lkml.org 
[lkml]   [2021]   [Oct]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
SubjectRe: [PATCH] tty: tty_buffer: Fix the softlockup issue in flush_to_ldisc
From

在 2021/10/11 15:50, Greg KH 写道:
> On Mon, Oct 11, 2021 at 03:42:38PM +0800, guanghui.fgh wrote:
>> 在 2021/10/10 21:18, Greg KH 写道:
>>> On Fri, Oct 08, 2021 at 03:50:15PM +0800, guanghui.fgh wrote:
>>>> 在 2021/9/30 13:38, Greg KH 写道:
>>>>> On Thu, Sep 30, 2021 at 11:11:38AM +0800, Guanghui Feng wrote:
>>>>>> When I run ltp testcase(ltp/testcases/kernel/pty/pty04.c) with arm64, there is a soft lockup,
>>>>>> which look like this one:
>>>>>>
>>>>>> watchdog: BUG: soft lockup - CPU#41 stuck for 67s! [kworker/u192:2:106867]
>>>>>> CPU: 41 PID: 106867 Comm: kworker/u192:2 Kdump: loaded Tainted: G OE 5.10.23 #1
>>>>>> Hardware name: H3C R4960 G3/BC82AMDDA, BIOS 1.70 01/07/2021
>>>>>> Workqueue: events_unbound flush_to_ldisc
>>>>>> pstate: 00c00009 (nzcv daif +PAN +UAO -TCO BTYPE=--)
>>>>>> pc : slip_unesc+0x80/0x214 [slip]
>>>>>> lr : slip_receive_buf+0x84/0x100 [slip]
>>>>>> sp : ffff80005274bce0
>>>>>> x29: ffff80005274bce0 x28: 0000000000000000
>>>>>> x27: ffff00525626fcc8 x26: ffff800011921078
>>>>>> x25: 0000000000000000 x24: 0000000000000004
>>>>>> x23: ffff00402b4059c0 x22: ffff00402b405940
>>>>>> x21: ffff205d87b81e21 x20: ffff205d87b81b9b
>>>>>> x19: 0000000000000000 x18: 0000000000000000
>>>>>> x17: 0000000000000000 x16: 0000000000000000
>>>>>> x15: 0000000000000000 x14: 5f5f5f5f5f5f5f5f
>>>>>> x13: 5f5f5f5f5f5f5f5f x12: 5f5f5f5f5f5f5f5f
>>>>>> x11: 5f5f5f5f5f5f5f5f x10: 5f5f5f5f5f5f5f5f
>>>>>> x9 : ffff8000097d7628 x8 : ffff205d87b85e20
>>>>>> x7 : 0000000000000000 x6 : 0000000000000001
>>>>>> x5 : ffff8000097dc008 x4 : ffff8000097d75a4
>>>>>> x3 : ffff205d87b81e1f x2 : 0000000000000005
>>>>>> x1 : 000000000000005f x0 : ffff00402b405940
>>>>>> Call trace:
>>>>>> slip_unesc+0x80/0x214 [slip]
>>>>>> tty_ldisc_receive_buf+0x64/0x80
>>>>>> tty_port_default_receive_buf+0x50/0x90
>>>>>> flush_to_ldisc+0xbc/0x110
>>>>>> process_one_work+0x1d4/0x4b0
>>>>>> worker_thread+0x180/0x430
>>>>>> kthread+0x11c/0x120
>>>>>> Kernel panic - not syncing: softlockup: hung tasks
>>>>>> CPU: 41 PID: 106867 Comm: kworker/u192:2 Kdump: loaded Tainted: G OEL 5.10.23 #1
>>>>>> Hardware name: H3C R4960 G3/BC82AMDDA, BIOS 1.70 01/07/2021
>>>>>> Workqueue: events_unbound flush_to_ldisc
>>>>>> Call trace:
>>>>>> dump_backtrace+0x0/0x1ec
>>>>>> show_stack+0x24/0x30
>>>>>> dump_stack+0xd0/0x128
>>>>>> panic+0x15c/0x374
>>>>>> watchdog_timer_fn+0x2b8/0x304
>>>>>> __run_hrtimer+0x88/0x2c0
>>>>>> __hrtimer_run_queues+0xa4/0x120
>>>>>> hrtimer_interrupt+0xfc/0x270
>>>>>> arch_timer_handler_phys+0x40/0x50
>>>>>> handle_percpu_devid_irq+0x94/0x220
>>>>>> __handle_domain_irq+0x88/0xf0
>>>>>> gic_handle_irq+0x84/0xfc
>>>>>> el1_irq+0xc8/0x180
>>>>>> slip_unesc+0x80/0x214 [slip]
>>>>>> tty_ldisc_receive_buf+0x64/0x80
>>>>>> tty_port_default_receive_buf+0x50/0x90
>>>>>> flush_to_ldisc+0xbc/0x110
>>>>>> process_one_work+0x1d4/0x4b0
>>>>>> worker_thread+0x180/0x430
>>>>>> kthread+0x11c/0x120
>>>>>> SMP: stopping secondary CPUs
>>>>>>
>>>>>> In the testcase pty04, there are multple processes and we only pay close attention to the
>>>>>> first three actually. The first process call the write syscall to send data to the pty master
>>>>>> with all one's strength(tty_write->file_tty_write->do_tty_write->n_tty_write call chain).
>>>>>> The second process call the read syscall to receive data by the pty slave(with PF_PACKET socket).
>>>>>> The third process will wait a moment in which the first two processes will do there work and then
>>>>>> it call ioctl to hangup the pty pair which will cease the first two process read/write to the pty.
>>>>>> Before hangup the pty, the first process send data to the pty buffhead with high speed. At the same
>>>>>> time if the workqueue is waken up, the workqueue will do the flush_to_ldisc to pop data from pty
>>>>>> master's buffhead to line discipline in a loop until there is no more data left without any on one's
>>>>>> own schedule which will result in doing work in flush_to_ldisc for a long time. As kernel configured
>>>>>> without CONFIG_PREEMPT, there maybe occurs softlockup in the flush_to_ldisc. So I add cond_resched
>>>>>> in the flush_to_ldisc while loop to avoid it.
>>>>> Please properly wrap your changelog text at 72 columns.
>>>> When I run ltp testcase(ltp/testcases/kernel/pty/pty04.c) with arm64, there is a soft lockup,
>>>> which look like this one:
>>>> Call trace:
>>>> dump_backtrace+0x0/0x1ec
>>>> show_stack+0x24/0x30
>>>> dump_stack+0xd0/0x128
>>>> panic+0x15c/0x374
>>>> watchdog_timer_fn+0x2b8/0x304
>>>> __run_hrtimer+0x88/0x2c0
>>>> __hrtimer_run_queues+0xa4/0x120
>>>> hrtimer_interrupt+0xfc/0x270
>>>> arch_timer_handler_phys+0x40/0x50
>>>> handle_percpu_devid_irq+0x94/0x220
>>>> __handle_domain_irq+0x88/0xf0
>>>> gic_handle_irq+0x84/0xfc
>>>> el1_irq+0xc8/0x180
>>>> slip_unesc+0x80/0x214 [slip]
>>>> tty_ldisc_receive_buf+0x64/0x80
>>>> tty_port_default_receive_buf+0x50/0x90
>>>> flush_to_ldisc+0xbc/0x110
>>>> process_one_work+0x1d4/0x4b0
>>>> worker_thread+0x180/0x430
>>>> kthread+0x11c/0x120
>>>>
>>>> In the testcase pty04, The first process call the write syscall to send data to the pty master.
>>>> At the same time if the workqueue is waken up, the workqueue will do the flush_to_ldisc to pop data
>>>> in a loop until there is no more data left which will result in doing work in flush_to_ldisc for a
>>>> long time. As kernel configured without CONFIG_PREEMPT, there maybe occurs softlockup in the flush_to_ldisc.
>>> Is this a "real" test for something that you have seen in a normal
>>> workload? ltp is known for having buggy/confusing tests in it in the
>>> past, you might wish to consult with the authors of that test.
>> Firstly, thanks for your response.
>>
>> I have check the ltp pty testcase. At the same time, I find the pty
>> softlockup in arm64, and it is similar to others.
>>
>> https://github.com/victronenergy/venus/issues/350
>>
>> https://groups.google.com/g/syzkaller-lts-bugs/c/SpkH8yH26js/m/3aifBl_GAwAJ
> Hm, ok, can you please resubmit this based on the changes discussed in
> thread and I will re-review it again.
>
> thanks,
>
> greg k-h

