lkml.org 
[lkml]   [2021]   [Oct]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patches in this message
/
Date
From
SubjectRe: [PATCH v3 2/2] firmware: arm_scmi: Add optee transport
On Mon, Oct 18, 2021 at 01:40:46PM +0200, Etienne Carriere wrote:
> Add a new transport channel to the SCMI firmware interface driver for
> SCMI message exchange based on optee transport channel. The optee
> transport is realized by connecting and invoking OP-TEE SCMI service
> interface PTA.
>
> Optee transport support (CONFIG_ARM_SCMI_TRANSPORT_OPTEE) is default
> enabled when optee driver (CFG_OPTEE) is enabled. Effective optee
> transport is setup upon OP-TEE SCMI service discovery at optee
> device initialization. For this SCMI UUID is registered to the optee
> bus for probing. This is done at device_init initcall level, after
> optee bus initialization that is done at subsys_init level, as the scmi
> driver initialization.
>
> The optee transport can use a statically defined shared memory in
> which case SCMI device tree node defines it using an "arm,scmi-shmem"
> compatible phandle through property shmem. Alternatively, optee transport
> allocates the shared memory buffer from the optee driver when no shmem
> property is defined.
>
> The protocol used to exchange SCMI message over that shared memory is
> negotiated between optee transport driver and the OP-TEE service through
> capabilities exchange.
>
> OP-TEE SCMI service is integrated in OP-TEE since its release tag 3.13.0.
> The service interface is published in [1].
>
> Link: [1] https://github.com/OP-TEE/optee_os/blob/3.13.0/lib/libutee/include/pta_scmi_client.h
> Cc: Cristian Marussi <cristian.marussi@arm.com>
> Cc: Sudeep Holla <sudeep.holla@arm.com>
> Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
> ---
> Changes since v2:
> - Rebase on for-next/scmi, based on Linux v5.15-rc1.
> - Implement support for dynamic and static shared memory.
> - Factorize some functions and simplify transport exit sequence.
> - Rename driver source file from optee_service.c to optee.c.
>
> No change since v1
> ---

Hi Etienne,

a few remarks below.

> drivers/firmware/arm_scmi/Kconfig | 12 +
> drivers/firmware/arm_scmi/Makefile | 1 +
> drivers/firmware/arm_scmi/common.h | 3 +
> drivers/firmware/arm_scmi/driver.c | 3 +
> drivers/firmware/arm_scmi/optee.c | 559 +++++++++++++++++++++++++++++
> 5 files changed, 578 insertions(+)
> create mode 100644 drivers/firmware/arm_scmi/optee.c
>
> diff --git a/drivers/firmware/arm_scmi/Kconfig b/drivers/firmware/arm_scmi/Kconfig
> index 3d7081e84853..9107e249023c 100644
> --- a/drivers/firmware/arm_scmi/Kconfig
> +++ b/drivers/firmware/arm_scmi/Kconfig
> @@ -77,6 +77,18 @@ config ARM_SCMI_TRANSPORT_VIRTIO
> If you want the ARM SCMI PROTOCOL stack to include support for a
> transport based on VirtIO, answer Y.
>
> +config ARM_SCMI_TRANSPORT_OPTEE
> + bool "SCMI transport based on OP-TEE service"
> + depends on OPTEE
> + select ARM_SCMI_HAVE_TRANSPORT
> + select ARM_SCMI_HAVE_SHMEM
> + default y
> + help
> + This enables the OP-TEE service based transport for SCMI.
> +
> + If you want the ARM SCMI PROTOCOL stack to include support for a
> + transport based on OP-TEE SCMI service, answer Y.
> +
> endif #ARM_SCMI_PROTOCOL
>

So this 'depends on OPTEE' reminded me of a similar issue on VIRTIO
transport spotted by a bot (see the fix for Virtio at: c90521a0e94f firmware:
arm_scmi: Fix virtio transport Kconfig dependency), that consiste in a broken
build when SCMI was compiled built-in with VIRTIO transport support with
ARM_SCMI_PROTOCOL=y while the core was CONFIG_VIRTIO=m.

So I tried similarly to set CONFIG_OPTEE=m while keeping ARM_SCMI_PROTOCOL=y
expecting to see a similar issue as in VirtIO (i.e. not being able to access
optee module symbols from the builtin SCMI), instead I spotted a different bug :D

AR drivers/base/built-in.a
/home/crimar01/ARM/dev/src/pdsw/linux/drivers/firmware/arm_scmi/optee.c: In function ‘invoke_process_smt_channel’:
/home/crimar01/ARM/dev/src/pdsw/linux/drivers/firmware/arm_scmi/optee.c:233:27: error: ‘scmi_optee_desc’ undeclared (first use in this function); did you mean ‘scmi_smc_desc’?
const size_t msg_size = scmi_optee_desc.max_msg_size;
^~~~~~~~~~~~~~~
scmi_smc_desc
/home/crimar01/ARM/dev/src/pdsw/linux/drivers/firmware/arm_scmi/optee.c:233:27: note: each undeclared identifier is reported only once for each function it appears in
/home/crimar01/ARM/dev/src/pdsw/linux/drivers/firmware/arm_scmi/optee.c: In function ‘setup_dynamic_shmem’:
/home/crimar01/ARM/dev/src/pdsw/linux/drivers/firmware/arm_scmi/optee.c:266:26: error: ‘scmi_optee_desc’ undeclared (first use in this function); did you mean ‘scmi_smc_desc’?
const size_t msg_size = scmi_optee_desc.max_msg_size;
^~~~~~~~~~~~~~~
scmi_smc_desc
/home/crimar01/ARM/dev/src/pdsw/linux/scripts/Makefile.build:277: recipe for target 'drivers/firmware/arm_scmi/optee.o' failed
make[4]: *** [drivers/firmware/arm_scmi/optee.o] Error 1
make[4]: *** Waiting for unfinished jobs....

