lkml.org 
[lkml]   [2021]   [Oct]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 7/8] dt-bindings: nfc: ti,trf7970a: convert to dtschema
Date
Convert the TI TRF7970A NFC to DT schema format.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
---
.../bindings/net/nfc/ti,trf7970a.yaml | 98 +++++++++++++++++++
.../devicetree/bindings/net/nfc/trf7970a.txt | 43 --------
MAINTAINERS | 2 +-
3 files changed, 99 insertions(+), 44 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/nfc/ti,trf7970a.yaml
delete mode 100644 Documentation/devicetree/bindings/net/nfc/trf7970a.txt

diff --git a/Documentation/devicetree/bindings/net/nfc/ti,trf7970a.yaml b/Documentation/devicetree/bindings/net/nfc/ti,trf7970a.yaml
new file mode 100644
index 000000000000..40da2ac98978
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nfc/ti,trf7970a.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/nfc/ti,trf7970a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments TRF7970A RFID/NFC/15693 Transceiver
+
+maintainers:
+ - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+ - Mark Greer <mgreer@animalcreek.com>
+
+properties:
+ compatible:
+ const: ti,trf7970a
+
+ autosuspend-delay:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Specify autosuspend delay in milliseconds.
+
+ clock-frequency:
+ description: |
+ Set to specify that the input frequency to the trf7970a is 13560000Hz or
+ 27120000Hz
+
+ en2-rf-quirk:
+ type: boolean
+ description: |
+ Specify that the trf7970a being used has the "EN2 RF" erratum
+
+ interrupts:
+ maxItems: 1
+
+ irq-status-read-quirk:
+ type: boolean
+ description: |
+ Specify that the trf7970a being used has the "IRQ Status Read" erratum
+
+ reg:
+ maxItems: 1
+
+ spi-max-frequency: true
+
+ ti,enable-gpios:
+ minItems: 1
+ maxItems: 2
+ description: |
+ One or two GPIO entries used for 'EN' and 'EN2' pins on the TRF7970A. EN2
+ is optional.
+
+ vdd-io-supply:
+ description: |
+ Regulator specifying voltage for VDD-IO
+
+ vin-supply:
+ description: |
+ Regulator for supply voltage to VIN pin
+
+required:
+ - compatible
+ - interrupts
+ - reg
+ - spi-max-frequency
+ - ti,enable-gpios
+ - vin-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ nfc@0 {
+ compatible = "ti,trf7970a";
+ reg = <0>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&trf7970a_default>;
+ spi-max-frequency = <2000000>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <14 0>;
+
+ ti,enable-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>,
+ <&gpio2 5 GPIO_ACTIVE_HIGH>;
+ vin-supply = <&ldo3_reg>;
+ vdd-io-supply = <&ldo2_reg>;
+ autosuspend-delay = <30000>;
+ irq-status-read-quirk;
+ en2-rf-quirk;
+ clock-frequency = <27120000>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/net/nfc/trf7970a.txt b/Documentation/devicetree/bindings/net/nfc/trf7970a.txt
deleted file mode 100644
index ba1934b950e5..000000000000
--- a/Documentation/devicetree/bindings/net/nfc/trf7970a.txt
+++ /dev/null
@@ -1,43 +0,0 @@
-* Texas Instruments TRF7970A RFID/NFC/15693 Transceiver
-
-Required properties:
-- compatible: Should be "ti,trf7970a".
-- spi-max-frequency: Maximum SPI frequency (<= 2000000).
-- interrupts: A single interrupt specifier.
-- ti,enable-gpios: One or two GPIO entries used for 'EN' and 'EN2' pins on the
- TRF7970A. EN2 is optional.
-- vin-supply: Regulator for supply voltage to VIN pin
-
-Optional SoC Specific Properties:
-- pinctrl-names: Contains only one value - "default".
-- pintctrl-0: Specifies the pin control groups used for this controller.
-- autosuspend-delay: Specify autosuspend delay in milliseconds.
-- irq-status-read-quirk: Specify that the trf7970a being used has the
- "IRQ Status Read" erratum.
-- en2-rf-quirk: Specify that the trf7970a being used has the "EN2 RF"
- erratum.
-- vdd-io-supply: Regulator specifying voltage for vdd-io
-- clock-frequency: Set to specify that the input frequency to the trf7970a is 13560000Hz or 27120000Hz
-
-Example (for ARM-based BeagleBone with TRF7970A on SPI1):
-
-&spi1 {
-
- nfc@0 {
- compatible = "ti,trf7970a";
- reg = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&trf7970a_default>;
- spi-max-frequency = <2000000>;
- interrupt-parent = <&gpio2>;
- interrupts = <14 0>;
- ti,enable-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>,
- <&gpio2 5 GPIO_ACTIVE_HIGH>;
- vin-supply = <&ldo3_reg>;
- vdd-io-supply = <&ldo2_reg>;
- autosuspend-delay = <30000>;
- irq-status-read-quirk;
- en2-rf-quirk;
- clock-frequency = <27120000>;
- };
-};
diff --git a/MAINTAINERS b/MAINTAINERS
index 3294aaf5e56c..23dd7aac38a0 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -18916,7 +18916,7 @@ M: Mark Greer <mgreer@animalcreek.com>
L: linux-wireless@vger.kernel.org
L: linux-nfc@lists.01.org (subscribers-only)
S: Supported
-F: Documentation/devicetree/bindings/net/nfc/trf7970a.txt
+F: Documentation/devicetree/bindings/net/nfc/ti,trf7970a.yaml
F: drivers/nfc/trf7970a.c

TI TSC2046 ADC DRIVER
--
2.30.2
\
 
 \ /
  Last update: 2021-10-11 09:41    [W:0.439 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site