lkml.org 
[lkml]   [2021]   [Jan]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2 1/1] riscv/kasan: add KASAN_VMALLOC support
From
On Fri, 15 Jan 2021 21:58:35 PST (-0800), nylon7@andestech.com wrote:
> It references to x86/s390 architecture.
>
> So, it doesn't map the early shadow page to cover VMALLOC space.
>
> Prepopulate top level page table for the range that would otherwise be
> empty.
>
> lower levels are filled dynamically upon memory allocation while
> booting.
>
> Signed-off-by: Nylon Chen <nylon7@andestech.com>
> Signed-off-by: Nick Hu <nickhu@andestech.com>
> ---
> arch/riscv/Kconfig | 1 +
> arch/riscv/mm/kasan_init.c | 57 +++++++++++++++++++++++++++++++++++++-
> 2 files changed, 57 insertions(+), 1 deletion(-)
>
> diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
> index 81b76d44725d..15a2c8088bbe 100644
> --- a/arch/riscv/Kconfig
> +++ b/arch/riscv/Kconfig
> @@ -57,6 +57,7 @@ config RISCV
> select HAVE_ARCH_JUMP_LABEL
> select HAVE_ARCH_JUMP_LABEL_RELATIVE
> select HAVE_ARCH_KASAN if MMU && 64BIT
> + select HAVE_ARCH_KASAN_VMALLOC if MMU && 64BIT
> select HAVE_ARCH_KGDB
> select HAVE_ARCH_KGDB_QXFER_PKT
> select HAVE_ARCH_MMAP_RND_BITS if MMU
> diff --git a/arch/riscv/mm/kasan_init.c b/arch/riscv/mm/kasan_init.c
> index 12ddd1f6bf70..4b9149f963d3 100644
> --- a/arch/riscv/mm/kasan_init.c
> +++ b/arch/riscv/mm/kasan_init.c
> @@ -9,6 +9,19 @@
> #include <linux/pgtable.h>
> #include <asm/tlbflush.h>
> #include <asm/fixmap.h>
> +#include <asm/pgalloc.h>
> +
> +static __init void *early_alloc(size_t size, int node)
> +{
> + void *ptr = memblock_alloc_try_nid(size, size,
> + __pa(MAX_DMA_ADDRESS), MEMBLOCK_ALLOC_ACCESSIBLE, node);
> +
> + if (!ptr)
> + panic("%pS: Failed to allocate %zu bytes align=%zx nid=%d from=%llx\n",
> + __func__, size, size, node, (u64)__pa(MAX_DMA_ADDRESS));
> +
> + return ptr;
> +}
>
> extern pgd_t early_pg_dir[PTRS_PER_PGD];
> asmlinkage void __init kasan_early_init(void)
> @@ -83,6 +96,40 @@ static void __init populate(void *start, void *end)
> memset(start, 0, end - start);
> }
>
> +void __init kasan_shallow_populate(void *start, void *end)
> +{
> + unsigned long vaddr = (unsigned long)start & PAGE_MASK;
> + unsigned long vend = PAGE_ALIGN((unsigned long)end);
> + unsigned long pfn;
> + int index;
> + void *p;
> + pud_t *pud_dir, *pud_k;
> + pgd_t *pgd_dir, *pgd_k;
> + p4d_t *p4d_dir, *p4d_k;
> +
> + while (vaddr < vend) {
> + index = pgd_index(vaddr);
> + pfn = csr_read(CSR_SATP) & SATP_PPN;
> + pgd_dir = (pgd_t *)pfn_to_virt(pfn) + index;
> + pgd_k = init_mm.pgd + index;
> + pgd_dir = pgd_offset_k(vaddr);
> + set_pgd(pgd_dir, *pgd_k);
> +
> + p4d_dir = p4d_offset(pgd_dir, vaddr);
> + p4d_k = p4d_offset(pgd_k, vaddr);
> +
> + vaddr = (vaddr + PUD_SIZE) & PUD_MASK;
> + pud_dir = pud_offset(p4d_dir, vaddr);
> + pud_k = pud_offset(p4d_k, vaddr);
> +
> + if (pud_present(*pud_dir)) {
> + p = early_alloc(PAGE_SIZE, NUMA_NO_NODE);
> + pud_populate(&init_mm, pud_dir, p);
> + }
> + vaddr += PAGE_SIZE;
> + }
> +}
> +
> void __init kasan_init(void)
> {
> phys_addr_t _start, _end;
> @@ -90,7 +137,15 @@ void __init kasan_init(void)
>
> kasan_populate_early_shadow((void *)KASAN_SHADOW_START,
> (void *)kasan_mem_to_shadow((void *)
> - VMALLOC_END));
> + VMEMMAP_END));
> + if (IS_ENABLED(CONFIG_KASAN_VMALLOC))
> + kasan_shallow_populate(
> + (void *)kasan_mem_to_shadow((void *)VMALLOC_START),
> + (void *)kasan_mem_to_shadow((void *)VMALLOC_END));
> + else
> + kasan_populate_early_shadow(
> + (void *)kasan_mem_to_shadow((void *)VMALLOC_START),
> + (void *)kasan_mem_to_shadow((void *)VMALLOC_END));
>
> for_each_mem_range(i, &_start, &_end) {
> void *start = (void *)_start;

Thanks, this is on for-next.

\
 
 \ /
  Last update: 2021-01-23 04:58    [W:0.115 / U:0.240 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site