In fact those scmi_optee_desc are reference to a global only declared
down below. Fixed with a few defines to carry on:

---8<------------------

diff --git a/drivers/firmware/arm_scmi/optee.c b/drivers/firmware/arm_scmi/optee.c
index 64aaba4a8bf2..93a84c91457b 100644
--- a/drivers/firmware/arm_scmi/optee.c
+++ b/drivers/firmware/arm_scmi/optee.c
@@ -18,6 +18,8 @@

#define DRIVER_NAME "optee-scmi"

+#define SCMI_OPTEE_MAX_MSG_SIZE 128
+
enum optee_smci_pta_cmd {
/*
* PTA_SCMI_CMD_CAPABILITIES - Get channel capabilities
@@ -230,7 +232,7 @@ static int invoke_process_smt_channel(struct optee_channel *channel)
param[0].u.value.a = channel->channel_id;

if (channel->tee_shm) {
- const size_t msg_size = scmi_optee_desc.max_msg_size;
+ const size_t msg_size = SCMI_OPTEE_MAX_MSG_SIZE;

param[1].attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INOUT;
param[1].u.memref.shm = channel->tee_shm;
@@ -263,7 +265,7 @@ static bool optee_chan_available(struct device *dev, int idx)

static int setup_dynamic_shmem(struct device *dev, struct optee_channel *channel)
{
- const size_t msg_size = scmi_optee_desc.max_msg_size;
+ const size_t msg_size = SCMI_OPTEE_MAX_MSG_SIZE;

channel->tee_shm = tee_shm_alloc_kernel_buf(optee_private->tee_ctx, msg_size);
if (IS_ERR(channel->tee_shm)) {
-----------------------------
After the above change it compiled fine, so I went a step further and configured also
CONFIG_TEE=m (just trying to reproduce what bot saw on similar VirtIO eeh.... not that
I am so evil and sadic :D)
And indeed now (with ARM_SCMI_PROTOCOL=y and CONFIG_TEE=m) I get:


GEN modules.builtin
LD .tmp_vmlinux.kallsyms1
/opt/toolchains/gcc-arm-8.3-2019.03-x86_64-aarch64-linux-gnu/bin/aarch64-linux-gnu-ld: Unexpected GOT/PLT entries detected!
/opt/toolchains/gcc-arm-8.3-2019.03-x86_64-aarch64-linux-gnu/bin/aarch64-linux-gnu-ld: Unexpected run-time procedure linkages detected!
/opt/toolchains/gcc-arm-8.3-2019.03-x86_64-aarch64-linux-gnu/bin/aarch64-linux-gnu-ld: drivers/firmware/arm_scmi/optee.o: in function `invoke_process_smt_channel':
/home/crimar01/ARM/dev/src/pdsw/linux/drivers/firmware/arm_scmi/optee.c:247: undefined reference to `tee_client_invoke_func'
/opt/toolchains/gcc-arm-8.3-2019.03-x86_64-aarch64-linux-gnu/bin/aarch64-linux-gnu-ld: /home/crimar01/ARM/dev/src/pdsw/linux/drivers/firmware/arm_scmi/optee.c:247: undefined reference to `tee_client_invoke_func'
/opt/toolchains/gcc-arm-8.3-2019.03-x86_64-aarch64-linux-gnu/bin/aarch64-linux-gnu-ld: drivers/firmware/arm_scmi/optee.o: in function `optee_chan_free':
/home/crimar01/ARM/dev/src/pdsw/linux/drivers/firmware/arm_scmi/optee.c:397: undefined reference to `tee_shm_free'
/opt/toolchains/gcc-arm-8.3-2019.03-x86_64-aarch64-linux-gnu/bin/aarch64-linux-gnu-ld: drivers/firmware/arm_scmi/optee.o: in function `open_session':
/home/crimar01/ARM/dev/src/pdsw/linux/drivers/firmware/arm_scmi/optee.c:137: undefined reference to `tee_client_open_session'
/opt/toolchains/gcc-arm-8.3-2019.03-x86_64-aarch64-linux-gnu/bin/aarch64-linux-gnu-ld: drivers/firmware/arm_scmi/optee.o: in function `optee_service_remove':
/home/crimar01/ARM/dev/src/pdsw/linux/drivers/firmware/arm_scmi/optee.c:516: undefined reference to `tee_client_close_context'
/opt/toolchains/gcc-arm-8.3-2019.03-x86_64-aarch64-linux-gnu/bin/aarch64-linux-gnu-ld: drivers/firmware/arm_scmi/optee.o: in function `optee_service_probe':
/home/crimar01/ARM/dev/src/pdsw/linux/drivers/firmware/arm_scmi/optee.c:481: undefined reference to `tee_client_open_context'
/opt/toolchains/gcc-arm-8.3-2019.03-x86_64-aarch64-linux-gnu/bin/aarch64-linux-gnu-ld: /home/crimar01/ARM/dev/src/pdsw/linux/drivers/firmware/arm_scmi/optee.c:501: undefined reference to `tee_client_close_context'
/opt/toolchains/gcc-arm-8.3-2019.03-x86_64-aarch64-linux-gnu/bin/aarch64-linux-gnu-ld: drivers/firmware/arm_scmi/optee.o: in function `get_capabilities':
/home/crimar01/ARM/dev/src/pdsw/linux/drivers/firmware/arm_scmi/optee.c:172: undefined reference to `tee_client_invoke_func'
/opt/toolchains/gcc-arm-8.3-2019.03-x86_64-aarch64-linux-gnu/bin/aarch64-linux-gnu-ld: drivers/firmware/arm_scmi/optee.o: in function `close_session':
/home/crimar01/ARM/dev/src/pdsw/linux/drivers/firmware/arm_scmi/optee.c:151: undefined reference to `tee_client_close_session'
/opt/toolchains/gcc-arm-8.3-2019.03-x86_64-aarch64-linux-gnu/bin/aarch64-linux-gnu-ld: drivers/firmware/arm_scmi/optee.o: in function `get_channel':
/home/crimar01/ARM/dev/src/pdsw/linux/drivers/firmware/arm_scmi/optee.c:209: undefined reference to `tee_client_invoke_func'
/opt/toolchains/gcc-arm-8.3-2019.03-x86_64-aarch64-linux-gnu/bin/aarch64-linux-gnu-ld: drivers/firmware/arm_scmi/optee.o: in function `setup_dynamic_shmem':
/home/crimar01/ARM/dev/src/pdsw/linux/drivers/firmware/arm_scmi/optee.c:270: undefined reference to `tee_shm_alloc_kernel_buf'
/opt/toolchains/gcc-arm-8.3-2019.03-x86_64-aarch64-linux-gnu/bin/aarch64-linux-gnu-ld: /home/crimar01/ARM/dev/src/pdsw/linux/drivers/firmware/arm_scmi/optee.c:276: undefined reference to `tee_shm_get_va'
/opt/toolchains/gcc-arm-8.3-2019.03-x86_64-aarch64-linux-gnu/bin/aarch64-linux-gnu-ld: drivers/firmware/arm_scmi/optee.o: in function `close_session':
/home/crimar01/ARM/dev/src/pdsw/linux/drivers/firmware/arm_scmi/optee.c:151: undefined reference to `tee_client_close_session'
/opt/toolchains/gcc-arm-8.3-2019.03-x86_64-aarch64-linux-gnu/bin/aarch64-linux-gnu-ld: drivers/firmware/arm_scmi/optee.o:(.data+0x10): undefined reference to `tee_bus_type'
/home/crimar01/ARM/dev/src/pdsw/linux/Makefile:1189: recipe for target 'vmlinux' failed
make[1]: *** [vmlinux] Error 1
make[1]: Leaving directory '/home/crimar01/ARM/dev/src/pdsw/out_linux'
Makefile:219: recipe for target '__sub-make' failed

