lkml.org 
[lkml]   [2021]   [Oct]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 05/14] mtd: spinand: Add adjust_op() in manufacturer_ops to modify the ops for manufacturer specific changes
On Tue, 12 Oct 2021 02:16:10 +0530
Apurva Nandan <a-nandan@ti.com> wrote:

> Manufacturers might use a variation of standard SPI NAND flash
> instructions, e.g. Winbond W35N01JW changes the dummy cycle length for
> read register commands when in Octal DTR mode.
>
> Add new function in manufacturer_ops: adjust_op(), which can be called
> to correct the spi_mem op for any alteration in the instruction made by
> the manufacturers. And hence, this function can also be used for
> incorporating variations of SPI instructions in Octal DTR mode.

Okay, so now we have reg accesses differing between vendors in DTR.
Looks like we should have an OP-table for non-IO commands too (similar
to the op_variants mechanism we have for IO commands), at least when
operating in DTR. The reg access path would just end up doing:

struct spi_mem_op op =
spinand->templates[spinand->protocol][cmd];

This way you get rid of all this live-patching/vendor-specific
adjustment (which is likely to get more and more complex since flash
vendors have a tendency of diverging from the common behavior), and
everything gets initialized at probe time.

>
> Datasheet: https://www.winbond.com/export/sites/winbond/datasheet/W35N01JW_Datasheet_Brief.pdf
>
> Signed-off-by: Apurva Nandan <a-nandan@ti.com>
> ---
> drivers/mtd/nand/spi/core.c | 3 +++
> include/linux/mtd/spinand.h | 4 ++++
> 2 files changed, 7 insertions(+)
>
> diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c
> index 4da794ae728d..8e6cf7941a0f 100644
> --- a/drivers/mtd/nand/spi/core.c
> +++ b/drivers/mtd/nand/spi/core.c
> @@ -61,6 +61,9 @@ static void spinand_patch_op(const struct spinand_device *spinand,
> op->data.buswidth = op_buswidth;
> op->data.dtr = op_is_dtr;
> }
> +
> + if (spinand->manufacturer->ops->adjust_op)
> + spinand->manufacturer->ops->adjust_op(op, spinand->reg_proto);
> }
>
> static void spinand_patch_reg_op(const struct spinand_device *spinand,
> diff --git a/include/linux/mtd/spinand.h b/include/linux/mtd/spinand.h
> index f6093cd98d7b..ebb19b2cec84 100644
> --- a/include/linux/mtd/spinand.h
> +++ b/include/linux/mtd/spinand.h
> @@ -257,6 +257,8 @@ struct spinand_devid {
> /**
> * struct manufacurer_ops - SPI NAND manufacturer specific operations
> * @init: initialize a SPI NAND device
> + * @adjust_op: modify the ops for any variation in their cmd, address, dummy or
> + * data phase by the manufacturer
> * @cleanup: cleanup a SPI NAND device
> *
> * Each SPI NAND manufacturer driver should implement this interface so that
> @@ -264,6 +266,8 @@ struct spinand_devid {
> */
> struct spinand_manufacturer_ops {
> int (*init)(struct spinand_device *spinand);
> + void (*adjust_op)(struct spi_mem_op *op,
> + const enum spinand_proto reg_proto);
> void (*cleanup)(struct spinand_device *spinand);
> };
>

\
 
 \ /
  Last update: 2021-10-12 08:55    [W:0.516 / U:0.108 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site