lkml.org 
[lkml]   [2021]   [Oct]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Subject[PATCH v3 0/3] phy: stm32: add phy tuning support
    Date
    This series brings phy tuning to stm32-usbphyc with new optional
    device tree properties.
    A prior patch add resume routine, which is used to restore UTMI
    switch and phy tuning configuration, as they can be reset if
    deep low power state is achieved.

    Amelie Delaunay (3):
    phy: stm32: restore utmi switch on resume
    dt-bindings: phy: phy-stm32-usbphyc: add optional phy tuning
    properties
    phy: stm32: add phy tuning support

    ---
    Changes in v3:
    - Use -microamp for current boost
    - '|' added after 'description:' on each properties needing this
    Changes in v2:
    - st,phy-tuning + usb_phy_tuning node removed
    - properties are now in phy child nodes

    .../bindings/phy/phy-stm32-usbphyc.yaml | 129 +++++++++++
    drivers/phy/st/phy-stm32-usbphyc.c | 203 ++++++++++++++++++
    2 files changed, 332 insertions(+)

    --
    2.25.1

    \
     
     \ /
      Last update: 2021-10-15 18:15    [W:2.889 / U:0.788 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site