lkml.org 
[lkml]   [2021]   [Jan]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 0/2] net: sfp: add support for GPON RTL8672/RTL9601C and Ubiquiti U-Fiber
On Monday 25 January 2021 14:42:21 Russell King - ARM Linux admin wrote:
> On Mon, Jan 25, 2021 at 03:23:01PM +0100, Pali Rohár wrote:
> > On Monday 25 January 2021 14:16:44 Russell King - ARM Linux admin wrote:
> > > On Mon, Jan 25, 2021 at 03:09:57PM +0100, Pali Rohár wrote:
> > > > On Monday 18 January 2021 10:34:35 Pali Rohár wrote:
> > > > > On Monday 11 January 2021 12:39:07 Pali Rohár wrote:
> > > > > > This is a third version of patches which add workarounds for
> > > > > > RTL8672/RTL9601C EEPROMs and Ubiquiti U-Fiber Instant SFP.
> > > > > >
> > > > > > Russel's PATCH v2 2/3 was dropped from this patch series as
> > > > > > it is being handled separately.
> > > > >
> > > > > Andrew and Russel, are you fine with this third iteration of patches?
> > > > > Or are there still some issues which needs to be fixed?
> > > >
> > > > PING!
> > >
> > > What about the commit message suggestions from Marek?
> >
> > I have already wrote that I'm fine with those suggestions.
> >
> > It is the only thing to handle? If yes, should I send a new patch series
> > with fixed commit messages?
>
> Yes, because that's the way the netdev list works - patches sent to
> netdev go into patchwork, when they get reviewed and acks etc,
> patchwork updates itself. Jakub or David can then see what the status
> is and apply them to the net or net-next trees as appropriate.

Ok! If this is the only remaining issue, I will update commit messages
and send a new patch series. I was just waiting for a response if
somebody else has other comments or if somebody write that is fine with
it.

> The "finished" patches need to be posted for this process to start.
>
> Thanks.

\
 
 \ /
  Last update: 2021-01-26 03:49    [W:0.141 / U:0.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site