lkml.org 
[lkml]   [2021]   [Oct]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH net-next 5/6] net: dsa: realtek-smi: add rtl8365mb subdriver for RTL8365MB-VC
Date
On Wed, Oct 13, 2021 at 10:05:21AM +0000, Alvin Šipraga wrote:
> Andrew also suggested this, but the discontinuity in port IDs seems to
> be an invitation for trouble. Here is an example of a series of
> functions from dsa.h:
>
> static inline struct dsa_port *dsa_to_port(struct dsa_switch *ds, int p)
> {
> struct dsa_switch_tree *dst = ds->dst;
> struct dsa_port *dp;
>
> list_for_each_entry(dp, &dst->ports, list)
> if (dp->ds == ds && dp->index == p)
> return dp;
>
> return NULL;
> }
>
> static inline bool dsa_is_user_port(struct dsa_switch *ds, int p)
> {
> return dsa_to_port(ds, p)->type == DSA_PORT_TYPE_USER;
> }
>
> static inline u32 dsa_user_ports(struct dsa_switch *ds)
> {
> u32 mask = 0;
> int p;
>
> for (p = 0; p < ds->num_ports; p++)
> if (dsa_is_user_port(ds, p))
> mask |= BIT(p);
>
> return mask;
> }
>
> My reading of dsa_user_ports() is that the port IDs run from 0 to
> (ds->num_ports - 1). If num_ports is 5 (4 user ports and 1 CPU port, as
> in my case), but the CPU is port 6, will we not dereference NULL when
> calling dsa_is_user_port(ds, 4)?

So set num_ports to 7.

>
> >
> >> +
> >> +/* Chip-specific data and limits */
>

\
 
 \ /
  Last update: 2021-10-13 12:14    [W:0.065 / U:0.308 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site