lkml.org 
[lkml]   [2021]   [Jan]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v6] fbtft: add tearing signal detect
On Wed, 27 Jan 2021 10:00:13 +0100
Geert Uytterhoeven <geert@linux-m68k.org> wrote:

> Hi Carlis,
>
> On Wed, Jan 27, 2021 at 9:52 AM Carlis <zhangxuezhi3@gmail.com> wrote:
> > From: zhangxuezhi <zhangxuezhi1@yulong.com>
> >
> > For st7789v ic,add tearing signal detect to avoid screen tearing
> >
> > Signed-off-by: zhangxuezhi <zhangxuezhi1@yulong.com>
>
> Thanks for your patch!
>
> > --- a/drivers/staging/fbtft/fb_st7789v.c
> > +++ b/drivers/staging/fbtft/fb_st7789v.c
>
> > @@ -82,6 +111,34 @@ enum st7789v_command {
> > */
> > static int init_display(struct fbtft_par *par)
> > {
> > + int rc;
> > + struct device *dev = par->info->device;
> > +
> > + par->gpio.te = devm_gpiod_get_index_optional(dev, "te", 0,
> > GPIOD_IN);
> > + if (IS_ERR(par->gpio.te)) {
> > + rc = PTR_ERR(par->gpio.te);
> > + pr_err("Failed to request te gpio: %d\n", rc);
> > + par->gpio.te = NULL;
>
> Errors (e.g. -EPROBE_DEFER) should be propagated upstream,
> not ignored.
>
> > + }
> > + if (par->gpio.te) {
> > + init_completion(&spi_panel_te);
> > + mutex_init(&te_mutex);
> > + rc = devm_request_irq(dev,
> > + gpiod_to_irq(par->gpio.te),
> > + spi_panel_te_handler,
> > IRQF_TRIGGER_RISING,
> > + "TE_GPIO", par);
> > + if (rc) {
> > + pr_err("TE request_irq failed.\n");
> > + devm_gpiod_put(dev, par->gpio.te);
> > + par->gpio.te = NULL;
>
> Errors (e.g. -EPROBE_DEFER) should be propagated upstream,
> not ignored.
>
> > + } else {
> > +
> > disable_irq_nosync(gpiod_to_irq(par->gpio.te));
> > + pr_info("TE request_irq completion.\n");
> > + }
> > + } else {
> > + pr_info("%s:%d, TE gpio not specified\n",
> > + __func__, __LINE__);
> > + }
> > /* turn off sleep mode */
> > write_reg(par, MIPI_DCS_EXIT_SLEEP_MODE);
> > mdelay(120);
>
> Gr{oetje,eeting}s,
>
> Geert
>

hi,i will fix in the patch v7

\
 
 \ /
  Last update: 2021-01-27 10:32    [W:0.049 / U:0.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site