lkml.org 
[lkml]   [2021]   [Oct]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3] usb: ohci: add check for host controller functional states
From
Date

在 2021/10/10 上午3:39, Alan Stern 写道:
> On Sat, Oct 09, 2021 at 10:01:25AM +0800, zhuyinbo wrote:
>> 在 2021/10/8 下午10:26, Alan Stern 写道:
>>> On Fri, Oct 08, 2021 at 03:26:10PM +0800, Yinbo Zhu wrote:
>>>> The usb states of ohci controller include UsbOperational, UsbReset,
>>>> UsbSuspend and UsbResume. Among them, only the UsbOperational state
>>>> supports launching the start of frame for host controller according
>>>> the ohci protocol spec, but in S3/S4 press test procedure, it may
>>> Nobody reading this will know what "S3/S4 press test procedure" means.
>>> You have to explain it, or use a different name that people will
>>> understand.
>> okay, I got it.
>>>> happen that the start of frame was launched in other usb states and
>>>> cause ohci works abnormally then kernel will allways report rcu
>>>> call trace. This patch was to add check for host controller
>>>> functional states and if it is not UsbOperational state that need
>>>> set INTR_SF in intrdisable register to ensure SOF Token generation
>>>> was been disabled.
>>> This doesn't make sense. You already mentioned that only the
>>> UsbOperational state supports sending start-of-frame packets. So if the
>>> controller is in a different state then it won't send these packets,
>>> whether INTR_SF is enabled or not.
>>>
>>> What problem are you really trying to solve?
>> Only UsbOperational state supports sending start-of-frame packets, but in
>> fact, in S3/S4 press test procedure,
>>
>> usb in non-UsbOperational state that send start-of-frame packets but hc
>> driver doesn't deal with this frame. and hc will
>>
>> allways lauched the SOF for finishing the frame, the cpu will hand this sof
>> interrupt and doesn't deal with time interrupt
>>
>> that will cause rcu call trace then system doesn't suspend to memory/disk.
> I still don't understand.
>
> Are you saying that your OHCI controller behaves badly because it sends
> SOF packets even when the state is different from UsbOperational?

HC will allways report the SoF interrupt in the all time when HC was not
in NO-UsbOperation state.

and no WritebackDoneHead interrupt that is the issue phenomenon. and
this situation is badly state for ohci.

>
>> Hi Alan Stern,
>>
>>     even though ed_rm_list is non-NULL, if hc in non-UsbOperation state set
>> SoF status in usbsts register that is illegal,
>>
>> at this time hcd doesn't need care URB whether finished,  because hc had
>> into a wrong state. even thoug it doesn't has this patch,
>>
>> URB was not be able to finish when hc in above worng state. except software
>> can intervence this wrong state. but the SoF bit of usbsts
>>
>> register was set by HC, and this action will happen always !!! software
>> clear SoF state I think it isn't make sense. software only disable SoF
>>
>> interrupt to fix HC wrong state.
> This problem happens when you go into S3 or S4 suspend, right? So you
> should fix the problem by disabling INTR_SF when the root hub is
> suspended. Try adding
>
> /* All ED unlinks should be finished, no need for SOF interrupts */
> ohci_writel(ohci, OHCI_INTR_SF, &ohci->regs->intrdisable);
>
> into ohci_rh_suspend(), just before the update_done_list() call. If you
> add this then INTR_SF will not be enabled during S3 or S4 suspend, so
> the problem shouldn't occur. Does that work for you?

The system doesn't suspend to disk completely by my test result and hc
will always produce SoF interrupt.

I encountered SoF interrupt  issue when HC in UsbSuspend state. and I
think when hc in

UsbResume/UsbRest/ SoF interrupt issue may be happen so I disable
INTR_SF in ohci_irq.

So I think disable INTR_SF in suspend function which this way isn't good
for me.

    In addition, I hope my patch was not only fix the bug i encountered
and it can limit HC into badly state and it should be the

base limit condition and prevent more unknown problems.  In fact, HC
doesn't deal with ed/td list and done list by the ohci spec, so

I think my patch has no risk for ohci.

      by the way, root hub state isn't completely same with HC, but the
root hub reset and resume signaling are controlled by the hcfs bits.

and hcd can set hcfs to decide hc usb state, so I judge whether set
SF_INT to interrupt disable register only depend on HC state.

>
>>       In additon, when kernel include my patch, that it does't happen about
>> what you descriped that driver will not be able to finish unlinging URBs.
>>
>> Because above issue happen in S3/S4(Suspend to disk/Suspend to mem) test
>> procedure, if ed_rm_lis is no-NULL but my patch disable SoF interrupt.
>>
>> then when S3/S4 recovery to cpu idle state that usb resume will be called,
>> reume function has following logic, URB will continue to be processed.
>>
>>       static int ohci_rh_resume (struct ohci_hcd *ohci)
>>
>>      {
>>
>>         ...
>>
>>         242         if (ohci->ed_rm_list)
>>         243                 ohci_writel (ohci, OHCI_INTR_SF,
>> &ohci->regs->intrenable);
>>
>>        ...
>>
>>       }
> I'm worried that your patch may disable INTR_SF even when the controller
> has not gone into S3 or S4 suspend. Maybe this won't cause problems,
> but it's better to be safe and do the disable _only_ when a suspend
> occurs.
>
> Alan Stern

Hi  Alan Stern,

    According to the previous statement, I think my patch has no risk
on ohci.




\
 
 \ /
  Last update: 2021-10-11 07:11    [W:0.100 / U:0.848 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site