lkml.org 
[lkml]   [2021]   [Oct]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC PATCH v4 02/39] KVM: arm64: Add lock/unlock memslot user API
Hi Suzuki,

On Mon, Oct 18, 2021 at 10:04:37AM +0100, Suzuki K Poulose wrote:
> On 25/08/2021 17:17, Alexandru Elisei wrote:
> > Stage 2 faults triggered by the profiling buffer attempting to write to
> > memory are reported by the SPE hardware by asserting a buffer management
> > event interrupt. Interrupts are by their nature asynchronous, which means
> > that the guest might have changed its stage 1 translation tables since the
> > attempted write. SPE reports the guest virtual address that caused the data
> > abort, not the IPA, which means that KVM would have to walk the guest's
> > stage 1 tables to find the IPA. Using the AT instruction to walk the
> > guest's tables in hardware is not an option because it doesn't report the
> > IPA in the case of a stage 2 fault on a stage 1 table walk.
> >
> > Avoid both issues by pre-mapping the guest memory at stage 2. This is being
> > done by adding a capability that allows the user to pin the memory backing
> > a memslot. The same capability can be used to unlock a memslot, which
> > unpins the pages associated with the memslot, but doesn't unmap the IPA
> > range from stage 2; in this case, the addresses will be unmapped from stage
> > 2 via the MMU notifiers when the process' address space changes.
> >
> > For now, the capability doesn't actually do anything other than checking
> > that the usage is correct; the memory operations will be added in future
> > patches.
> >
> > Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
> > ---
> > Documentation/virt/kvm/api.rst | 56 +++++++++++++++++++++++
> > arch/arm64/include/asm/kvm_mmu.h | 3 ++
> > arch/arm64/kvm/arm.c | 42 ++++++++++++++++--
> > arch/arm64/kvm/mmu.c | 76 ++++++++++++++++++++++++++++++++
> > include/uapi/linux/kvm.h | 8 ++++
> > 5 files changed, 181 insertions(+), 4 deletions(-)
> >
> > diff --git a/Documentation/virt/kvm/api.rst b/Documentation/virt/kvm/api.rst
> > index dae68e68ca23..741327ef06b0 100644
> > --- a/Documentation/virt/kvm/api.rst
> > +++ b/Documentation/virt/kvm/api.rst
> > @@ -6682,6 +6682,62 @@ MAP_SHARED mmap will result in an -EINVAL return.
> > When enabled the VMM may make use of the ``KVM_ARM_MTE_COPY_TAGS`` ioctl to
> > perform a bulk copy of tags to/from the guest.
> > +7.29 KVM_CAP_ARM_LOCK_USER_MEMORY_REGION
> > +----------------------------------------
> > +
> > +:Architectures: arm64
> > +:Target: VM
> > +:Parameters: flags is one of KVM_ARM_LOCK_USER_MEMORY_REGION_FLAGS_LOCK or
> > + KVM_ARM_LOCK_USER_MEMORY_REGION_FLAGS_UNLOCK
> > + args[0] is the slot number
> > + args[1] specifies the permisions when the memslot is locked or if
> > + all memslots should be unlocked
> > +
> > +The presence of this capability indicates that KVM supports locking the memory
> > +associated with the memslot, and unlocking a previously locked memslot.
> > +
> > +The 'flags' parameter is defined as follows:
> > +
> > +7.29.1 KVM_ARM_LOCK_USER_MEMORY_REGION_FLAGS_LOCK
> > +-------------------------------------------------
> > +
> > +:Capability: 'flags' parameter to KVM_CAP_ARM_LOCK_USER_MEMORY_REGION
> > +:Architectures: arm64
> > +:Target: VM
> > +:Parameters: args[0] contains the memory slot number
> > + args[1] contains the permissions for the locked memory:
