lkml.org 
[lkml]   [2021]   [Oct]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 6/9] of: add support for 'dynamic' DT property
From
Date
Hi Rob,

On 10/11/21 8:58 AM, Frank Rowand wrote:
> Hi Matt, Greg,

That was meant to be Rob, not Matt.

-Frank

>
> On 10/8/21 1:51 PM, Frank Rowand wrote:
>> On 10/6/21 7:09 PM, Zev Weiss wrote:
>>> Nodes marked with this (boolean) property will have a writable status
>>> sysfs file, which can be used to toggle them between "okay" and
>>> "reserved", effectively hot-plugging them. Note that this will only
>>> be effective for devices on busses that register for OF reconfig
>>> notifications (currently spi, i2c, and platform), and only if
>>> CONFIG_OF_DYNAMIC is enabled.
>>>
>>> Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
>>> ---
>>> drivers/of/kobj.c | 69 +++++++++++++++++++++++++++++++++++++++++++++++
>>> 1 file changed, 69 insertions(+)
>>>
>>> diff --git a/drivers/of/kobj.c b/drivers/of/kobj.c
>>> index 378cb421aae1..141ae23f3130 100644
>>> --- a/drivers/of/kobj.c
>>> +++ b/drivers/of/kobj.c
>>> @@ -36,6 +36,69 @@ static ssize_t of_node_property_read(struct file *filp, struct kobject *kobj,
>>> return memory_read_from_buffer(buf, count, &offset, pp->value, pp->length);
>>> }
>>>
>>> +static ssize_t of_node_status_write(struct file *filp, struct kobject *kobj,
>>> + struct bin_attribute *bin_attr, char *buf,
>>> + loff_t offset, size_t count)
>>> +{
>>> + int rc;
>>> + char *newstatus;
>>> + struct property **deadprev;
>>> + struct property *newprop = NULL;
>>> + struct property *oldprop = container_of(bin_attr, struct property, attr);
>>> + struct device_node *np = container_of(kobj, struct device_node, kobj);
>>> +
>>> + if (WARN_ON_ONCE(strcmp(oldprop->name, "status")))
>>> + return -EIO;
>>> +
>>> + if (offset)
>>> + return -EINVAL;
>>> +
>>> + if (sysfs_buf_streq(buf, count, "okay") || sysfs_buf_streq(buf, count, "ok"))
>>> + newstatus = "okay";
>>> + else if (sysfs_buf_streq(buf, count, "reserved"))
>>> + newstatus = "reserved";
>>> + else if (sysfs_buf_streq(buf, count, "disabled"))
>>> + newstatus = "disabled";
>>> + else
>>> + return -EINVAL;
>>> +
>>> + if (!strcmp(newstatus, oldprop->value))
>>> + return count;
>>> +
>>
>> If the general approach of this patch set is the correct way to provide the desired
>> functionality (I'm still pondering that), then a version of the following code
>
> After pondering, this approach does not appear workable to me.
>
> If we allow one property to be writable via sysfs we open the door for any property to
> be writable from sysfs. This will likely lead to a desire to modify more than one
> related property as a single transaction (so that the changes occur as a single
> transaction, under a single lock event, with a single notification after all
> of the properties are modified). This is not meant to be an exhaustive list of
> the issues that have already been thought through in the context of overlays
> (though not all of the issues have been addressed with overlays, at least many
> of them, such as one transaction to apply an entire overlay, have been.)
>
> I don't want to make this a long missive, but will at least note the next
> issue that popped up in my pondering, which is complications from modifying
> the same items in a devicetree via different methods, such as both writing
> to sysfs and applying/removing overlays. If the problems in the previous
> paragraph are not sufficient to prevent the sysfs approach then I can
> elaborate further on these additional issues.
>
> So another approach is needed. I have no yet thought this through, but I
> have an alternative. First, change the new property name from "dynamic"
> to something more descriptive like "ownership_shifts_between_os_and_others"
> (yes, my suggestions is way too verbose and needs to be word smithed, but
> the point is to clearly state the underlying action that occurs), then
> define the result of this variable to be driver specific, where the
> driver is required upon probe to instantiate the device in a manner
> that does not impact the other user(s) of the underlying hardware
> and to use a driver specific method to transfer control of the
> hardware between the os and the other user(s). I propose the method
> would be via a device specific file (or set of files) in sysfs (Greg's
> input invited on the use of sysfs in this manner - if I recall correctly
> this is the current preferred mechanism).
>
> -Frank
>
>
>> probably belongs in drivers/of/dynamic.c so that it is easier to maintain and keep
>> consistent with other dynamic devicetree updates. If you look at the code there
>> that touches deadprops (eg __of_changeset_entry_apply()) you will notice that the
>> locking issues are more extensive than what is implemented here.
>>
>> I'm still thinking about how this interacts with other forms of dynamic devicetree
>> changes (eg drivers/of/dynamic.c and also overlays).
>>
>>> + /*
>>> + * of_update_property_self() doesn't free replaced properties, so
>>> + * rifle through deadprops first to see if there's an equivalent old
>>> + * status property we can reuse instead of allocating a new one.
>>> + */
>>> + mutex_lock(&of_mutex);
>>> + for (deadprev = &np->deadprops; *deadprev; deadprev = &(*deadprev)->next) {
>>> + struct property *deadprop = *deadprev;
>>> + if (!strcmp(deadprop->name, "status") &&
>>> + deadprop->length == strlen(newstatus) + 1 &&
>>> + !strcmp(deadprop->value, newstatus)) {
>>> + *deadprev = deadprop->next;
>>> + deadprop->next = NULL;
>>> + newprop = deadprop;
>>> + break;
>>> + }
>>> + }
>>> + mutex_unlock(&of_mutex);
>>> +
>>> + if (!newprop) {
>>> + newprop = kzalloc(sizeof(*newprop), GFP_KERNEL);
>>> + if (!newprop)
>>> + return -ENOMEM;
>>> +
>>> + newprop->name = oldprop->name;
>>> + newprop->value = newstatus;
>>> + newprop->length = strlen(newstatus) + 1;
>>> + }
>>> +
>>> + rc = of_update_property_self(np, newprop, true);
>>
>> -Frank
>>
>>> +
>>> + return rc ? rc : count;
>>> +}
>>> +
>>> /* always return newly allocated name, caller must free after use */
>>> static const char *safe_name(struct kobject *kobj, const char *orig_name)
>>> {
>>> @@ -79,6 +142,12 @@ int __of_add_property_sysfs(struct device_node *np, struct property *pp)
>>> pp->attr.size = secure ? 0 : pp->length;
>>> pp->attr.read = of_node_property_read;
>>>
>>> + if (!strcmp(pp->name, "status") && of_property_read_bool(np, "dynamic")) {
>>> + pp->attr.attr.mode |= 0200;
>>> + pp->attr.write = of_node_status_write;
>>> + pp->attr.growable = true;
>>> + }
>>> +
>>> rc = sysfs_create_bin_file(&np->kobj, &pp->attr);
>>> WARN(rc, "error adding attribute %s to node %pOF\n", pp->name, np);
>>> return rc;
>>>

\
 
 \ /
  Last update: 2021-10-11 16:47    [W:0.096 / U:0.392 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site