Taking a similar approach to Virtio, this fixed for me

diff --git a/drivers/firmware/arm_scmi/Kconfig b/drivers/firmware/arm_scmi/Kconfig
index 9107e249023c..30746350349c 100644
--- a/drivers/firmware/arm_scmi/Kconfig
+++ b/drivers/firmware/arm_scmi/Kconfig
@@ -79,7 +79,7 @@ config ARM_SCMI_TRANSPORT_VIRTIO

config ARM_SCMI_TRANSPORT_OPTEE
bool "SCMI transport based on OP-TEE service"
- depends on OPTEE
+ depends on OPTEE=y || OPTEE=ARM_SCMI_PROTOCOL
select ARM_SCMI_HAVE_TRANSPORT
select ARM_SCMI_HAVE_SHMEM
default y
which basically disables ARM_SCMI_TRANSPORT_OPTEE when CONFIG_OPTEE=m AND
ARM_SCMI_TRANSPORT_OPTEE=y: in this scenario if TEE is =m you have to build
ARM_SCMI_PROTOCOL=m too to be able to include ARM_SCMI_TRANSPORT_OPTEE.


> config ARM_SCMI_POWER_DOMAIN
> diff --git a/drivers/firmware/arm_scmi/Makefile b/drivers/firmware/arm_scmi/Makefile
> index 1dcf123d64ab..ef66ec8ca917 100644
> --- a/drivers/firmware/arm_scmi/Makefile
> +++ b/drivers/firmware/arm_scmi/Makefile
> @@ -6,6 +6,7 @@ scmi-transport-$(CONFIG_ARM_SCMI_TRANSPORT_MAILBOX) += mailbox.o
> scmi-transport-$(CONFIG_ARM_SCMI_TRANSPORT_SMC) += smc.o
> scmi-transport-$(CONFIG_ARM_SCMI_HAVE_MSG) += msg.o
> scmi-transport-$(CONFIG_ARM_SCMI_TRANSPORT_VIRTIO) += virtio.o
> +scmi-transport-$(CONFIG_ARM_SCMI_TRANSPORT_OPTEE) += optee.o
> scmi-protocols-y = base.o clock.o perf.o power.o reset.o sensors.o system.o voltage.o
> scmi-module-objs := $(scmi-bus-y) $(scmi-driver-y) $(scmi-protocols-y) \
> $(scmi-transport-y)
> diff --git a/drivers/firmware/arm_scmi/common.h b/drivers/firmware/arm_scmi/common.h
> index dea1bfbe1052..82ff3c3a6d2d 100644
> --- a/drivers/firmware/arm_scmi/common.h
> +++ b/drivers/firmware/arm_scmi/common.h
> @@ -421,6 +421,9 @@ extern const struct scmi_desc scmi_smc_desc;
> #ifdef CONFIG_ARM_SCMI_TRANSPORT_VIRTIO
> extern const struct scmi_desc scmi_virtio_desc;
> #endif
> +#ifdef CONFIG_OPTEE

This should be:

#ifdef CONFIG_ARM_SCMI_TRANSPORT_OPTEE

if not disabling OPTEE transport in Kconfig breaks the build.

