lkml.org 
[lkml]   [2021]   [Oct]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v4 net-next 0/7] net: dsa: add support for RTL8365MB-VC
Date
From: Alvin Šipraga <alsi@bang-olufsen.dk>

This series adds support for Realtek's RTL8365MB-VC, a 4+1 port
10/100/1000M Ethernet switch. The driver - rtl8365mb - was developed by
Michael Ramussen and myself.

This version of the driver is relatively slim, implementing only the
standalone port functionality and no offload capabilities. It is based
on a previous RFC series [1] from August, and the main difference is the
removal of some spurious VLAN operations. Otherwise I have simply
addressed most of the feedback. Please see the respective patches for
more detail.

In parallel I am working on offloading the bridge layer capabilities,
but I would like to get the basic stuff upstreamed as soon as possible.

v3 -> v4:
- get irq before setting virq parents (fixes kernel test robot
warning)
- remove pad-to-72-bytes logic in tagger xmit (fixes DENG Qingfang's
suggestion); no longer needed as we set CPU minimum RX size to 64
bytes
- use mutex to protect MIB counter access instead of a spinlock (fixes
Jakub's feedback on v3 statistics refactoring)

v2 -> v3:
- move IRQ setup earlier in probe per Florian's suggestion
- fix compilation error on some archs due to FIELD_PREP use in v1
- follow Jakub's suggestion and use the standard ethtool stats API;
NOTE: new patch in the series for relevant DSA plumbing
- following the stats change, it became apparent that the rtl8366
helper library is no longer that helpful; scrap it and implement
the ethtool ops specifically for this chip

v1 -> v2:
- drop DSA port type checks during MAC configuration
- use OF properties to configure RGMII TX/RX delay
- don't set default fwd_offload_mark if packet is trapped to CPU
- remove port mapping macros
- update device tree bindings documentation with an example
- cosmetic changes to the tagging driver using FIELD_* macros

[1] https://lore.kernel.org/netdev/20210822193145.1312668-1-alvin@pqrs.dk/

Alvin Šipraga (7):
ether: add EtherType for proprietary Realtek protocols
net: dsa: allow reporting of standard ethtool stats for slave devices
net: dsa: move NET_DSA_TAG_RTL4_A to right place in Kconfig/Makefile
dt-bindings: net: dsa: realtek-smi: document new compatible rtl8365mb
net: dsa: tag_rtl8_4: add realtek 8 byte protocol 4 tag
net: dsa: realtek-smi: add rtl8365mb subdriver for RTL8365MB-VC
net: phy: realtek: add support for RTL8365MB-VC internal PHYs

.../bindings/net/dsa/realtek-smi.txt | 87 +
drivers/net/dsa/Kconfig | 1 +
drivers/net/dsa/Makefile | 2 +-
drivers/net/dsa/realtek-smi-core.c | 4 +
drivers/net/dsa/realtek-smi-core.h | 1 +
drivers/net/dsa/rtl8365mb.c | 1982 +++++++++++++++++
drivers/net/phy/realtek.c | 8 +
include/net/dsa.h | 8 +
include/uapi/linux/if_ether.h | 1 +
net/dsa/Kconfig | 20 +-
net/dsa/Makefile | 3 +-
net/dsa/slave.c | 34 +
net/dsa/tag_rtl8_4.c | 178 ++
13 files changed, 2320 insertions(+), 9 deletions(-)
create mode 100644 drivers/net/dsa/rtl8365mb.c
create mode 100644 net/dsa/tag_rtl8_4.c

--
2.32.0

\
 
 \ /
  Last update: 2021-10-18 11:40    [W:0.053 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site