lkml.org 
[lkml]   [2021]   [Oct]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v7 20/21] auxdisplay: ht16k33: Add LED support
Reviewed-by: Robin van der Gracht <robin@protonic.nl>

On 2021-10-12 20:33, Geert Uytterhoeven wrote:
> Instantiate a single LED based on the "led" subnode in DT.
> This allows the user to control display brightness and blinking (backed
> by hardware support) through the LED class API and triggers, and exposes
> the display color. The LED will be named
> "auxdisplay:<color>:<function>".
>
> When running in dot-matrix mode and if no "led" subnode is found, the
> driver falls back to the traditional backlight mode, to preserve
> backwards compatibility.
>
> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
> Reviewed-by: Marek Behún <kabel@kernel.org>
> ---
> v7:
> - Add missing call to ht16k33_brightness_set() in
> ht16k33_fbdev_probe(), to make sure brightness and blinking are set
> to a sane state,
>
> v6:
> - Add Reviewed-by,
> - Reorder operations in ht16k33_led_probe() to simplify future
> conversion to device properties,
>
> v5:
> - Add missing select NEW_LEDS,
>
> v4:
> - Add missing select LEDS_CLASS,
>
> v3:
> - Remove unneeded C++ comment,
> - Use "err" instead of "error" to be consistent with existing driver
> naming style,
> - Make the creation of the LED device dependent on the presence of the
> "led" subnode in DT, so it can be used in dot-matrix mode too.
> - Use led_init_data() and devm_led_classdev_register_ext() to retrieve
> all LED properties from DT, instead of manual LED name construction
> based on just the "color" property,
>
> v2:
> - Use "auxdisplay" instead of DRIVER_NAME in LED name.
> ---
> drivers/auxdisplay/Kconfig | 2 +
> drivers/auxdisplay/ht16k33.c | 126 ++++++++++++++++++++++++++++++-----
> 2 files changed, 112 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/auxdisplay/Kconfig b/drivers/auxdisplay/Kconfig
> index 42fc7b155de09dbc..e32ef7f9945d49b2 100644
> --- a/drivers/auxdisplay/Kconfig
> +++ b/drivers/auxdisplay/Kconfig
> @@ -176,6 +176,8 @@ config HT16K33
> select FB_SYS_IMAGEBLIT
> select INPUT_MATRIXKMAP
> select FB_BACKLIGHT
> + select NEW_LEDS
> + select LEDS_CLASS
> select LINEDISP
> help
> Say yes here to add support for Holtek HT16K33, RAM mapping 16*8
> diff --git a/drivers/auxdisplay/ht16k33.c b/drivers/auxdisplay/ht16k33.c
> index 9ce9271d5e3d0b31..aef3dc87dc9f5ed2 100644
> --- a/drivers/auxdisplay/ht16k33.c
> +++ b/drivers/auxdisplay/ht16k33.c
> @@ -18,6 +18,7 @@
> #include <linux/backlight.h>
> #include <linux/input.h>
> #include <linux/input/matrix_keypad.h>
> +#include <linux/leds.h>
> #include <linux/workqueue.h>
> #include <linux/mm.h>
>
> @@ -34,6 +35,10 @@
>
> #define REG_DISPLAY_SETUP 0x80
> #define REG_DISPLAY_SETUP_ON BIT(0)
> +#define REG_DISPLAY_SETUP_BLINK_OFF (0 << 1)
> +#define REG_DISPLAY_SETUP_BLINK_2HZ (1 << 1)
> +#define REG_DISPLAY_SETUP_BLINK_1HZ (2 << 1)
> +#define REG_DISPLAY_SETUP_BLINK_0HZ5 (3 << 1)
>
> #define REG_ROWINT_SET 0xA0
> #define REG_ROWINT_SET_INT_EN BIT(0)
> @@ -94,12 +99,14 @@ struct ht16k33_seg {
> struct ht16k33_priv {
> struct i2c_client *client;
> struct delayed_work work;
> + struct led_classdev led;
> struct ht16k33_keypad keypad;
> union {
> struct ht16k33_fbdev fbdev;
> struct ht16k33_seg seg;
> };
> enum display_type type;
> + uint8_t blink;
> };
>
> static const struct fb_fix_screeninfo ht16k33_fb_fix = {
> @@ -158,7 +165,7 @@ static DEVICE_ATTR(map_seg14, 0644, map_seg_show,
> map_seg_store);
>
> static int ht16k33_display_on(struct ht16k33_priv *priv)
> {
> - uint8_t data = REG_DISPLAY_SETUP | REG_DISPLAY_SETUP_ON;
> + uint8_t data = REG_DISPLAY_SETUP | REG_DISPLAY_SETUP_ON | priv->blink;
>
> return i2c_smbus_write_byte(priv->client, data);
> }
> @@ -173,8 +180,10 @@ static int ht16k33_brightness_set(struct ht16k33_priv
> *priv,
> {
> int err;
>
> - if (brightness == 0)
> + if (brightness == 0) {
> + priv->blink = REG_DISPLAY_SETUP_BLINK_OFF;
> return ht16k33_display_off(priv);
> + }
>
> err = ht16k33_display_on(priv);
> if (err)
> @@ -184,6 +193,49 @@ static int ht16k33_brightness_set(struct ht16k33_priv
> *priv,
> REG_BRIGHTNESS | (brightness - 1));
> }
>
> +static int ht16k33_brightness_set_blocking(struct led_classdev *led_cdev,
> + enum led_brightness brightness)
> +{
