lkml.org 
[lkml]   [2021]   [Oct]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: [PATCH V1 1/3] rpmsg: core: Add signal API support
    Good day Deepak,

    On Thu, Sep 30, 2021 at 09:02:01PM +0530, Deepak Kumar Singh wrote:
    > Some transports like Glink support the state notifications between
    > clients using signals similar to serial protocol signals.
    > Local glink client drivers can send and receive signals to glink
    > clients running on remote processors.
    >
    > Add apis to support sending and receiving of signals by rpmsg clients.
    >
    > Signed-off-by: Deepak Kumar Singh <deesin@codeaurora.org>
    > ---
    > drivers/rpmsg/rpmsg_core.c | 21 +++++++++++++++++++++
    > drivers/rpmsg/rpmsg_internal.h | 2 ++
    > include/linux/rpmsg.h | 15 +++++++++++++++
    > 3 files changed, 38 insertions(+)
    >
    > diff --git a/drivers/rpmsg/rpmsg_core.c b/drivers/rpmsg/rpmsg_core.c
    > index 9151836..5cae50c 100644
    > --- a/drivers/rpmsg/rpmsg_core.c
    > +++ b/drivers/rpmsg/rpmsg_core.c
    > @@ -327,6 +327,24 @@ int rpmsg_trysend_offchannel(struct rpmsg_endpoint *ept, u32 src, u32 dst,
    > }
    > EXPORT_SYMBOL(rpmsg_trysend_offchannel);
    >
    > +/**
    > + * rpmsg_set_flow_control() - sets/clears searial flow control signals
    > + * @ept: the rpmsg endpoint
    > + * @enable: enable or disable serial flow control
    > + *
    > + * Returns 0 on success and an appropriate error value on failure.
    > + */
    > +int rpmsg_set_flow_control(struct rpmsg_endpoint *ept, bool enable)
    > +{
    > + if (WARN_ON(!ept))
    > + return -EINVAL;
    > + if (!ept->ops->set_flow_control)
    > + return -ENXIO;
    > +
    > + return ept->ops->set_flow_control(ept, enable);
    > +}
    > +EXPORT_SYMBOL(rpmsg_set_flow_control);
    > +

    I'm looking at this patchset as the introduction of an out-of-bound control interface. But looking at the implementation of the GLINK's set_flow_control() the data is sent in-band, making me perplexed about introducing a new rpmsg_endpoint_ops for something that could be done from user space. Especially when user space is triggering the message with an ioctl in patch 3.

    Moreover this interface is case specific and doesn't reflect the generic nature
    found in ept->sig_cb.

