lkml.org 
[lkml]   [2021]   [Jan]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 00/48] Introduce core voltage scaling for NVIDIA Tegra20/30 SoCs
On Thu, Dec 17, 2020 at 09:05:50PM +0300, Dmitry Osipenko wrote:
> Introduce core voltage scaling for NVIDIA Tegra20/30 SoCs, which reduces
> power consumption and heating of the Tegra chips. Tegra SoC has multiple
> hardware units which belong to a core power domain of the SoC and share
> the core voltage. The voltage must be selected in accordance to a minimum
> requirement of every core hardware unit.
>
> The minimum core voltage requirement depends on:
>
> 1. Clock enable state of a hardware unit.
> 2. Clock frequency.
> 3. Unit's internal idling/active state.
>
> This series is tested on Acer A500 (T20), AC100 (T20), Nexus 7 (T30),
> Ouya (T30), TK1 (T124) and some others. I also added voltage scaling to
> the Ventana (T20) and Cardhu (T30) boards which are tested by NVIDIA's CI
> farm. Tegra30 is now couple degrees cooler on Nexus 7 and stays cool on
> Ouya (instead of becoming burning hot) while system is idling. It should
> be possible to improve this further by implementing a more advanced power
> management features for the kernel drivers.
>
> The DVFS support is opt-in for all boards, meaning that older DTBs will
> continue to work like they did it before this series. It should be possible
> to easily add the core voltage scaling support for Tegra114+ SoCs based on
> this grounding work later on, if anyone will want to implement it.

The same comment as for your interconnect work: for sets touching
multiple systems please mention the dependencies between patches in the
cover letter. Not as a reply to such remark like I make here, but as a
separate entry in the cover letter.

Best regards,
Krzysztof

\
 
 \ /
  Last update: 2021-01-05 18:14    [W:0.395 / U:3.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site