LD .tmp_vmlinux.kallsyms1
/opt/toolchains/gcc-arm-8.3-2019.03-x86_64-aarch64-linux-gnu/bin/aarch64-linux-gnu-ld:
drivers/firmware/arm_scmi/driver.o:(.rodata+0x280): undefined reference
to `scmi_optee_desc'
/home/crimar01/ARM/dev/src/pdsw/linux/Makefile:1189: recipe for target
'vmlinux' failed
make[1]: *** [vmlinux] Error 1
make[1]: Leaving directory '/home/crimar01/ARM/dev/src/pdsw/out_linux'


> +extern const struct scmi_desc scmi_optee_desc;
> +#endif
>
> void scmi_rx_callback(struct scmi_chan_info *cinfo, u32 msg_hdr, void *priv);
> void scmi_free_channel(struct scmi_chan_info *cinfo, struct idr *idr, int id);
> diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c
> index b406b3f78f46..06f0a9846c7e 100644
> --- a/drivers/firmware/arm_scmi/driver.c
> +++ b/drivers/firmware/arm_scmi/driver.c
> @@ -1999,6 +1999,9 @@ static const struct of_device_id scmi_of_match[] = {
> #endif
> #ifdef CONFIG_ARM_SCMI_TRANSPORT_VIRTIO
> { .compatible = "arm,scmi-virtio", .data = &scmi_virtio_desc},
> +#endif
> +#ifdef CONFIG_OPTEE

Same as above should be #if CONFIG_ARM_SCMI_TRANSPORT_OPTEE

> + { .compatible = "linaro,scmi-optee", .data = &scmi_optee_desc },
> #endif
> { /* Sentinel */ },
> };
> diff --git a/drivers/firmware/arm_scmi/optee.c b/drivers/firmware/arm_scmi/optee.c
> new file mode 100644
> index 000000000000..e294cff37bea
> --- /dev/null
> +++ b/drivers/firmware/arm_scmi/optee.c
> @@ -0,0 +1,559 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2019-2021 Linaro Ltd.
> + */
> +
> +#include <linux/io.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/slab.h>
> +#include <linux/tee_drv.h>
> +#include <linux/uuid.h>
> +#include <uapi/linux/tee.h>
> +
> +#include "common.h"
> +
> +#define DRIVER_NAME "optee-scmi"
> +
> +enum optee_smci_pta_cmd {
^
scmi ? or is it another fancy 4letters acronym :D
> + /*
> + * PTA_SCMI_CMD_CAPABILITIES - Get channel capabilities
> + *
> + * [out] value[0].a: Capability bit mask (enum pta_scmi_caps)
> + * [out] value[0].b: Extended capabilities or 0
> + */
> + PTA_SCMI_CMD_CAPABILITIES = 0,
> +
> + /*
> + * PTA_SCMI_CMD_PROCESS_SMT_CHANNEL - Process SCMI message in SMT buffer
> + *
> + * [in] value[0].a: Channel handle
> + *
> + * Shared memory used for SCMI message/response exhange is expected
> + * already identified and bound to channel handle in both SCMI agent
> + * and SCMI server (OP-TEE) parts.
> + * The memory uses SMT header to carry SCMI meta-data (protocol ID and
> + * protocol message ID).
> + */
> + PTA_SCMI_CMD_PROCESS_SMT_CHANNEL = 1,
> +
> + /*
> + * PTA_SCMI_CMD_PROCESS_SMT_CHANNEL_MESSAGE - Process SMT/SCMI message
> + *
> + * [in] value[0].a: Channel handle
> + * [in/out] memref[1]: Message/response buffer (SMT and SCMI payload)
> + *
> + * Shared memory used for SCMI message/response is a SMT buffer
> + * referenced by param[1]. It shall be 128 bytes large to fit response
> + * payload whatever message playload size.
> + * The memory uses SMT header to carry SCMI meta-data (protocol ID and
> + * protocol message ID).
> + */
> + PTA_SCMI_CMD_PROCESS_SMT_CHANNEL_MESSAGE = 2,
> +
> + /*
> + * PTA_SCMI_CMD_GET_CHANNEL - Get channel handle
> + *
> + * SCMI shm information are 0 if agent expects to use OP-TEE regular SHM
> + *
> + * [in] value[0].a: Channel identifier
> + * [out] value[0].a: Returned channel handle
> + * [in] value[0].b: Requested capabilities mask (enum pta_scmi_caps)
> + */
> + PTA_SCMI_CMD_GET_CHANNEL = 3,
> +};
> +
> +/*
> + * Capabilities
> + */
> +enum pta_scmi_caps {
> + PTA_SCMI_CAPS_NONE = 0,
> + /*
> + * Supports command using SMT header protocol (SCMI shmem) in shared
> + * memory buffers to carry SCMI protocol synchronisation information.
> + */
> + PTA_SCMI_CAPS_SMT_HEADER = BIT(0),
> +};
> +
> +/**
> + * struct optee_channel - Description of an OP-TEE SCMI channel
> + *
> + * @channel_id: OP-TEE channel ID used for this transport
> + * @mu: Mutex protection on channel access
> + * @tee_session: TEE session identifier
> + * @cinfo: SCMI channel information
> + * @shmem: Virtual base address of the shared memory
> + * @tee_shm: Reference to TEE shared memory or NULL if using static shmem
> + * @caps: OP-TEE SCMI channel capabilities
> + * @link: Reference in agent's channel list
> + */
> +struct optee_channel {
> + u32 channel_id;
> + struct mutex mu;
> + u32 tee_session;
> + struct scmi_chan_info *cinfo;
> + struct scmi_shared_mem __iomem *shmem;
> + struct tee_shm *tee_shm;
> + enum pta_scmi_caps caps;
> + struct list_head link;
> +};
> +
> +/**
> + * struct optee_agent - OP-TEE transport private data
> + *
> + * @dev: Device used for communication with TEE
> + * @tee_ctx: TEE context used for communication
> + * @caps: Supported channel capabilities
> + * @mu: Mutex for protection of @channel_list
> + * @channel_list: List of all created channels for the agent
> + */
> +struct optee_agent {
> + struct device *dev;
> + struct tee_context *tee_ctx;
> + enum pta_scmi_caps caps;
> + struct mutex mu;
> + struct list_head channel_list;
> +};
> +
> +/* There can be only 1 SCMI service in OP-TEE we connect to */
> +static struct optee_agent *optee_private;
> +