> > + KVM_ARM_LOCK_MEMORY_READ (mandatory) to map it with
> > + read permissions and KVM_ARM_LOCK_MEMORY_WRITE
> > + (optional) with write permissions
> > +:Returns: 0 on success; negative error code on failure
> > +
> > +Enabling this capability causes the memory described by the memslot to be
> > +pinned in the process address space and the corresponding stage 2 IPA range
> > +mapped at stage 2. The permissions specified in args[1] apply to both
> > +mappings. The memory pinned with this capability counts towards the max
> > +locked memory limit for the current process.
> > +
> > +The capability must be enabled before any VCPUs have run. The virtual memory
> > +range described by the memslot must be mapped in the userspace process without
> > +any gaps. It is considered an error if write permissions are specified for a
> > +memslot which logs dirty pages.
> > +
> > +7.29.2 KVM_ARM_LOCK_USER_MEMORY_REGION_FLAGS_UNLOCK
> > +---------------------------------------------------
> > +
> > +:Capability: 'flags' parameter to KVM_CAP_ARM_LOCK_USER_MEMORY_REGION
> > +:Architectures: arm64
> > +:Target: VM
> > +:Parameters: args[0] contains the memory slot number
> > + args[1] optionally contains the flag KVM_ARM_UNLOCK_MEM_ALL,
> > + which unlocks all previously locked memslots.
> > +:Returns: 0 on success; negative error code on failure
> > +
> > +Enabling this capability causes the memory pinned when locking the memslot
> > +specified in args[0] to be unpinned, or, optionally, the memory associated
> > +with all locked memslots, to be unpinned. The IPA range is not unmapped
> > +from stage 2.
> > +
> > 8. Other capabilities.
> > ======================
> > diff --git a/arch/arm64/include/asm/kvm_mmu.h b/arch/arm64/include/asm/kvm_mmu.h
> > index b52c5c4b9a3d..ef079b5eb475 100644
> > --- a/arch/arm64/include/asm/kvm_mmu.h
> > +++ b/arch/arm64/include/asm/kvm_mmu.h
> > @@ -216,6 +216,9 @@ static inline void __invalidate_icache_guest_page(void *va, size_t size)
> > void kvm_set_way_flush(struct kvm_vcpu *vcpu);
> > void kvm_toggle_cache(struct kvm_vcpu *vcpu, bool was_enabled);
> > +int kvm_mmu_lock_memslot(struct kvm *kvm, u64 slot, u64 flags);
> > +int kvm_mmu_unlock_memslot(struct kvm *kvm, u64 slot, u64 flags);
> > +
> > static inline unsigned int kvm_get_vmid_bits(void)
> > {
> > int reg = read_sanitised_ftr_reg(SYS_ID_AA64MMFR1_EL1);
> > diff --git a/arch/arm64/kvm/arm.c b/arch/arm64/kvm/arm.c
> > index ddace63528f1..57ac97b30b3d 100644
> > --- a/arch/arm64/kvm/arm.c
> > +++ b/arch/arm64/kvm/arm.c
> > @@ -80,16 +80,43 @@ int kvm_arch_check_processor_compat(void *opaque)
> > return 0;
> > }
> > +static int kvm_arm_lock_memslot_supported(void)
> > +{
> > + return 0;
> > +}
> > +
> > +static int kvm_lock_user_memory_region_ioctl(struct kvm *kvm,
> > + struct kvm_enable_cap *cap)
> > +{
> > + u64 slot, flags;
> > + u32 action;
> > +
> > + if (cap->args[2] || cap->args[3])
> > + return -EINVAL;
> > +
> > + slot = cap->args[0];
> > + flags = cap->args[1];
>
> nit: ^^ Please could we rename "flags" => "perm" (ission) ?
>
> > + action = cap->flags;
>
> We already have cap->flags, and using arg[1] as flags ( which indeed
> is permission by definition) is confusing.

Yes, that's a good idea, will do.

Thanks,
Alex
>
> Suzuki

\
 
 \ /
  Last update: 2021-10-18 16:09    [W:0.121 / U:0.252 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site