lkml.org 
[lkml]   [2021]   [Oct]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 06/11] drm/msm/disp/dpu1: Don't use DSC with mode_3d
From
Date
On 07/10/2021 10:08, Vinod Koul wrote:
> We cannot enable mode_3d when we are using the DSC. So pass
> configuration to detect DSC is enabled and not enable mode_3d
> when we are using DSC
>
> We add a helper dpu_encoder_helper_get_dsc_mode() to detect dsc
> enabled and pass this to .setup_intf_cfg()
>
> Signed-off-by: Vinod Koul <vkoul@kernel.org>
> ---
> Changes since
> v1:
> - Move this patch from 7 to 6
> - Update the changelog
> - Make dsc as int and store the DSC indices
>
> drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h | 11 +++++++++++
> drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c | 2 ++
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c | 5 +++--
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h | 2 ++
> 4 files changed, 18 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
> index e7270eb6b84b..fca07ed03317 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
> @@ -332,6 +332,17 @@ static inline enum dpu_3d_blend_mode dpu_encoder_helper_get_3d_blend_mode(
> return BLEND_3D_NONE;
> }
>
> +static inline bool dpu_encoder_helper_get_dsc_mode(struct dpu_encoder_phys *phys_enc)
> +{
> + struct drm_encoder *drm_enc = phys_enc->parent;
> + struct msm_drm_private *priv = drm_enc->dev->dev_private;
> +
> + if (priv->dsc)
> + return BIT(0) | BIT(1); /* Hardcoding for 2 DSC topology */

Please use defined values here rater than just BIT().

> +
> + return 0;
> +}
> +
> /**
> * dpu_encoder_helper_split_config - split display configuration helper function
> * This helper function may be used by physical encoders to configure
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
> index aa01698d6b25..8e5c0911734c 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
> @@ -70,6 +70,8 @@ static void _dpu_encoder_phys_cmd_update_intf_cfg(
> intf_cfg.intf_mode_sel = DPU_CTL_MODE_SEL_CMD;
> intf_cfg.stream_sel = cmd_enc->stream_sel;
> intf_cfg.mode_3d = dpu_encoder_helper_get_3d_blend_mode(phys_enc);
> + intf_cfg.dsc = dpu_encoder_helper_get_dsc_mode(phys_enc);
> +
> ctl->ops.setup_intf_cfg(ctl, &intf_cfg);
> }
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> index 64740ddb983e..3c79bd9c2fe5 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> @@ -118,7 +118,7 @@ static u32 dpu_hw_ctl_get_pending_flush(struct dpu_hw_ctl *ctx)
> return ctx->pending_flush_mask;
> }
>
> -static inline void dpu_hw_ctl_trigger_flush_v1(struct dpu_hw_ctl *ctx)
> +static void dpu_hw_ctl_trigger_flush_v1(struct dpu_hw_ctl *ctx)
> {
>
> if (ctx->pending_flush_mask & BIT(MERGE_3D_IDX))
> @@ -519,7 +519,8 @@ static void dpu_hw_ctl_intf_cfg(struct dpu_hw_ctl *ctx,
>
> intf_cfg |= (cfg->intf & 0xF) << 4;
>
> - if (cfg->mode_3d) {
> + /* In DSC we can't set merge, so check for dsc too */
> + if (cfg->mode_3d && !cfg->dsc) {

The more I think about this hunk, the more I'm unsure about it.
Downstream has the following topoligies defined:
* @SDE_RM_TOPOLOGY_DUALPIPE_3DMERGE_DSC: 2 LM, 2 PP, 3DMux, 1 DSC, 1
INTF/WB
* @SDE_RM_TOPOLOGY_QUADPIPE_3DMERGE_DSC 4 LM, 4 PP, 3DMux, 3 DSC, 2 INTF

While the latter is not supported on sdm845, the former one should be
(by the hardware). So in the driver I think we should make sure that
mode_3d does not get set rather than disallowing it here.

> intf_cfg |= BIT(19);
> intf_cfg |= (cfg->mode_3d - 0x1) << 20;
> }
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h
> index 806c171e5df2..5dfac5994bd4 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h
> @@ -39,6 +39,7 @@ struct dpu_hw_stage_cfg {
> * @mode_3d: 3d mux configuration
> * @merge_3d: 3d merge block used
> * @intf_mode_sel: Interface mode, cmd / vid
> + * @dsc: DSC BIT masks
> * @stream_sel: Stream selection for multi-stream interfaces
> */
> struct dpu_hw_intf_cfg {
> @@ -46,6 +47,7 @@ struct dpu_hw_intf_cfg {
> enum dpu_3d_blend_mode mode_3d;
> enum dpu_merge_3d merge_3d;
> enum dpu_ctl_mode_sel intf_mode_sel;
> + unsigned int dsc;
> int stream_sel;
> };
>
>


--
With best wishes
Dmitry

\
 
 \ /
  Last update: 2021-10-14 15:42    [W:0.242 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site