Maybe naming these locally defined optee_ structs as scmi_optee_ ?

When I see those optee_ refs around down below I tend to think they
are OPTEE core structs not locally defined containers.
(I uderstand that depends on my poor familiarity with OPTEE APIs
though...)

> +/* Open a session toward SCMI OP-TEE service with REE_KERNEL identity */
> +static int open_session(u32 *tee_session)
> +{
> + struct device *dev = optee_private->dev;
> + struct tee_client_device *scmi_pta = to_tee_client_device(dev);
> + struct tee_ioctl_open_session_arg arg = { };
> + int ret;
> +
> + memcpy(arg.uuid, scmi_pta->id.uuid.b, TEE_IOCTL_UUID_LEN);
> + arg.clnt_login = TEE_IOCTL_LOGIN_REE_KERNEL;
> +
> + ret = tee_client_open_session(optee_private->tee_ctx, &arg, NULL);
> + if (ret < 0 || arg.ret) {
> + dev_err(dev, "Can't open tee session: %d / %#x\n", ret, arg.ret);
> +
> + return -EOPNOTSUPP;
> + }
> +
> + *tee_session = arg.session;
> +
> + return 0;
> +}
> +
> +static void close_session(u32 tee_session)
> +{
> + tee_client_close_session(optee_private->tee_ctx, tee_session);
> +}
> +
> +static int get_capabilities(void)
> +{
> + struct optee_agent *agent = optee_private;
> + struct tee_ioctl_invoke_arg arg = { };
> + struct tee_param param[1] = { };
> + u32 tee_session;
> + int ret;
> +
> + ret = open_session(&tee_session);
> + if (ret)
> + return ret;
> +
> + arg.func = PTA_SCMI_CMD_CAPABILITIES;
> + arg.session = tee_session;
> + arg.num_params = 1;
> +
> + param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT;
> +
> + ret = tee_client_invoke_func(agent->tee_ctx, &arg, param);
> +
> + close_session(tee_session);
> +
> + if (ret < 0 || arg.ret) {
> + dev_err(agent->dev, "Can't get capabilities: %d / %#x\n", ret, arg.ret);
> +
> + return -EOPNOTSUPP;
> + }
> +
> + agent->caps = param[0].u.value.a;
> +
> + if (!(agent->caps & PTA_SCMI_CAPS_SMT_HEADER)) {
> + dev_err(agent->dev, "OP-TEE SCMI PTA doesn't support SMT\n");
> +
> + return -EOPNOTSUPP;
> + }
> +
> + return 0;
> +}
> +
> +static int get_channel(struct optee_channel *channel)
> +{
> + struct device *dev = optee_private->dev;
> + struct tee_ioctl_invoke_arg arg = { };
> + struct tee_param param[1] = { };
> + unsigned int caps = PTA_SCMI_CAPS_SMT_HEADER;
> + int ret;
> +
> + arg.func = PTA_SCMI_CMD_GET_CHANNEL;
> + arg.session = channel->tee_session;
> + arg.num_params = 1;
> +
> + param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INOUT;
> + param[0].u.value.a = channel->channel_id;
> + param[0].u.value.b = caps;
> +
> + ret = tee_client_invoke_func(optee_private->tee_ctx, &arg, param);
> +
> + if (ret || arg.ret) {
> + dev_err(dev, "Can't get channel with caps %#x: %d / %#x\n", caps, ret, arg.ret);
> +
> + return -EOPNOTSUPP;
> + }
> +
> + /* From now on use channel identifer provided by OP-TEE SCMI service */
> + channel->channel_id = param[0].u.value.a;
> + channel->caps = caps;
> +
> + return 0;
> +}
> +
> +static int invoke_process_smt_channel(struct optee_channel *channel)
> +{
> + struct tee_ioctl_invoke_arg arg = { };
> + struct tee_param param[2] = { };
> + int ret;
> +
> + arg.session = channel->tee_session;
> + param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT;
> + param[0].u.value.a = channel->channel_id;
> +
> + if (channel->tee_shm) {
> + const size_t msg_size = scmi_optee_desc.max_msg_size;
> +
> + param[1].attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INOUT;
> + param[1].u.memref.shm = channel->tee_shm;
> + param[1].u.memref.size = msg_size;
> + arg.num_params = 2;
> + arg.func = PTA_SCMI_CMD_PROCESS_SMT_CHANNEL_MESSAGE;
> + } else {
> + arg.num_params = 1;
> + arg.func = PTA_SCMI_CMD_PROCESS_SMT_CHANNEL;
> + }
> +
> + ret = tee_client_invoke_func(optee_private->tee_ctx, &arg, param);
> + if (ret < 0 || arg.ret) {
> + dev_err(optee_private->dev, "Failed on channel %u: %d / %#x\n",
> + channel->channel_id, ret, arg.ret);
> +
> + return -EIO;
> + }
> +
> + return 0;
> +}
> +
> +static bool optee_chan_available(struct device *dev, int idx)
> +{
> + u32 channel_id;
> +
> + return !of_property_read_u32_index(dev->of_node, "linaro,optee-channel-id",
> + idx, &channel_id);
> +}
