lkml.org 
[lkml]   [2021]   [Jan]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v4 net-next 02/19] dts: marvell: add CM3 SRAM memory to cp115 ethernet device tree
    Date
    From: Konstantin Porotchkin <kostap@marvell.com>

    CM3 SRAM address space would be used for Flow Control configuration.

    Signed-off-by: Stefan Chulski <stefanc@marvell.com>
    ---
    arch/arm64/boot/dts/marvell/armada-cp11x.dtsi | 10 ++++++++++
    1 file changed, 10 insertions(+)

    diff --git a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
    index 9dcf16b..359cf42 100644
    --- a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
    +++ b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
    @@ -69,6 +69,8 @@
    status = "disabled";
    dma-coherent;

    + cm3-mem = <&CP11X_LABEL(cm3_sram)>;
    +
    CP11X_LABEL(eth0): eth0 {
    interrupts = <39 IRQ_TYPE_LEVEL_HIGH>,
    <43 IRQ_TYPE_LEVEL_HIGH>,
    @@ -211,6 +213,14 @@
    };
    };

    + CP11X_LABEL(cm3_sram): cm3@220000 {
    + compatible = "mmio-sram";
    + reg = <0x220000 0x800>;
    + #address-cells = <1>;
    + #size-cells = <1>;
    + ranges = <0 0x220000 0x800>;
    + };
    +
    CP11X_LABEL(rtc): rtc@284000 {
    compatible = "marvell,armada-8k-rtc";
    reg = <0x284000 0x20>, <0x284080 0x24>;
    --
    1.9.1
    \
     
     \ /
      Last update: 2021-01-27 12:51    [W:2.307 / U:0.056 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site