lkml.org 
[lkml]   [2021]   [Oct]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] dt-bindings: display/bridge: tc358764: Convert to YAML binding
Date
Convert the Toshiba TC358764 txt documentation to YAML.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
Note: dtbs_check on exynos5250-arndale.dts will give some warnings after
applying this patch: since the preferred way is to have 'ports',
this warning was ignored.
I have no Exynos5250 board, so the dts fix is left to someone who
is able to test on the real hw.

.../display/bridge/toshiba,tc358764.txt | 35 -------
.../display/bridge/toshiba,tc358764.yaml | 94 +++++++++++++++++++
2 files changed, 94 insertions(+), 35 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/display/bridge/toshiba,tc358764.txt
create mode 100644 Documentation/devicetree/bindings/display/bridge/toshiba,tc358764.yaml

diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358764.txt b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358764.txt
deleted file mode 100644
index 8f9abf28a8fa..000000000000
--- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358764.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-TC358764 MIPI-DSI to LVDS panel bridge
-
-Required properties:
- - compatible: "toshiba,tc358764"
- - reg: the virtual channel number of a DSI peripheral
- - vddc-supply: core voltage supply, 1.2V
- - vddio-supply: I/O voltage supply, 1.8V or 3.3V
- - vddlvds-supply: LVDS1/2 voltage supply, 3.3V
- - reset-gpios: a GPIO spec for the reset pin
-
-The device node can contain following 'port' child nodes,
-according to the OF graph bindings defined in [1]:
- 0: DSI Input, not required, if the bridge is DSI controlled
- 1: LVDS Output, mandatory
-
-[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
-
-Example:
-
- bridge@0 {
- reg = <0>;
- compatible = "toshiba,tc358764";
- vddc-supply = <&vcc_1v2_reg>;
- vddio-supply = <&vcc_1v8_reg>;
- vddlvds-supply = <&vcc_3v3_reg>;
- reset-gpios = <&gpd1 6 GPIO_ACTIVE_LOW>;
- #address-cells = <1>;
- #size-cells = <0>;
- port@1 {
- reg = <1>;
- lvds_ep: endpoint {
- remote-endpoint = <&panel_ep>;
- };
- };
- };
diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358764.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358764.yaml
new file mode 100644
index 000000000000..815eedb9094f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358764.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/toshiba,tc358764.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toshiba TC358764 MIPI-DSI to LVDS bridge
+
+maintainers:
+ - Andrzej Hajda <a.hajda@samsung.com>
+
+description: |
+ The TC358764 is bridge device which converts MIPI DSI or MIPI DPI to DP/eDP.
+
+properties:
+ compatible:
+ enum:
+ - toshiba,tc358764
+
+ reg:
+ description: Virtual channel number of a DSI peripheral
+ maxItems: 1
+
+ reset-gpios:
+ description: GPIO connected to the reset pin.
+ maxItems: 1
+
+ vddc-supply:
+ description: Core voltage supply, 1.2V
+
+ vddio-supply:
+ description: I/O voltage supply, 1.8V or 3.3V
+
+ vddlvds-supply:
+ description: LVDS1/2 voltage supply, 3.3V
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Video port for MIPI DSI input, if the bridge DSI controlled
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Video port for LVDS output (panel or connector).
+
+ required:
+ - port@1
+
+required:
+ - compatible
+ - reg
+ - vddc-supply
+ - vddio-supply
+ - vddlvds-supply
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bridge@0 {
+ compatible = "toshiba,tc358764";
+ reg = <0>;
+ vddc-supply = <&vcc_1v2_reg>;
+ vddio-supply = <&vcc_1v8_reg>;
+ vddlvds-supply = <&vcc_3v3_reg>;
+ reset-gpios = <&gpd1 6 GPIO_ACTIVE_LOW>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ reg = <1>;
+ lvds_ep: endpoint {
+ remote-endpoint = <&panel_ep>;
+ };
+ };
+ };
+ };
+ };
+
+...
--
2.33.0
\
 
 \ /
  Last update: 2021-10-18 16:40    [W:0.026 / U:0.520 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site