> +
> +static int setup_dynamic_shmem(struct device *dev, struct optee_channel *channel)
> +{
> + const size_t msg_size = scmi_optee_desc.max_msg_size;
> +
> + channel->tee_shm = tee_shm_alloc_kernel_buf(optee_private->tee_ctx, msg_size);
> + if (IS_ERR(channel->tee_shm)) {
> + dev_err(channel->cinfo->dev, "shmem allocation failed\n");
> + return -ENOMEM;
> + }
> +
> + channel->shmem = (void *)tee_shm_get_va(channel->tee_shm, 0);
> + memset(channel->shmem, 0, msg_size);
> + shmem_clear_channel(channel->shmem);
> +
> + return 0;
> +}
> +
> +static int setup_static_shmem(struct device *dev, struct scmi_chan_info *cinfo,
> + struct optee_channel *channel)
> +{
> + struct device_node *np;
> + resource_size_t size;
> + struct resource res;
> + int ret;
> +
> + np = of_parse_phandle(cinfo->dev->of_node, "shmem", 0);
> + if (!of_device_is_compatible(np, "arm,scmi-shmem")) {
> + ret = -ENXIO;
> + goto out;
> + }
> +
> + ret = of_address_to_resource(np, 0, &res);
> + if (ret) {
> + dev_err(dev, "Failed to get SCMI Tx shared memory\n");
> + goto out;
> + }
> +
> + size = resource_size(&res);
> +
> + channel->shmem = devm_ioremap(dev, res.start, size);
> + if (!channel->shmem) {
> + dev_err(dev, "Failed to ioremap SCMI Tx shared memory\n");
> + ret = -EADDRNOTAVAIL;
> + goto out;
> + }
> +
> + ret = 0;
> +
> +out:
> + of_node_put(np);
> +
> + return ret;
> +}
> +
> +static int optee_chan_setup_shmem(struct device *dev, struct scmi_chan_info *cinfo,
> + bool tx, struct optee_channel *channel)
> +{
> + struct device *cdev = cinfo->dev;
> +
> + if (of_find_property(cdev->of_node, "shmem", NULL))
> + return setup_static_shmem(dev, cinfo, channel);
> + else
> + return setup_dynamic_shmem(dev, channel);
> +}
> +
> +static void optee_clear_channel(struct scmi_chan_info *cinfo)
> +{
> + struct optee_channel *channel = cinfo->transport_info;
> +
> + shmem_clear_channel(channel->shmem);
> +}
> +
> +static int optee_chan_setup(struct scmi_chan_info *cinfo, struct device *dev, bool tx)
> +{
> + struct optee_channel *channel;
> + uint32_t channel_id;
> + int ret;
> +
> + if (!tx)
> + return -ENODEV;
> +
> + /* Shall wait for OP-TEE driver to be up and ready */
> + if (!optee_private || !optee_private->tee_ctx)
> + return -EPROBE_DEFER;
> +
> + channel = devm_kzalloc(dev, sizeof(*channel), GFP_KERNEL);
> + if (!channel)
> + return -ENOMEM;
> +
> + ret = of_property_read_u32_index(cinfo->dev->of_node, "linaro,optee-channel-id",
> + 0, &channel_id);
> + if (ret)
> + return ret;
> +
> + cinfo->transport_info = channel;
> + channel->cinfo = cinfo;
> + channel->channel_id = channel_id;
> + mutex_init(&channel->mu);
> +
> + ret = optee_chan_setup_shmem(dev, cinfo, tx, channel);
> + if (ret)
> + return ret;
> +
> + ret = open_session(&channel->tee_session);
> + if (ret)
> + return ret;
> +
> + ret = get_channel(channel);
> + if (ret) {
> + close_session(channel->tee_session);
> +
> + return ret;
> + }
> +
> + mutex_lock(&optee_private->mu);
> + list_add(&channel->link, &optee_private->channel_list);
> + mutex_unlock(&optee_private->mu);
> +
> + return 0;
> +}
> +
> +static int optee_chan_free(int id, void *p, void *data)
> +{
> + struct scmi_chan_info *cinfo = p;
> + struct optee_channel *channel = cinfo->transport_info;
> +
> + mutex_lock(&optee_private->mu);
> + list_del(&channel->link);
> + mutex_unlock(&optee_private->mu);
> +
> + if (channel->tee_shm) {
> + tee_shm_free(channel->tee_shm);
> + channel->tee_shm = NULL;
> + }
> +
> + cinfo->transport_info = NULL;
> + channel->cinfo = NULL;
> +
> + scmi_free_channel(cinfo, data, id);
> +
> + return 0;
> +}
> +
> +static struct scmi_shared_mem *get_channel_shm(struct optee_channel *chan, struct scmi_xfer *xfer)
> +{
> + if (!chan)
> + return NULL;
> +
> + return chan->shmem;
> +}
> +
> +
> +static int optee_send_message(struct scmi_chan_info *cinfo,
> + struct scmi_xfer *xfer)
> +{
> + struct optee_channel *channel = cinfo->transport_info;
> + struct scmi_shared_mem *shmem = get_channel_shm(channel, xfer);
> + int ret;
> +
> + mutex_lock(&channel->mu);
> + shmem_tx_prepare(shmem, xfer);
> +
> + ret = invoke_process_smt_channel(channel);