    > /*
    > * match a rpmsg channel with a channel info struct.
    > * this is used to make sure we're not creating rpmsg devices for channels
    > @@ -514,6 +532,9 @@ static int rpmsg_dev_probe(struct device *dev)
    >
    > rpdev->ept = ept;
    > rpdev->src = ept->addr;
    > +
    > + if (rpdrv->signals)
    > + ept->sig_cb = rpdrv->signals;
    > }
    >
    > err = rpdrv->probe(rpdev);
    > diff --git a/drivers/rpmsg/rpmsg_internal.h b/drivers/rpmsg/rpmsg_internal.h
    > index a76c344..dcb2ec1 100644
    > --- a/drivers/rpmsg/rpmsg_internal.h
    > +++ b/drivers/rpmsg/rpmsg_internal.h
    > @@ -53,6 +53,7 @@ struct rpmsg_device_ops {
    > * @trysendto: see @rpmsg_trysendto(), optional
    > * @trysend_offchannel: see @rpmsg_trysend_offchannel(), optional
    > * @poll: see @rpmsg_poll(), optional
    > + * @set_flow_control: see @rpmsg_set_flow_control(), optional
    > *
    > * Indirection table for the operations that a rpmsg backend should implement.
    > * In addition to @destroy_ept, the backend must at least implement @send and
    > @@ -72,6 +73,7 @@ struct rpmsg_endpoint_ops {
    > void *data, int len);
    > __poll_t (*poll)(struct rpmsg_endpoint *ept, struct file *filp,
    > poll_table *wait);
    > + int (*set_flow_control)(struct rpmsg_endpoint *ept, bool enable);
    > };
    >
    > struct device *rpmsg_find_device(struct device *parent,
    > diff --git a/include/linux/rpmsg.h b/include/linux/rpmsg.h
    > index d97dcd0..b805c70 100644
    > --- a/include/linux/rpmsg.h
    > +++ b/include/linux/rpmsg.h
    > @@ -62,12 +62,14 @@ struct rpmsg_device {
    > };
    >
    > typedef int (*rpmsg_rx_cb_t)(struct rpmsg_device *, void *, int, void *, u32);
    > +typedef int (*rpmsg_rx_sig_t)(struct rpmsg_device *, void *, u32);
    >
    > /**
    > * struct rpmsg_endpoint - binds a local rpmsg address to its user
    > * @rpdev: rpmsg channel device
    > * @refcount: when this drops to zero, the ept is deallocated
    > * @cb: rx callback handler
    > + * @sig_cb: rx serial signal handler
    > * @cb_lock: must be taken before accessing/changing @cb
    > * @addr: local rpmsg address
    > * @priv: private data for the driver's use
    > @@ -90,6 +92,7 @@ struct rpmsg_endpoint {
    > struct rpmsg_device *rpdev;
    > struct kref refcount;
    > rpmsg_rx_cb_t cb;
    > + rpmsg_rx_sig_t sig_cb;
    > struct mutex cb_lock;
    > u32 addr;
    > void *priv;
    > @@ -104,6 +107,7 @@ struct rpmsg_endpoint {
    > * @probe: invoked when a matching rpmsg channel (i.e. device) is found
    > * @remove: invoked when the rpmsg channel is removed
    > * @callback: invoked when an inbound message is received on the channel
    > + * @signals: invoked when a serial signal change is received on the channel
    > */
    > struct rpmsg_driver {
    > struct device_driver drv;
    > @@ -111,6 +115,7 @@ struct rpmsg_driver {
    > int (*probe)(struct rpmsg_device *dev);
    > void (*remove)(struct rpmsg_device *dev);
    > int (*callback)(struct rpmsg_device *, void *, int, void *, u32);
    > + int (*signals)(struct rpmsg_device *rpdev, void *priv, u32);
    > };
    >
    > static inline u16 rpmsg16_to_cpu(struct rpmsg_device *rpdev, __rpmsg16 val)
    > @@ -186,6 +191,8 @@ int rpmsg_trysend_offchannel(struct rpmsg_endpoint *ept, u32 src, u32 dst,
    > __poll_t rpmsg_poll(struct rpmsg_endpoint *ept, struct file *filp,
    > poll_table *wait);
    >
    > +int rpmsg_set_flow_control(struct rpmsg_endpoint *ept, bool enable);
    > +
    > #else
    >
    > static inline int rpmsg_register_device(struct rpmsg_device *rpdev)
    > @@ -296,6 +303,14 @@ static inline __poll_t rpmsg_poll(struct rpmsg_endpoint *ept,
    > return 0;
    > }
    >
    > +static inline int rpmsg_set_flow_control(struct rpmsg_endpoint *ept, bool enable);
    > +{
    > + /* This shouldn't be possible */
    > + WARN_ON(1);
    > +
    > + return -ENXIO;
    > +}
    > +
    > #endif /* IS_ENABLED(CONFIG_RPMSG) */
    >
    > /* use a macro to avoid include chaining to get THIS_MODULE */
    > --
    > The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
    > a Linux Foundation Collaborative Project
    >

    \
     
     \ /
      Last update: 2021-10-11 20:03    [W:4.268 / U:0.268 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site