lkml.org 
[lkml]   [2021]   [Oct]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] dt-bindings: pinctrl: uniphier: Add child node definitions to describe pin mux and configuration
Date
In arch/arm/boot/dts/uniphier-pinctrl.dtsi, there are child nodes of
pinctrl that defines pinmux and pincfg, however, there are no rules about
that in dt-bindings.

'make dtbs_check' results an error with the following message:

pinctrl: 'ain1', 'ain2', 'ainiec1', 'aout', 'aout1', 'aout2', ...
... 'usb2', 'usb3' do not match any of the regexes: 'pinctrl-[0-9]+'

To avoid this issue, add the rules of pinmux and pincfg in each child node
and grandchild node.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
---
.../pinctrl/socionext,uniphier-pinctrl.yaml | 46 +++++++++++++++++++++-
1 file changed, 44 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml
index a804d9bc1602..4567330fe536 100644
--- a/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml
@@ -26,11 +26,53 @@ properties:
- socionext,uniphier-pxs3-pinctrl
- socionext,uniphier-nx1-pinctrl

-required:
- - compatible
+patternProperties:
+ "^.*$":
+ if:
+ type: object
+ then:
+ allOf:
+ - $ref: pincfg-node.yaml#
+ - $ref: pinmux-node.yaml#
+
+ properties:
+ phandle: true
+ function: true
+ groups: true
+ pins: true
+ bias-pull-up: true
+ bias-pull-down: true
+ bias-pull-pin-default: true
+ drive-strength: true
+
+ patternProperties:
+ "^.*$":
+ if:
+ type: object
+ then:
+ allOf:
+ - $ref: pincfg-node.yaml#
+ - $ref: pinmux-node.yaml#
+
+ properties:
+ phandle: true
+ function: true
+ groups: true
+ pins: true
+ bias-pull-up: true
+ bias-pull-down: true
+ bias-pull-pin-default: true
+ drive-strength: true
+
+ unevaluatedProperties: false
+
+ unevaluatedProperties: false

additionalProperties: false

+required:
+ - compatible
+
examples:
- |
// The UniPhier pinctrl should be a subnode of a "syscon" compatible node.
--
2.7.4
\
 
 \ /
  Last update: 2021-10-13 16:54    [W:0.048 / U:1.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site