lkml.org 
[lkml]   [2021]   [Oct]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 2/4] thermal/drivers/qcom/spmi-adc-tm5: Add support for HC variant
From
Date
On 05/10/2021 06:25, Bjorn Andersson wrote:
> The variant of the ADC Thermal Monitor block found in e.g. PM8998 is
> "HC", add support for this variant to the ADC TM5 driver in order to
> support using VADC channels as thermal_zones on SDM845 et al.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

> ---
>
> Changes since v2:
> - Dropped conditional return ret right before unconditionatl return ret;
>
> drivers/thermal/qcom/qcom-spmi-adc-tm5.c | 41 +++++++++++++++++++++++-
> 1 file changed, 40 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/thermal/qcom/qcom-spmi-adc-tm5.c b/drivers/thermal/qcom/qcom-spmi-adc-tm5.c
> index 8494cc04aa21..824671cf494a 100644
> --- a/drivers/thermal/qcom/qcom-spmi-adc-tm5.c
> +++ b/drivers/thermal/qcom/qcom-spmi-adc-tm5.c
> @@ -82,6 +82,7 @@ struct adc_tm5_data {
> const u32 full_scale_code_volt;
> unsigned int *decimation;
> unsigned int *hw_settle;
> + bool is_hc;
> };
>
> enum adc_tm5_cal_method {
> @@ -146,6 +147,14 @@ static const struct adc_tm5_data adc_tm5_data_pmic = {
> 64000, 128000 },
> };
>
> +static const struct adc_tm5_data adc_tm_hc_data_pmic = {
> + .full_scale_code_volt = 0x70e4,
> + .decimation = (unsigned int []) { 256, 512, 1024 },
> + .hw_settle = (unsigned int []) { 0, 100, 200, 300, 400, 500, 600, 700,
> + 1000, 2000, 4000, 6000, 8000, 10000 },
> + .is_hc = true,
> +};
> +
> static int adc_tm5_read(struct adc_tm5_chip *adc_tm, u16 offset, u8 *data, int len)
> {
> return regmap_bulk_read(adc_tm->regmap, adc_tm->base + offset, data, len);
> @@ -375,6 +384,29 @@ static int adc_tm5_register_tzd(struct adc_tm5_chip *adc_tm)
> return 0;
> }
>
> +static int adc_tm_hc_init(struct adc_tm5_chip *chip)
> +{
> + unsigned int i;
> + u8 buf[2];
> + int ret;
> +
> + for (i = 0; i < chip->nchannels; i++) {
> + if (chip->channels[i].channel >= ADC_TM5_NUM_CHANNELS) {
> + dev_err(chip->dev, "Invalid channel %d\n", chip->channels[i].channel);
> + return -EINVAL;
> + }
> + }
> +
> + buf[0] = chip->decimation;
> + buf[1] = chip->avg_samples | ADC_TM5_FAST_AVG_EN;
> +
> + ret = adc_tm5_write(chip, ADC_TM5_ADC_DIG_PARAM, buf, sizeof(buf));
> + if (ret)
> + dev_err(chip->dev, "block write failed: %d\n", ret);
> +
> + return ret;
> +}
> +
> static int adc_tm5_init(struct adc_tm5_chip *chip)
> {
> u8 buf[4], channels_available;
> @@ -591,7 +623,10 @@ static int adc_tm5_probe(struct platform_device *pdev)
> return ret;
> }
>
> - ret = adc_tm5_init(adc_tm);
> + if (adc_tm->data->is_hc)
> + ret = adc_tm_hc_init(adc_tm);
> + else
> + ret = adc_tm5_init(adc_tm);
> if (ret) {
> dev_err(dev, "adc-tm init failed\n");
> return ret;
> @@ -612,6 +647,10 @@ static const struct of_device_id adc_tm5_match_table[] = {
> .compatible = "qcom,spmi-adc-tm5",
> .data = &adc_tm5_data_pmic,
> },
> + {
> + .compatible = "qcom,spmi-adc-tm-hc",
> + .data = &adc_tm_hc_data_pmic,
> + },
> { }
> };
> MODULE_DEVICE_TABLE(of, adc_tm5_match_table);
>


--
With best wishes
Dmitry

\
 
 \ /
  Last update: 2021-10-15 02:21    [W:0.096 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site