lkml.org 
[lkml]   [2021]   [Oct]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] drm/bridge: Ignore -EPROBE_DEFER when bridge attach fails
Hi Laurent,
On Tue, Oct 12, 2021 at 11:17:07PM +0300, Laurent Pinchart wrote:
> Hi Guido,
>
> Thank you for the patch.
>
> On Tue, Oct 12, 2021 at 09:58:58PM +0200, Guido Günther wrote:
> > Otherwise logs are filled with
> >
> > [drm:drm_bridge_attach] *ERROR* failed to attach bridge /soc@0/bus@30800000/mipi-dsi@30a0 0000 to encoder None-34: -517
> >
> > when the bridge isn't ready yet.
> >
> > Fixes: fb8d617f8fd6 ("drm/bridge: Centralize error message when bridge attach fails")
> > Signed-off-by: Guido Günther <agx@sigxcpu.org>
> > ---
> > drivers/gpu/drm/drm_bridge.c | 11 ++++++-----
> > 1 file changed, 6 insertions(+), 5 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/drm_bridge.c b/drivers/gpu/drm/drm_bridge.c
> > index a8ed66751c2d..f0508e85ae98 100644
> > --- a/drivers/gpu/drm/drm_bridge.c
> > +++ b/drivers/gpu/drm/drm_bridge.c
> > @@ -227,14 +227,15 @@ int drm_bridge_attach(struct drm_encoder *encoder, struct drm_bridge *bridge,
> > bridge->encoder = NULL;
> > list_del(&bridge->chain_node);
> >
> > + if (ret != -EPROBE_DEFER) {
> > #ifdef CONFIG_OF
> > - DRM_ERROR("failed to attach bridge %pOF to encoder %s: %d\n",
> > - bridge->of_node, encoder->name, ret);
> > + DRM_ERROR("failed to attach bridge %pOF to encoder %s: %d\n",
> > + bridge->of_node, encoder->name, ret);
> > #else
> > - DRM_ERROR("failed to attach bridge to encoder %s: %d\n",
> > - encoder->name, ret);
> > + DRM_ERROR("failed to attach bridge to encoder %s: %d\n",
> > + encoder->name, ret);
> > #endif
> > -
> > + }
>
> This looks fine as such, but I'm concerned about the direction it's
> taking. Ideally, probe deferral should happen at probe time, way before
> the bridge is attached. Doing otherwise is a step in the wrong direction
> in my opinion, and something we'll end up regretting when we'll feel the
> pain it inflicts.

The particular case I'm seeing this is the nwl driver probe deferrals if
the panel bridge isn't ready (which needs a bunch of components
(dsi, panel, backlight wrapped led, ...) and it probes fine later on so I
wonder where you see the actual error cause? That downstream of the
bridge isn't ready or that the display controller is already attaching
the bridge?

Cheers,
-- Guido

>
> > return ret;
> > }
> > EXPORT_SYMBOL(drm_bridge_attach);
>
> --
> Regards,
>
> Laurent Pinchart
>

\
 
 \ /
  Last update: 2021-10-12 22:48    [W:0.129 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site