Here all the associated processing in the TrustedOS is fully completed
right ? i.e. all the possible reply values have been put into shmem by
the TrustedOS process before the underlying SMC call returns.
(just to understand better how OPTEE transport is supposed to behave)

> +
> + scmi_rx_callback(cinfo, shmem_read_header(shmem), NULL);
> + mutex_unlock(&channel->mu);
> +
> + return ret;
> +}
> +
> +static void optee_fetch_response(struct scmi_chan_info *cinfo,
> + struct scmi_xfer *xfer)
> +{
> + struct optee_channel *channel = cinfo->transport_info;
> + struct scmi_shared_mem *shmem = get_channel_shm(channel, xfer);
> +
> + shmem_fetch_response(shmem, xfer);
> +}
> +
> +static bool optee_poll_done(struct scmi_chan_info *cinfo,
> + struct scmi_xfer *xfer)
> +{
> + struct optee_channel *channel = cinfo->transport_info;
> + struct scmi_shared_mem *shmem = get_channel_shm(channel, xfer);
> +
> + return shmem_poll_done(shmem, xfer);
> +}
> +
> +static struct scmi_transport_ops scmi_optee_ops = {
> + .chan_available = optee_chan_available,
> + .chan_setup = optee_chan_setup,
> + .chan_free = optee_chan_free,
> + .send_message = optee_send_message,
> + .fetch_response = optee_fetch_response,
> + .clear_channel = optee_clear_channel,
> + .poll_done = optee_poll_done,
> +};
> +
> +const struct scmi_desc scmi_optee_desc = {
> + .ops = &scmi_optee_ops,
> + .max_rx_timeout_ms = 30,
> + .max_msg = 20,
> + .max_msg_size = 128,
> +};
> +
> +static int optee_ctx_match(struct tee_ioctl_version_data *ver, const void *data)
> +{
> + return ver->impl_id == TEE_IMPL_ID_OPTEE;
> +}
> +
> +static int optee_service_probe(struct device *dev)
> +{
> + struct optee_agent *agent;
> + struct tee_context *tee_ctx;
> + int ret;
> +
> + /* Only one SCMI OP-TEE device allowed */
> + if (optee_private) {
> + dev_err(dev, "An SCMI OP-TEE device was already initialized: only one allowed\n");
> + return -EBUSY;
> + }
> +
> + tee_ctx = tee_client_open_context(NULL, optee_ctx_match, NULL, NULL);
> + if (IS_ERR(tee_ctx))
> + return -ENODEV;
> +
> + agent = devm_kzalloc(dev, sizeof(*agent), GFP_KERNEL);
> + if (!agent) {
> + ret = -ENOMEM;
> + goto out;
> + }
> +
> + agent->dev = dev;
> + agent->tee_ctx = tee_ctx;
> + INIT_LIST_HEAD(&agent->channel_list);
> +
> + optee_private = agent;

Barrier here to be sure this global is visible and not reordered ?

Not sure if it is plausible that without a barrier the subsequent
optee_chan_setup could run on another core and simply miss this update
and bail out. (cannot see any locking of any kind either in the
chan_available/chan_setup TX path that could trigger a implicit memory
barrier....bah maybe I'm paranoid)
> +
> + ret = get_capabilities();
> +
> +out:
> + if (ret) {
> + tee_client_close_context(tee_ctx);
> + optee_private = NULL;

Barrier ? (not sure as above...)

> + }
> +
> + return ret;
> +}
> +
> +static int optee_service_remove(struct device *dev)
> +{
> + if (optee_private)
> + return -EINVAL;

Is it instead: if (!optee_private) ?
> +
> + if (!list_empty(&optee_private->channel_list))
> + return -EBUSY;
> +
> + tee_client_close_context(optee_private->tee_ctx);
> +
> + optee_private = NULL;
> +
Barrier ? (not sure as above...)

