lkml.org 
[lkml]   [2021]   [Oct]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 04/20] dt-bindings: qcom-bam: Convert binding to YAML
Date
Convert Qualcomm BAM DMA devicetree binding to YAML.

Cc: Thara Gopinath <thara.gopinath@linaro.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
---
.../devicetree/bindings/dma/qcom_bam_dma.txt | 50 -----------
.../devicetree/bindings/dma/qcom_bam_dma.yaml | 89 +++++++++++++++++++
2 files changed, 89 insertions(+), 50 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/dma/qcom_bam_dma.txt
create mode 100644 Documentation/devicetree/bindings/dma/qcom_bam_dma.yaml

diff --git a/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt b/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt
deleted file mode 100644
index cf5b9e44432c..000000000000
--- a/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-QCOM BAM DMA controller
-
-Required properties:
-- compatible: must be one of the following:
- * "qcom,bam-v1.4.0" for MSM8974, APQ8074 and APQ8084
- * "qcom,bam-v1.3.0" for APQ8064, IPQ8064 and MSM8960
- * "qcom,bam-v1.7.0" for MSM8916
-- reg: Address range for DMA registers
-- interrupts: Should contain the one interrupt shared by all channels
-- #dma-cells: must be <1>, the cell in the dmas property of the client device
- represents the channel number
-- clocks: required clock
-- clock-names: must contain "bam_clk" entry
-- qcom,ee : indicates the active Execution Environment identifier (0-7) used in
- the secure world.
-- qcom,controlled-remotely : optional, indicates that the bam is controlled by
- remote proccessor i.e. execution environment.
-- num-channels : optional, indicates supported number of DMA channels in a
- remotely controlled bam.
-- qcom,num-ees : optional, indicates supported number of Execution Environments
- in a remotely controlled bam.
-
-Example:
-
- uart-bam: dma@f9984000 = {
- compatible = "qcom,bam-v1.4.0";
- reg = <0xf9984000 0x15000>;
- interrupts = <0 94 0>;
- clocks = <&gcc GCC_BAM_DMA_AHB_CLK>;
- clock-names = "bam_clk";
- #dma-cells = <1>;
- qcom,ee = <0>;
- };
-
-DMA clients must use the format described in the dma.txt file, using a two cell
-specifier for each channel.
-
-Example:
- serial@f991e000 {
- compatible = "qcom,msm-uart";
- reg = <0xf991e000 0x1000>
- <0xf9944000 0x19000>;
- interrupts = <0 108 0>;
- clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
- <&gcc GCC_BLSP1_AHB_CLK>;
- clock-names = "core", "iface";
-
- dmas = <&uart-bam 0>, <&uart-bam 1>;
- dma-names = "rx", "tx";
- };
diff --git a/Documentation/devicetree/bindings/dma/qcom_bam_dma.yaml b/Documentation/devicetree/bindings/dma/qcom_bam_dma.yaml
new file mode 100644
index 000000000000..32b47e3b7769
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/qcom_bam_dma.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/qcom_bam_dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: QCOM BAM DMA controller binding
+
+maintainers:
+ - Bhupesh Sharma <bhupesh.sharma@linaro.org>
+
+description: |
+ This document defines the binding for the BAM DMA controller
+ found on Qualcomm parts.
+
+allOf:
+ - $ref: "dma-controller.yaml#"
+
+properties:
+ compatible:
+ enum:
+ - qcom,bam-v1.4.0 # for MSM8974, APQ8074 and APQ8084
+ - qcom,bam-v1.3.0 # for APQ8064, IPQ8064 and MSM8960
+ - qcom,bam-v1.7.0 # for MSM8916
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: bam_clk
+
+ interrupts:
+ minItems: 1
+ maxItems: 31
+
+ num-channels:
+ maximum: 31
+ description: |
+ Indicates supported number of DMA channels in a remotely controlled bam.
+
+ "#dma-cells":
+ const: 1
+ description: The single cell represents the channel index.
+
+ qcom,ee:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Indicates the active Execution Environment identifier (0-7)
+ used in the secure world.
+
+ qcom,controlled-remotely:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Indicates that the bam is controlled by remote proccessor i.e.
+ execution environment.
+
+ qcom,num-ees:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 31
+ default: 2
+ description:
+ Indicates supported number of Execution Environments in a
+ remotely controlled bam.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - "#dma-cells"
+ - qcom,ee
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,gcc-msm8974.h>
+ dma-controller@f9984000 {
+ compatible = "qcom,bam-v1.4.0";
+ reg = <0xf9984000 0x15000>;
+ interrupts = <0 94 0>;
+ clocks = <&gcc GCC_BAM_DMA_AHB_CLK>;
+ clock-names = "bam_clk";
+ #dma-cells = <1>;
+ qcom,ee = <0>;
+ };
--
2.31.1
\
 
 \ /
  Last update: 2021-10-13 12:56    [W:0.282 / U:0.312 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site