> + struct ht16k33_priv *priv = container_of(led_cdev, struct ht16k33_priv,
> + led);
> +
> + return ht16k33_brightness_set(priv, brightness);
> +}
> +
> +static int ht16k33_blink_set(struct led_classdev *led_cdev,
> + unsigned long *delay_on, unsigned long *delay_off)
> +{
> + struct ht16k33_priv *priv = container_of(led_cdev, struct ht16k33_priv,
> + led);
> + unsigned int delay;
> + uint8_t blink;
> + int err;
> +
> + if (!*delay_on && !*delay_off) {
> + blink = REG_DISPLAY_SETUP_BLINK_1HZ;
> + delay = 1000;
> + } else if (*delay_on <= 750) {
> + blink = REG_DISPLAY_SETUP_BLINK_2HZ;
> + delay = 500;
> + } else if (*delay_on <= 1500) {
> + blink = REG_DISPLAY_SETUP_BLINK_1HZ;
> + delay = 1000;
> + } else {
> + blink = REG_DISPLAY_SETUP_BLINK_0HZ5;
> + delay = 2000;
> + }
> +
> + err = i2c_smbus_write_byte(priv->client,
> + REG_DISPLAY_SETUP | REG_DISPLAY_SETUP_ON |
> + blink);
> + if (err)
> + return err;
> +
> + priv->blink = blink;
> + *delay_on = *delay_off = delay;
> + return 0;
> +}
> +
> static void ht16k33_fb_queue(struct ht16k33_priv *priv)
> {
> struct ht16k33_fbdev *fbdev = &priv->fbdev;
> @@ -435,6 +487,35 @@ static void ht16k33_seg14_update(struct work_struct
> *work)
> i2c_smbus_write_i2c_block_data(priv->client, 0, ARRAY_SIZE(buf), buf);
> }
>
> +static int ht16k33_led_probe(struct device *dev, struct led_classdev *led,
> + unsigned int brightness)
> +{
> + struct led_init_data init_data = {};
> + struct device_node *node;
> + int err;
> +
> + /* The LED is optional */
> + node = of_get_child_by_name(dev->of_node, "led");
> + if (!node)
> + return 0;
> +
> + init_data.fwnode = of_fwnode_handle(node);
> + init_data.devicename = "auxdisplay";
> + init_data.devname_mandatory = true;
> +
> + led->brightness_set_blocking = ht16k33_brightness_set_blocking;
> + led->blink_set = ht16k33_blink_set;
> + led->flags = LED_CORE_SUSPENDRESUME;
> + led->brightness = brightness;
> + led->max_brightness = MAX_BRIGHTNESS;
> +
> + err = devm_led_classdev_register_ext(dev, led, &init_data);
> + if (err)
> + dev_err(dev, "Failed to register LED\n");
> +
> + return err;
> +}
> +
> static int ht16k33_keypad_probe(struct i2c_client *client,
> struct ht16k33_keypad *keypad)
> {
> @@ -508,25 +589,33 @@ static int ht16k33_fbdev_probe(struct device *dev,
> struct ht16k33_priv *priv,
> uint32_t brightness)
> {
> struct ht16k33_fbdev *fbdev = &priv->fbdev;
> - struct backlight_properties bl_props;
> - struct backlight_device *bl;
> + struct backlight_device *bl = NULL;
> int err;
>
> - /* Backlight */
> - memset(&bl_props, 0, sizeof(struct backlight_properties));
> - bl_props.type = BACKLIGHT_RAW;
> - bl_props.max_brightness = MAX_BRIGHTNESS;
> + if (priv->led.dev) {
> + err = ht16k33_brightness_set(priv, brightness);
> + if (err)
> + return err;
> + } else {
> + /* backwards compatibility with DT lacking an led subnode */
> + struct backlight_properties bl_props;
> +
> + memset(&bl_props, 0, sizeof(struct backlight_properties));
> + bl_props.type = BACKLIGHT_RAW;
> + bl_props.max_brightness = MAX_BRIGHTNESS;
> +
> + bl = devm_backlight_device_register(dev, DRIVER_NAME"-bl", dev,
> + priv, &ht16k33_bl_ops,
> + &bl_props);
> + if (IS_ERR(bl)) {
> + dev_err(dev, "failed to register backlight\n");
> + return PTR_ERR(bl);
> + }
>
> - bl = devm_backlight_device_register(dev, DRIVER_NAME"-bl", dev, priv,
> - &ht16k33_bl_ops, &bl_props);
> - if (IS_ERR(bl)) {
> - dev_err(dev, "failed to register backlight\n");
> - return PTR_ERR(bl);
> + bl->props.brightness = brightness;
> + ht16k33_bl_update_status(bl);
> }
>
> - bl->props.brightness = brightness;
> - ht16k33_bl_update_status(bl);
> -
> /* Framebuffer (2 bytes per column) */
> BUILD_BUG_ON(PAGE_SIZE < HT16K33_FB_SIZE);
> fbdev->buffer = (unsigned char *) get_zeroed_page(GFP_KERNEL);
> @@ -663,6 +752,11 @@ static int ht16k33_probe(struct i2c_client *client)
> dft_brightness = MAX_BRIGHTNESS;
> }
>
> + /* LED */
> + err = ht16k33_led_probe(dev, &priv->led, dft_brightness);
> + if (err)
> + return err;
> +
> /* Keypad */
> if (client->irq > 0) {
> err = ht16k33_keypad_probe(client, &priv->keypad);

Met vriendelijke groet,
Robin van der Gracht

--
Protonic Holland
Factorij 36
1689AL Zwaag
+31 (0)229 212928
https://www.protonic.nl

\
 
 \ /
  Last update: 2021-10-13 09:28    [W:0.099 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site