lkml.org 
[lkml]   [2021]   [Oct]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v5 0/4] iio: chemical: Add support for Sensirion SCD4x CO2 sensor
On Sun, 10 Oct 2021 16:59:19 +0100
Jonathan Cameron <jic23@kernel.org> wrote:

> On Fri, 8 Oct 2021 12:17:02 +0200
> Roan van Dijk <roan@protonic.nl> wrote:
>
> > This series adds support for the Sensirion SCD4x sensor.
> >
> > The driver supports continuous reads of temperature, relative humdity and CO2
> > concentration. There is an interval of 5 seconds between readings. During
> > this interval the drivers checks if the sensor has new data available.
> >
> > The driver is based on the scd30 driver. However, The scd4x has become too
> > different to just expand the scd30 driver. I made a new driver instead of
> > expanding the scd30 driver. I hope I made the right choice by doing so?
>
> Applied to the togreg branch of iio.git with the issues Randy mentioned tidied
> up. Pushed out as testing for 0-day to see if it can find anything we missed

And indeed - I missed a bunch of places where explicit __be16 types should have
been used.

I've applied the following fixup, shout if it's wrong.


diff --git a/drivers/iio/chemical/scd4x.c b/drivers/iio/chemical/scd4x.c
index 09b34201c42b..ebebcb117ba2 100644
--- a/drivers/iio/chemical/scd4x.c
+++ b/drivers/iio/chemical/scd4x.c
@@ -263,7 +263,7 @@ static int scd4x_write_and_fetch(struct scd4x_state *state, enum scd4x_cmd cmd,
static int scd4x_read_meas(struct scd4x_state *state, uint16_t *meas)
{
int i, ret;
- uint16_t buf[3];
+ __be16 buf[3];

ret = scd4x_read(state, CMD_READ_MEAS, buf, sizeof(buf));
if (ret)
@@ -282,12 +282,13 @@ static int scd4x_wait_meas_poll(struct scd4x_state *state)
int ret;

do {
+ __be16 bval;
uint16_t val;

- ret = scd4x_read(state, CMD_GET_DATA_READY, &val, sizeof(val));
+ ret = scd4x_read(state, CMD_GET_DATA_READY, &bval, sizeof(bval));
if (ret)
return -EIO;
- val = be16_to_cpu(val);
+ val = be16_to_cpu(bval);

/* new measurement available */
if (val & 0x7FF)
@@ -333,7 +334,7 @@ static int scd4x_read_raw(struct iio_dev *indio_dev,
{
struct scd4x_state *state = iio_priv(indio_dev);
int ret;
- uint16_t tmp;
+ __be16 tmp;

switch (mask) {
case IIO_CHAN_INFO_RAW:
@@ -405,17 +406,18 @@ static ssize_t calibration_auto_enable_show(struct device *dev,
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
struct scd4x_state *state = iio_priv(indio_dev);
int ret;
- uint16_t val;
+ __be16 bval;
+ u16 val;

mutex_lock(&state->lock);
- ret = scd4x_read(state, CMD_GET_ASC, &val, sizeof(val));
+ ret = scd4x_read(state, CMD_GET_ASC, &bval, sizeof(bval));
mutex_unlock(&state->lock);
if (ret) {
dev_err(dev, "failed to read automatic calibration");
return ret;
}

- val = (be16_to_cpu(val) & SCD4X_READY_MASK) ? 1 : 0;
+ val = (be16_to_cpu(bval) & SCD4X_READY_MASK) ? 1 : 0;

return sprintf(buf, "%d\n", val);
}

>
> Thanks,
>
> Jonathan
>
> >
> > Changes since v5:
> > scd4x.c:
> > - Fix bug in trigger_handler
> >
> > Changes since v4:
> > scd4x.c:
> > - Minor fixes in documentation
> > - Reorder trigger_handler so memcpy is not needed anymore
> > Documentation:
> > - Change information about the KernelVersion for the
> > calibration_forced_value_available
> >
> > Changes since v3:
> > scd4x.c
> > - Change read and write_and_fetch function parameter. CRC byte is now
> > hidden inside the function.
> > - Fix minor style issues
> > - Add calibration_forced_value_available attribute to the driver
> > - Remove including BUFFER_TRIGGERED
> > - Change calibbias to raw ADC readings rather than converting it to
> > milli degrees C.
> > Documentation:
> > - Change description of driver attributes
> > - Add calibration_forced_value_available documentation
> >
> > Changes since v2:
> > scd4x.c:
> > - Change boolean operations
> > - Document scope of lock
> > - Remove device *dev from struct
> > - Add goto block for errror handling
> > - Add function to read value per channel in read_raw
> > - Fix bug with lock in error paths
> > - Remove conversion of humidity and temperature values
> > - Add scale and offset to temperature channel
> > - Add scale to humidity channel
> > - Move memset out of locked section
> > - Remove unused irq functions
> > - Move device register at end of probe function
> > Documentation:
> > - Copy content of sysfs-bus-iio-scd30 to sysfs-bus-iio
> > - Remove Documentation/ABI/testing/sysfs-bus-iio-scd30
> >
> > Changes since v1:
> > dt-bindings:
> > - Separated compatible string for each sensor type
> > scd4x.c:
> > - Changed probe, resume and suspend functions to static
> > - Added SIMPLE_DEV_PM_OPS function call for power management
> > operations.
> >
> > Roan van Dijk (4):
> > dt-bindings: iio: chemical: sensirion,scd4x: Add yaml description
> > MAINTAINERS: Add myself as maintainer of the scd4x driver
> > drivers: iio: chemical: Add support for Sensirion SCD4x CO2 sensor
> > iio: documentation: Document scd4x calibration use
> >
> > Documentation/ABI/testing/sysfs-bus-iio | 41 ++
> > Documentation/ABI/testing/sysfs-bus-iio-scd30 | 34 -
> > .../iio/chemical/sensirion,scd4x.yaml | 46 ++
> > MAINTAINERS | 6 +
> > drivers/iio/chemical/Kconfig | 13 +
> > drivers/iio/chemical/Makefile | 1 +
> > drivers/iio/chemical/scd4x.c | 689 ++++++++++++++++++
> > 7 files changed, 796 insertions(+), 34 deletions(-)
> > delete mode 100644 Documentation/ABI/testing/sysfs-bus-iio-scd30
> > create mode 100644 Documentation/devicetree/bindings/iio/chemical/sensirion,scd4x.yaml
> > create mode 100644 drivers/iio/chemical/scd4x.c
> >
>

\
 
 \ /
  Last update: 2021-10-13 19:35    [W:0.067 / U:0.844 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site