> + return 0;
> +}
> +
> +static const struct tee_client_device_id scmi_optee_service_id[] = {
> + {
> + UUID_INIT(0xa8cfe406, 0xd4f5, 0x4a2e,
> + 0x9f, 0x8d, 0xa2, 0x5d, 0xc7, 0x54, 0xc0, 0x99)
> + },
> + { }
> +};
> +
> +MODULE_DEVICE_TABLE(tee, scmi_optee_service_id);
> +
> +static struct tee_client_driver scmi_optee_driver = {
> + .id_table = scmi_optee_service_id,
> + .driver = {
> + .name = "scmi-optee",
> + .bus = &tee_bus_type,
> + .probe = optee_service_probe,
> + .remove = optee_service_remove,
> + },
> +};
> +
> +static int __init scmi_optee_init(void)
> +{
> + return driver_register(&scmi_optee_driver.driver);
> +}
> +
> +static void __exit scmi_optee_exit(void)
> +{
> + driver_unregister(&scmi_optee_driver.driver);
> +}
> +
> +device_initcall(scmi_optee_init)
> +module_exit(scmi_optee_exit);

This breaks the build when ARM_SCMI_PROTOCOL=m and SCMI OPTEE transport is enabled,
since the SCMI transports are not full fledged drivers but they are built into
the SCMI stack core module, so if you endup trying to define multiple inits.

LD [M] drivers/firmware/arm_scmi/scmi-module.o
/opt/toolchains/gcc-arm-8.3-2019.03-x86_64-aarch64-linux-gnu/bin/aarch64-linux-gnu-ld: drivers/firmware/arm_scmi/optee.o: in function `scmi_optee_init':
/home/crimar01/ARM/dev/src/pdsw/linux/drivers/firmware/arm_scmi/optee.c:549: multiple definition of `init_module'; drivers/firmware/arm_scmi/driver.o:/home/crimar01/ARM/dev/src/pdsw/linux/drivers/firmware/arm_scmi/driver.c:2070: first defined here
/opt/toolchains/gcc-arm-8.3-2019.03-x86_64-aarch64-linux-gnu/bin/aarch64-linux-gnu-ld: drivers/firmware/arm_scmi/optee.o: in function `scmi_optee_exit':
/home/crimar01/ARM/dev/src/pdsw/linux/drivers/firmware/arm_scmi/optee.c:554: multiple definition of `cleanup_module'; drivers/firmware/arm_scmi/driver.o:/home/crimar01/ARM/dev/src/pdsw/linux/drivers/firmware/arm_scmi/driver.c:2099: first defined here
/home/crimar01/ARM/dev/src/pdsw/linux/scripts/Makefile.build:474: recipe for target 'drivers/firmware/arm_scmi/scmi-module.o' failed
make[4]: *** [drivers/firmware/arm_scmi/scmi-module.o] Error 1
/home/crimar01/ARM/dev/src/pdsw/linux/scripts/Makefile.build:540: recipe for target 'drivers/firmware/arm_scmi' failed
make[3]: *** [drivers/firmware/arm_scmi] Error 2
/home/crimar01/ARM/dev/src/pdsw/linux/scripts/Makefile.build:540: recipe for target 'drivers/firmware' failed
make[2]: *** [drivers/firmware] Error 2
make[2]: *** Waiting for unfinished jobs....
/home/crimar01/ARM/dev/src/pdsw/linux/Makefile:1874: recipe for target 'drivers' failed
make[1]: *** [drivers] Error 2
make[1]: Leaving directory '/home/crimar01/ARM/dev/src/pdsw/out_linux'
Makefile:219: recipe for target '__sub-make' failed
In order to address this issue (same happended with VirtIO) I added
transport_init/transport_exit optional hooks into scmi_desc, so that
you can ask the core SCMI stack to perform whatever your transport
needs at SCMI core init-time, before the SCMI core stack is probed.

In other words the fix here down below fixes for me the build as a
module of the SCMI stack.

Note that also __exit on scmi_optee_exit( )ha sbeen removed to avoid
some complains spotted by Arnd on SCMI VirtIO (1cd73200dad2 firmware:
arm_scmi: Remove __exit annotation)

Thanks,
Cristian

---8<-----------------------
diff --git a/drivers/firmware/arm_scmi/optee.c b/drivers/firmware/arm_scmi/optee.c
index e294cff37bea..af6d52438b04 100644
--- a/drivers/firmware/arm_scmi/optee.c
+++ b/drivers/firmware/arm_scmi/optee.c
@@ -459,13 +459,6 @@ static struct scmi_transport_ops scmi_optee_ops = {
.poll_done = optee_poll_done,
};

-const struct scmi_desc scmi_optee_desc = {
- .ops = &scmi_optee_ops,
- .max_rx_timeout_ms = 30,
- .max_msg = 20,
- .max_msg_size = 128,
-};
-
static int optee_ctx_match(struct tee_ioctl_version_data *ver, const void *data)
{
return ver->impl_id == TEE_IMPL_ID_OPTEE;
@@ -550,10 +543,16 @@ static int __init scmi_optee_init(void)
return driver_register(&scmi_optee_driver.driver);
}

-static void __exit scmi_optee_exit(void)
+static void scmi_optee_exit(void)
{
driver_unregister(&scmi_optee_driver.driver);
}

-device_initcall(scmi_optee_init)
-module_exit(scmi_optee_exit);
+const struct scmi_desc scmi_optee_desc = {
+ .transport_init = scmi_optee_init,
+ .transport_exit = scmi_optee_exit,
+ .ops = &scmi_optee_ops,
+ .max_rx_timeout_ms = 30,
+ .max_msg = 20,
+ .max_msg_size = 128,
+};
> --
> 2.17.1
>

\
 
 \ /
  Last update: 2021-10-18 21:44    [W:0.214 / U:0.272 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site