleep-stats: "aosd", "cxsd" and "ddr".
>> + * For rpm-sleep-stats: "vmin" and "vlow".
>> + */
>> + type = readl(d[i].base);
>> + for (j = 0; j < sizeof(u32); j++) {
>> + stat_type[j] = type & 0xff;
>> + type = type >> 8;
>> + }
>> + strim(stat_type);
>> + debugfs_create_file(stat_type, 0400, root, &d[i],
>> + &qcom_soc_sleep_stats_fops);
>> +
>> + offset += sizeof(struct sleep_stats);
>> + if (d[i].appended_stats_avail)
>> + offset += sizeof(struct appended_stats);
>> + }
>> +}
>> +
>> +static void qcom_create_subsystem_stat_files(struct dentry *root,
>> + const struct stats_config *config)
>> +{
>> + const struct sleep_stats *stat;
>> + int i;
>> +
>> + if (!config->subsystem_stats_in_smem)
>> + return;
>> +
>> + for (i = 0; i < ARRAY_SIZE(subsystems); i++) {
>> + stat = qcom_smem_get(subsystems[i].pid, subsystems[i].smem_item, NULL);
>> + if (IS_ERR(stat))
>> + continue;
>> +
>> + debugfs_create_file(subsystems[i].name, 0400, root, (void *)&subsystems[i],
>> + &qcom_subsystem_sleep_stats_fops);
>> + }
>> +}
>> +
>> +static int qcom_stats_probe(struct platform_device *pdev)
>> +{
>> + void __iomem *reg;
>> + struct dentry *root;
>> + const struct stats_config *config;
>> + struct stats_data *d;
>> + int i;
>> +
>> + config = device_get_match_data(&pdev->dev);
>> + if (!config)
>> + return -ENODEV;
>> +
>> + reg = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
>> + if (IS_ERR(reg))
>> + return -ENOMEM;
>> +
>> + d = devm_kcalloc(&pdev->dev, config->num_records,
>> + sizeof(*d), GFP_KERNEL);
>> + if (!d)
>> + return -ENOMEM;
>> +
>> + for (i = 0; i < config->num_records; i++)
>> + d[i].appended_stats_avail = config->appended_stats_avail;
>> +
>> + root = debugfs_create_dir("qcom_stats", NULL);
>> +
>> + qcom_create_subsystem_stat_files(root, config);
>> + qcom_create_soc_sleep_stat_files(root, reg, d, config);
>> +
>> + platform_set_drvdata(pdev, root);
>> +
>> + return 0;
>> +}
>> +
>> +static int qcom_stats_remove(struct platform_device *pdev)
>> +{
>> + struct dentry *root = platform_get_drvdata(pdev);
>> +
>> + debugfs_remove_recursive(root);
>> +
>> + return 0;
>> +}
>> +
>> +static const struct stats_config rpm_data = {
>> + .stats_offset = 0,
>> + .num_records = 2,
>> + .appended_stats_avail = true,
>> + .dynamic_offset = true,
>> + .subsystem_stats_in_smem = false,
>> +};
>> +
>> +static const struct stats_config rpmh_data = {
>> + .stats_offset = 0x48,
>> + .num_records = 3,
>> + .appended_stats_avail = false,
>> + .dynamic_offset = false,
>> + .subsystem_stats_in_smem = true,
>> +};
>> +
>> +static const struct of_device_id qcom_stats_table[] = {
>> + { .compatible = "qcom,rpm-stats", .data = &rpm_data },
>> + { .compatible = "qcom,rpmh-stats", .data = &rpmh_data },
>> + { }
>> +};
>> +MODULE_DEVICE_TABLE(of, qcom_stats_table);
>> +
>> +static struct platform_driver qcom_stats = {
>> + .probe = qcom_stats_probe,
>> + .remove = qcom_stats_remove,
>> + .driver = {
>> + .name = "qcom_stats",
>> + .of_match_table = qcom_stats_table,
>> + },
>> +};
>> +
>> +static int __init qcom_stats_init(void)
>> +{
>> + return platform_driver_register(&qcom_stats);
>> +}
>> +late_initcall(qcom_stats_init);
>> +
>> +static void __exit qcom_stats_exit(void)
>> +{
>> + platform_driver_unregister(&qcom_stats);
>> +}
>> +module_exit(qcom_stats_exit)
>> +
>> +MODULE_DESCRIPTION("Qualcomm Technologies, Inc. (QTI) Stats driver");
>> +MODULE_LICENSE("GPL v2");
>> --
>> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
>> of Code Aurora Forum, hosted by The Linux Foundation
>>

--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a
member of Code Aurora Forum, hosted by The Linux Foundation

\
 
 \ /
  Last update: 2021-10-19 13:34    [W:0.236 / U:0.268 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site