When I run the ltp testcase(ltp/testcases/kernel/pty/pty04.c) with arm64, there is a soft lockup,
which look like this one:
Call trace:
dump_backtrace+0x0/0x1ec
show_stack+0x24/0x30
dump_stack+0xd0/0x128
panic+0x15c/0x374
watchdog_timer_fn+0x2b8/0x304
__run_hrtimer+0x88/0x2c0
__hrtimer_run_queues+0xa4/0x120
hrtimer_interrupt+0xfc/0x270
arch_timer_handler_phys+0x40/0x50
handle_percpu_devid_irq+0x94/0x220
__handle_domain_irq+0x88/0xf0
gic_handle_irq+0x84/0xfc
el1_irq+0xc8/0x180
slip_unesc+0x80/0x214 [slip]
tty_ldisc_receive_buf+0x64/0x80
tty_port_default_receive_buf+0x50/0x90
flush_to_ldisc+0xbc/0x110
process_one_work+0x1d4/0x4b0
worker_thread+0x180/0x430
kthread+0x11c/0x120

In the testcase pty04, The first process call the write syscall to send data to the pty master.
At the same time, the workqueue will do the flush_to_ldisc to pop data in a loop until there is
no more data left. When the sender and workqueue running in different core, the sender sends data
fastly in full time which will result in workqueue doing work in loop for a long time and occuring
softlockup in flush_to_ldisc with kernel configured without CONFIG_PREEMPT. So I add need_resched
check and cond_resched in the flush_to_ldisc loop to avoid it.

Signed-off-by: Guanghui Feng<guanghuifeng@linux.alibaba.com>


diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index bd2d915..77b92f9 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -534,6 +534,8 @@ static void flush_to_ldisc(struct work_struct *work)
if (!count)
break;
head->read += count;
+ if (need_resched())
+ cond_resched();
}

mutex_unlock(&buf->lock);
--
1.8.3.1
\
 
 \ /
  Last update: 2021-10-11 12:18    [W:0.063 / U:0.712 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site